Ashland Multi Point Lock 56-246

JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Model: 56-246

Ashland active multipoint door lock. Backset: 2 3/8" (60mm). Face Plate Width: 1-1/16". Deadbolt throw is 1". Faceplate Length: 16". Screw Hole Spacing: 9.37". Used on Jeldwen and Weathershield doors. Patent 6,209,931. 5/16-18 thread for shootbolt rods. Ashland Lock W5110STACT8. Markings on Back of Faceplate: S-5111-1.
Non-handed. (See below on how to reverse handing.)

If your faceplate is 7/8" wide, you need 56-850.

Reviews

Customers who bought this product also purchased

Solid Square Spindle 120mm x 8mm Handle Spindle 519170

Hoppe 120mm x 8 mm Handle Spindle 517565

Handle Bushing 16-510

How To Reverse the Handing on an Ashland Single Point Door Lock.
Refer to Photo below

1. Before the latch is installed. Locate the Latch Release mechanism. With a screw driver or similar tool. Push it into the hole and move it up until the latch pops out of the housing. Remove tool.

2 & 3 Rotate the Latch 180 degrees. With your finger push the Latch back into the housing.

Or visit this video. https://www.youtube.com/watch?v=QbFzvtXi6JE

Ashland Multipoint Door Lock 56-246

$246.02

Customers who bought this product also purchased

Solid Square Spindle 120mm x 8mm Handle Spindle 519170

Hoppe 120mm x 8 mm Handle Spindle 517565

Handle Bushing 16-510