62A Series Jambliner Balance

62A Series Jambliner Balances. 1/2" ribbed window channel balance for jamb liners. Commonly referred to as D70 balances. Used on tilt windows. Instead of replacing your jambliner, you can replace the block and tackle balance springs only.

Ordering Information
1) Measure metal channel length. Do not include any attached ends.
2) Check number stamped on channel. (e.g. 16, 16HD, 16TG, etc.)
3) Select our corresponding part number from the chart below.
4) Identify the appropriate end bracket to (-2, -5, -9, -12, -14, -16, -17).
5) Note -2, -12 are available in white and black. White will automatically be attached to regular balances; black will automatically be attached to HD, TG and XHD balances.