62FC Tilt Window Channel Balance

62FC Series Channel Balance for Tilt Windows. 1/2" x 1/2" channel balance spring. Countersunk hole and 62-689 screw support are standard for our 62FC series balances.

Ordering Information:
1) Measure metal channel length (Do not include any attached ends).
2) Identify number stamped on channel. (e.g., 21A, 24B, etc.)
3) Select our corresponding part number from below with the appropriate balance cord end for your window.

General Information:
1) Please note that the 1/2" channel height is smaller than the usual 19/32" height on standard balances.
2) If metal channel length does not correspond with the number stamped on balance, please contact us since your balance may be a special order.