Hinge -Removable Pin 56-179brs


Color Satin Brass. 1 pair Steel Plain Bearing Butt Hinges with Removable Pin (Non-Rising). These hin......see more

Color Satin Brass. 1 pair Steel Plain Bearing Butt Hinges with Removable Pin (Non-Rising). These hinges are packed and sold by the pairs only. All hinges supplied with flat head phillips screws.…

Hinge Installation Tool 59-180


Hinge Installation tool.......see more

Hinge Installation tool.…

Hinge Oil Rubbed Bronze 56-542ORBZ


4" x 4" ball bearing hinge with 5/8" radius. Color: Oil rubbed bronze. Priced each in......see more

4" x 4" ball bearing hinge with 5/8" radius. Color: Oil rubbed bronze. Priced each individually, sold in mulitiples of 2. ***Special order. Allow 3 to 4 weeks for shipping.…

Hinge Pin Door Stop 19-142CH


Hinge pin door stop color Chrome......see more

Hinge pin door stop color Chrome…

HLS 7 LH Gear with Swinghook Extension 2664231


Hoppe HLS7 Multipoint 1.77" Backset Gear with Swing Hook Bottom Extension, LH The ......see more

Hoppe HLS7 Multipoint 1.77" Backset Gear with Swing Hook Bottom Extension, LH The Active Swinghook version offers the highest level of security through the swinghooks which extends the reach into the door frame farther than the Active Tongue version. The Active Swinghook pulls the door into the frame for added protection against extreme weather conditions. All HLS 7 Series have a 45mm Backset and a 25.4mm Deadbolt Throw. Door handing is always determined from the exterior. When hinges are on the left, the door is LH; when hinges are on the right, door is RH.
Inswing or outswing does not determine handing.  If you need the exact part please call or email sales@windowanddoorparts.us.  ***Not always in stock, may take 3 to 4 weeks to ship.   Hoppe  Number Description Backset Deadbolt Throw Handle Height Bottom Swing Hook Position Max Cutoff Handing 2664231 M/45/25 914 LI SW 753 16S 45mm
(1.77) 25.4mm
(1.00) 914mm
(36.00) 753mm
(29.65) N/A LH …

HLS 7 LH Gear with Swinghook/ Shootbolt Extension 2666498


Hoppe LH HLS7 Multipoint 1.75" Backset Manual Gear with Swinghook/ Shootbolt Bottom E......see more

Hoppe LH HLS7 Multipoint 1.75" Backset Manual Gear with Swinghook/ Shootbolt Bottom Extension Manual version engages multipoint when door handle is lifted.The strongest multipoint we offer.The Active Swinghook / Shootbolt version offers the highest level of security through the swinghooks which extend the reach into the door frame for added protection against extreme weather conditions. The Shootbolts engage into both the head and sill of the door frame for added confidence and security. The Active Swinghook / Shootbolt version offers the maximum strength both horizontally and vertically. Hoppe  Number Description Orientation Backset Deadbolt Throw Handle Height Bottom Locking Position Max Cutoff 2666498 M/45/25 914 RE SWS 620 16S 25 LH 45mm
(1.75) 25mm
(1.00) 914mm
(36.00) 620mm
(24.41) N/A …

HLS 7 LH Inactive Shootbolt Rod Lock Gear 2661013


Hoppe LH HLS 7 Multipoint 1.75" Backset Inactive Gear Only for Rod Lock The Inactive Rod Loc......see more

Hoppe LH HLS 7 Multipoint 1.75" Backset Inactive Gear Only for Rod Lock The Inactive Rod Lock version can be used when there is no astragal between the door panels of a French door or used with an astragal to conceal the faceplate. The handle-operated Inactive Rod Lock secures the door at the head and sill of the door frame while allowing the active lock to engage into the inactive panel. ***Special order, allow 3 to 4 weeks to ship. Hoppe  Number Description Orientation Backset Deadbolt Throw 2661013 IA/45 16S 25 LH 45mm
(1.75) 25mm
(1.00) …

HLS 7 Lock Top Extension Swinghook - Shootbolt 3066021


Hoppe HLS7 Multipoint Door Top Extension with Upper Swing Hook and Shootbolt.  Commonly used o......see more

Hoppe HLS7 Multipoint Door Top Extension with Upper Swing Hook and Shootbolt. 
Commonly used on Kawneer 2000T terrace doors with middle extension 2667343 (sold separately). The Active Swinghook / Shootbolt version offers the highest level of security through the swinghooks which extend the reach into the door frame for added protection against extreme weather conditions. The Shootbolts engage into both the head and sill of the door frame for added confidence and security. The Active Swinghook / Shootbolt version offers
the maximum strength both horizontally and vertically. ***Special order, non-returnable. Allow 3 to 4 weeks to ship. If you need help locating the part for your door, please call or email sales@windowanddoorparts.us.    Hoppe Swinghook - Shootbolt Top Extension - 16mm Faceplate Part Number  Description  Overall Length with 914mm (36”) Handle Height) Extension Length  Top Swing Hook Position  Maximum Cutoff  3066021 M 798.7 SW1 SB1 329.4 16-SC NA 798.7mm
(31.44) 329.4mm
(12.96) NA …

HLS 7 Middle Extension 2665495


Middle extension for HLS 7 system. 16mm faceplate.......see more

Middle extension for HLS 7 system. 16mm faceplate.…

HLS 7 RH Gear with Swinghook Extension 2716635


Hoppe HLS7 Multipoint 1.77" Backset Gear with Swing Hook Bottom Extension, RH The ......see more

Hoppe HLS7 Multipoint 1.77" Backset Gear with Swing Hook Bottom Extension, RH The Active Swinghook version offers the highest level of security through the swinghooks which extends the reach into the door frame farther than the Active
Tongue version. The Active Swinghook pulls the door into the frame for added protection against extreme weather conditions. All HLS 7 Series have a 45mm Backset and a 25.4mm Deadbolt Throw. Door handing is always determined from the exterior. When hinges are on the left, the door is LH; when hinges are on the right, door is RH.
Inswing or outswing does not determine handing.  If you need help locating the correct part for your door, please call or email sales@windowanddoorparts.us. **Not always in stock, may take 3 to 4 weeks to ship. Hoppe  Number Description Backset Deadbolt Throw Handle Height Bottom Swing
Hook Position Max Cutoff Handing 2716635 M/45/25 914 RE SW 620 16S 45mm
(1.77) 25.4mm
(1.00) 914mm
(36.00) 620mm
(24.41) N/A RH …

HLS 7 RH Gear with Swinghook Extension 2716643


Hoppe HLS7 Multipoint 1.77" Backset Gear with Swing Hook Bottom Extension, RH The ......see more

Hoppe HLS7 Multipoint 1.77" Backset Gear with Swing Hook Bottom Extension, RH The Active Swinghook version offers the highest level of security through the swinghooks which extends the reach into the door frame farther than the Active
Tongue version. The Active Swinghook pulls the door into the frame for added protection against extreme weather conditions. All HLS 7 Series have a 45mm Backset and a 25.4mm Deadbolt Throw. Door handing is always determined from the exterior. When hinges are on the left, the door is LH; when hinges are on the right, door is RH.
Inswing or outswing does not determine handing.  If you need the exact part please call or email sales@windowanddoorparts.us.   Hoppe  Number Description Backset Deadbolt Throw Handle Height Bottom Swing Hook Position Max Cutoff Handing 2716643 M/45/25 914 RE SW 753 16S 45mm
(1.77) 25.4mm
(1.00) 914mm
(36.00) 753mm
(29.65) N/A RH …

HLS 7 RH Gear with Swinghook/ Shootbolt Extension 2716627


Hoppe RH HLS 7 Multipoint 1.75" Backset Manual Gear with Swinghook/ Shootbolt Bottom ......see more

Hoppe RH HLS 7 Multipoint 1.75" Backset Manual Gear with Swinghook/ Shootbolt Bottom Extension Manual version engages multipoint when door handle is lifted.The strongest multipoint we offer.The Active Swinghook / Shootbolt version offers the highest level of security through the swinghooks which extend the reach into the door frame for added protection against extreme weather conditions. The Shootbolts
engage into both the head and sill of the door frame for added confidence and security. The Active Swinghook / Shootbolt version offers
the maximum strength both horizontally and vertically. Hoppe  Number Description Orientation Backset Deadbolt Throw Handle Height Bottom Locking Position Max Cutoff 2716627 M/45/25 914 RE SWS 620 16S 25 RH 45mm
(1.75) 25mm
(1.00) 914mm
(36.00) 620mm
(24.41) N/A …

HLS 7 Spring Cartridge 2702170


Hoppe HLS7 door handle spring cartridge. 1 each per backplate.......see more

Hoppe HLS7 door handle spring cartridge. 1 each per backplate.…

HLS 7 Top Exrension Swinghook 2663051


Hoppe HLS7 Top Extension with Swing Hook 66.43" The Active Swinghook version offers&nbs......see more

Hoppe HLS7 Top Extension with Swing Hook 66.43" The Active Swinghook version offers the highest level of security through the swinghooks which extends the reach into the door frame farther than the Active
Tongue version. The Active Swinghook pulls the door into the frame for added protection against extreme weather conditions. For 9' 0" door panel with 914mm (36") handle height. If you need the exact part please call or email sales@windowanddoorparts.us.    Swinghook Top  Extension 16mm Faceplate Part Number  Description  Overall Length with 914mm (36”) Handle Height) Extension Length  Top Swing Hook Position  2nd Top Swing Hook Position  Maximum Cutoff  2663051 M 1687.2 SW 1193 16S 530 2213.2mm- 2743.2mm
(87.13 - 108.00) 1687.2mm
(66.43) 1193mm
(46.97) N/A 530mm
(20.87) …

HLS 7 Top Extension Swinghook 2663035


Hoppe HLS7 Top Extension with Swing Hook 42.43" The Active Swinghook version offers&nbs......see more

Hoppe HLS7 Top Extension with Swing Hook 42.43" The Active Swinghook version offers the highest level of security through the swinghooks which extends the reach into the door frame farther than the Active
Tongue version. The Active Swinghook pulls the door into the frame for added protection against extreme weather conditions. For 6' 10" and 7' 0" door panel with 914mm (36") handle height. If you need the exact part please call or email sales@windowanddoorparts.us.    Swinghook Top  Extension 16mm Faceplate Part Number  Description  Overall Length with 914mm (36”) Handle Height) Extension Length  Top Swing Hook Position  Maximum Cutoff  2663035 M 1077.6 SW 743 16S 370 1763.6mm - 2133.6mm
(69.43 - 84.00) 1077.6mm
(42.43) 743mm
(29.25) 530mm
(20.87) …

HLS 7 Top Extension Two Swinghooks 11507226


Hoppe HLS7 Multipoint Door Top Extension with Two Upper Swing Hooks at 29.25" and 46.97".&......see more

Hoppe HLS7 Multipoint Door Top Extension with Two Upper Swing Hooks at 29.25" and 46.97". 
For 8' door panel with 914mm (36") handle height. The Active Swinghook version offers the highest level of security through the swinghooks which extends the reach into the door frame farther than the active tongue version. The Active Swinghook pulls the door into the frame for added protection against extreme weather conditions. ***Special order, non-returnable. Allow 3 to 4 weeks to ship. If you need help locating the part for your door, please call or email sales@windowanddoorparts.us.    Hoppe Swinghook Top Extension - 16mm Faceplate Part Number  Description  Overall Length with 914mm (36”) Handle Height) Extension Length  Top Swing Hook Position  Top Swing Hook Position #2 Maximum Cutoff  11507226 M SW2 743/1193 16S NA NA 743mm
(29.25) 1193mm
(46.97) NA …

HLS 7 Top Shootbolt Extension 2666359


Top shootbolt extension for HLS 7 system. 16mm faceplate.......see more

Top shootbolt extension for HLS 7 system. 16mm faceplate.…

HLS7 LH Gear with Shootbolt Extension 2664214


Left hand Gear with Shootbolt extension. 16mm faceplate.......see more

Left hand Gear with Shootbolt extension. 16mm faceplate.…

HLS7 Middle Extension 2665516


Hoppe HLS7 Multipoint Shootbolt Middle extension for HLS 7 system. 16mm faceplate.......see more

Hoppe HLS7 Multipoint Shootbolt Middle extension for HLS 7 system. 16mm faceplate.…

HLS7 RH Gear with Shootbolt Extension 2717179


Right hand Gear with Shootbolt extension. 16mm faceplate.......see more

Right hand Gear with Shootbolt extension. 16mm faceplate.…

HLS7 Rodos Active Handle Set 2745321


Hoppe Rodos for on 1 3/4" door. Active Door Handle, Brushed Chrome Hoppe M1603/2167N Rodos s......see more

Hoppe Rodos for on 1 3/4" door. Active Door Handle, Brushed Chrome Hoppe M1603/2167N Rodos series. Key cylinder included. Used mainly on the HLS 7 multipoint system. Not always in stock, please call to check. May take 3-4 weeks to ship. This handle set is for a 1 3/4" door. If needed for a thicker door, please call 727-386-4629 Hoppe  Number Description Door Thickness Color 2745321 Active Door Set -M1603/2167NZS/KM 45mm
(1.75) Brushed Chrome (F77-R) …

HLS7 Rodos Active Handle Set 2745663


Hoppe Rodos for on 1 3/4" door. Active Door Handle, Oil Rubbed Brass Hoppe M1603/2167N ......see more

Hoppe Rodos for on 1 3/4" door. Active Door Handle, Oil Rubbed Brass Hoppe M1603/2167N Rodos series. Key cylinder included. Used mainly on the HLS 7 multipoint system.  Not always in stock, please call to check. May take 3-4 weeks to ship. This handle set is for a 1 3/4" door. If needed for a thicker door, please call 727-386-4629 Hoppe  Number Description Door Thickness Color 2745663 Active Door Set -M1603/2167NZS/KM 45mm
(1.75) Oil Rubbed Brass (F79) …

HLS7 Rodos Active Handle Set 2745698


Hoppe Rodos for 1 3/4" door. Active Door Handle, Satin Nickel Hoppe M1603/2167N Ro......see more

Hoppe Rodos for 1 3/4" door. Active Door Handle, Satin Nickel Hoppe M1603/2167N Rodos series. Key cylinder included. Used mainly on the HLS 7 multipoint system. Not always in stock, please call to check. May take 3-4 weeks to ship. This handle set is for a 1 3/4" door. If needed for a thicker door, please call 727-386-4629 Hoppe  Number Description Door Thickness Color 2745698 Active Door Set -M1603/2167NZS/KM 45mm
(1.75) Satin Nickel (F42-R) …

HLS7 Rodos Active Handle Set 3048721


Hoppe Rodos Multipoint Door Handle Set for 2-1/4" thick door with Offset. Active Door Handle, B......see more

Hoppe Rodos Multipoint Door Handle Set for 2-1/4" thick door with Offset. Active Door Handle, Brushed Chrome Hoppe M1603/2167N Rodos series complete active handle set for 2-1/4 inch thick door with offset multipoint lock. Key cylinder included. Used on the Hoppe HLS 7 multipoint system.  This HLS7 handle set is used by Kawneer on 2.25" thick offset door. The spindle shafts are offset 1 @ 8x62.5mm, 1 @ 8x76.25mm Not always in stock. May take 3 to 4 weeks to ship. Hoppe  Number Description Door Thickness Color 3048721 Active Door Set -M1603/2167NZS/KM 57mm
(2.25) Brushed Chrome (F41-R) …

HLS7 Rodos Inactive Handle Set 2749648


Hoppe Rodos for 1 3/4" door. Inactive Door Handle, Oil Rubbed Brass Hoppe M1603/2167N&n......see more

Hoppe Rodos for 1 3/4" door. Inactive Door Handle, Oil Rubbed Brass Hoppe M1603/2167N Rodos series. Key cylinder included. Used mainly on the HLS 7 multipoint system. Not always in stock, please call to check. May take 3-4 weeks to ship. This handle set is for a 1 3/4" door. If needed for a thicker door, please call 727-386-4629 Hoppe  Number Description Door Thickness Color 2749648 Inactive Door Set -M1603/2167NZS/M 45mm
(1.75) Oil Rubbed Brass (F79) …

HLS7 Rodos Inactive Handle Set 2749681


Hoppe Rodos Inactive Door Handle Set, Satin Nickel. For 1-3/4" thick doors. Hoppe......see more

Hoppe Rodos Inactive Door Handle Set, Satin Nickel. For 1-3/4" thick doors. Hoppe M1603/2167N Rodos series handle. Inactive handle has an interior thumbturn only. No exterior key lock. Used on the Hoppe HLS 7 multipoint system.  This handle set is for a 1 3/4" door. If needed for a thicker door, please call 727-386-4629. ***Special order, non-returnable. Allow 3 to 4 weeks to ship. Hoppe  Number Description Door Thickness Color 2749681 Inactive Door Set -M1603/2167NZS/M 45mm
(1.75) Satin Nickel (F42-R) …

HLS7 Rodos Inactive Handle Set 3048755


Hoppe Rodos Handle Set for 2-1/4" thick door. Inactive Door Handle, Brushed Chrome Hopp......see more

Hoppe Rodos Handle Set for 2-1/4" thick door. Inactive Door Handle, Brushed Chrome Hoppe M1603/2167N Rodos series. Used mainly on the HLS 7 multipoint system.  Special order, non-returnable. Allow 3-4 weeks to ship. This handle set is for a2-1/4 thick" door. If needed for a thicker door, please call 727-386-4629 Hoppe  Number Description Door Thickness Color 3048755 Inactive Door Set -M1603/2167NZS/M 57mm
(2.25) Brushed
Chrome (F41-R) …

Hook Bolt Lock Mechanism - 3-Point 56-351


Andersen Fleetwood hinged doors multipoint door lock replacement 2579771 - 3P. Used on doors fr......see more

Andersen Fleetwood hinged doors multipoint door lock replacement 2579771 - 3P. Used on doors from 1988 to present. Length 76-13/32". Door size 6' 8"
Active 3 point multi point locking system with hooks. Faceplate stamped: 2579771. Andersen Part: FWH68.

Note: Stainless steel active lock mechanism replaces all previous vintage active lock mechanisms.
This lock replaces part number 2579512, a gold colored zinc dichromate lock mechanism.…

Hook Bolt Lock Mechanism - 3-Point 56-352


Andersen Fleetwood hinged doors multipoint door lock replacement 2579772 - 3P. Used on doors fr......see more

Andersen Fleetwood hinged doors multipoint door lock replacement 2579772 - 3P. Used on doors from 1988 to present. Length 79-9/32". Door size 6' 11"
Active 3 point multi point locking system with hooks. Faceplate stamped: 2579585 or 2579772. Andersen Part: FWH611.

Note: Stainless steel active lock mechanism replaces all previous vintage active lock mechanisms.
This lock replaces part number 2579512, a gold colored zinc dichromate lock mechanism.…

Hook Bolt Lock Mechanism - 3-Point 56-353


Andersen Fleetwood hinged doors multipoint door lock replacement 2579773 - 3P. Used on doors fr......see more

Andersen Fleetwood hinged doors multipoint door lock replacement 2579773 - 3P. Used on doors from 1988 to present. Length 92-13/32". Door size 8'.
Active 3 point multi point locking system with hooks. Faceplate stamped: 2579773. Andersen Part: FWH80.

Note: Stainless steel active lock mechanism replaces all previous vintage active lock mechanisms.
This lock replaces part number 2579514, a gold colored zinc dichromate lock mechanism.…

Hook Bolt Lock Mechanism - 3-Point 56-606


Andersen 200 Series hinged doors 3 point door lock. Active 3 point multipoint locking system with ho......see more

Andersen 200 Series hinged doors 3 point door lock. Active 3 point multipoint locking system with hook bolts. Andersen Lock 2591675. This lock fits ALL Andersen 200 Series Inswing Door panels.
Length: 62-1-2 inches with Radius Ends. Fits door panel heights: 6-8 (76-3/4 inches), 6-11 (79-5/8 inches), 7-6 (86-3/4 inches), 8-0 (92-3/4 inches)
Note: Stainless steel active lock mechanism replaces all previous vintage active lock mechanisms.

This lock has radius ends. ***Special order, non-returnable. Allow 2 to 3 weeks to ship.…

Hook for Velux 39-755


Hook for Velux Operator......see more

Hook for Velux Operator…

Hope's Face Mount Casement Operator LH 36-117B


Hope's casement window crank operator with 9" arm with metal button. Left Hand. Color: Brow......see more

Hope's casement window crank operator with 9" arm with metal button. Left Hand. Color: Brown. 4-1/8" Mounting Hole Centers. Handle Included. CWO 9 L Face mount window operator. Right Hand: 36-119B…

Hope's Face Mount Casement Operator RH 36-119B


Hope's casement window crank operator with 9" arm with metal button. Right Hand. Color: Bro......see more

Hope's casement window crank operator with 9" arm with metal button. Right Hand. Color: Brown. 4-1/8" Mounting Hole Centers. Handle Included. CWO 9 R Face mount window operator. Left Hand: 36-117B…

Hoppe 120mm x 8 mm Handle Spindle 517565


120 mm x 8mm door split handle spindle for Hoppe door handles. For 1-3/4" thick doors. Hoppe ......see more

120 mm x 8mm door split handle spindle for Hoppe door handles.
For 1-3/4" thick doors.
Hoppe spindle 517565.…

Hoppe 140mm x 8mm  Handle Spindle 517589


140 mm x 8mm door split handle profile spindle for Hoppe handlesFor 2 1/4" doors Hoppe part number ......see more

140 mm x 8mm door split handle profile spindle for Hoppe handles
For 2 1/4" doors
Hoppe part number 517589.…

Hoppe 160mm x 8mm  Handle Spindle 519200


160mm x 8mm door split handle profile spindle for Hoppe handles Handle for doors larger than 2-1/4&......see more

160mm x 8mm door split handle profile spindle for Hoppe handles
Handle for doors larger than 2-1/4" doors.
Hoppe part number 519200.…

Hoppe 2246 Inactive Exterior Handle Backplate 3811589


Hoppe 2246 Exterior Handle Backplate Without Cylinder Hole, Silver. Hoppe 2246 series aluminum ha......see more

Hoppe 2246 Exterior Handle Backplate Without Cylinder Hole, Silver. Hoppe 2246 series aluminum handle backplate. For inactive door handle sets without exterior key. ***Special order, non-returnable. Allow 3-4 weeks to ship. Hoppe  Number Description Color 3811589 Exterior backplate PZ
(NO cylinder hole) Silver …

Hoppe 90 degree European Key Cylinder 3442488


Hoppe Full Key Cylinder for 3" thick doors with Offset lock. Color: Oil Rubbed Brass. 60.5/31.5......see more

Hoppe Full Key Cylinder for 3" thick doors with Offset lock. Color: Oil Rubbed Brass. 60.5/31.5 Euro Profile Cylinder. Length: 92mm (3.62"). 90 degree cylinder with Crescent Knob. For use on Active doors. This cylinder can be converted to a 360 degree cylinder. Distance A Outside Distance B Typical Panel Thickness (inches) Oil Rubbed Brass 60.5 31.5 2-1/2" 3442488 …

Hoppe 90 Degree Half Cylinder 3142611


Hoppe Half Cylinder for 1-3/4" thick doors. Color: Resista Polished Brass. 31.5/ 10 Hoppe Half ......see more

Hoppe Half Cylinder for 1-3/4" thick doors. Color: Resista Polished Brass. 31.5/ 10 Hoppe Half profile cylinder used on inactive door panels. New Style 90 degree Hoppe profile cylinder with Cresent Knob.
This is a Non-keyed cylinder and typically used on inactive / passive doors. This cylinder can be converted to a 360 degree cylinder.     Inside
Distance Outside
Distance Typical Panel
Thickness (inches) Resista Brass
(F77-R) 31.5 10 1-3/4" 3142611 …

Manufacturers
  • 0 items