Truth round knob window operator handle replacement with 11/32" spline size. Color: White. Used on Truth's casement and awning window operators.…
Truth round knob window operator handle replacement with 11/32" spline size. Color: Bronze. Used on Truth's casement and awning window operators.…
Left Hand Truth SafeGuard 2R Window Opening Control Device for Casement windows. Standard version. Limit device.
Ordering Instructions:
1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device.
2. Confirm the hinge cavity on your casement window. The hinge cavity needs to be .719 (23/32") wide x .438 (7/16") deep. Note: The SafeGard™ 2R Limiting Control Device will only work in casement windows that have a standard hinge cavity with measurements as stated above.
Includes: Arm Assembly, Track Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions
General Info:
The SafeGard™ 2 R is the Industry's first limiting control device offered for casement windows.
The SafeGard™ 2R Limit Device was tested & certified to meet ASTM F2090-10 code requirements. The ASTM F2090 addresses window fall prevention, that helps protect against potential falls by children through open windows.
The SafeGard™ Limit Device provides a means that will limit the venting of the window to less than 4".
As required by code, the SafeGard™ 2R Limit Device has a two (2) action operation to fully open the window for egress purposes. This operation can be performed without the use of keys or tools.
Easy to follow opening and release instructions appear on the vent arm. Note: The device will re-latch or reset automatically when window is in closed position.
The SafeGard™ Limit Device's track, arm and rivet are made entirely of authentic stainless steel with Delran cover and tab.
The SafeGard™ Limit Device is reliable, easy to install and easy to operate. This device meets today's more stringent safety requirements. Please consult local building codes for WOCD and applicable requirements.…
Right Hand Truth SafeGuard 2R Window Opening Control Device for Casement windows. Standard version. Limiting control device.
Ordering Instructions:
1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device.
2. Confirm the hinge cavity on your casement window. The hinge cavity needs to be .719 (23/32") wide x .438 (7/16") deep. Note: The SafeGard™ 2R Limiting Control Device will only work in casement windows that have a standard hinge cavity with measurements as stated above.
Includes: Arm Assembly, Track Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions
General Info:
The SafeGard™ 2 R is the Industry's first limiting control device offered for casement windows.
The SafeGard™ 2R Limit Device was tested & certified to meet ASTM F2090-10 code requirements. The ASTM F2090 addresses window fall prevention, that helps protect against potential falls by children through open windows.
The SafeGard™ Limit Device provides a means that will limit the venting of the window to less than 4".
As required by code, the SafeGard™ 2R Limit Device has a two (2) action operation to fully open the window for egress purposes. This operation can be performed without the use of keys or tools.
Easy to follow opening and release instructions appear on the vent arm. Note: The device will re-latch or reset automatically when window is in closed position.
The SafeGard™ Limit Device's track, arm and rivet are made entirely of authentic stainless steel with Delran cover and tab.
The SafeGard™ Limit Device is reliable, easy to install and easy to operate. This device meets today's more stringent safety requirements. Please consult local building codes for WOCD and applicable requirements.…
Truth SafeGuard limiting control device for casement windows. Left Hand. WOCD.
Ordering Instructions:
1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device.
2. Confirm the hinge cavity on your casement window. The hinge cavity needs to be .719 (23/32") wide x .438 (7/16") deep.
Note: The SafeGard™ Limiting Control Device will only work in casement windows that have a standard 2-bar hinge cavity with measurements as stated above. This device is not designed for casement windows with a 4-bar hinge.
Includes: Arm Assembly, Track Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions
General Info:
The SafeGard™ is the Industry's first limiting control device offered for casement windows.
The SafeGard™ Limit Device was tested & certified to meet ASTM F2090-10 code requirements. The ASTM F2090 addresses window fall prevention, that helps protect against potential falls by children through open windows.
The SafeGard™ Limit Device provides a means that will limit the venting of the window to less than 4".
As required by code, the SafeGard™ Limit Device has a two (2) action operation to fully open the window for egress purposes. This operation can be performed without the use of keys or tools.
Easy to follow opening and release instructions appear on the vent arm. Note: The device will re-latch or reset automatically when window is in closed position.
The SafeGard™ Limit Device's track, arm and rivet are made entirely of authentic stainless steel with Delran cover and tab.
The SafeGard™ Limit Device is reliable, easy to install and easy to operate. This device meets today's more stringent safety requirements. Please consult local building codes for WOCD and applicable requirements.…
Truth SafeGuard limiting control device for casement windows. Right Hand. WOCD.
Ordering Instructions:
1. Determine window handing by viewing from the outside looking in. If the casement window hinge is on the right side, you need a right hand limiting device.
2. Confirm the hinge cavity on your casement window. The hinge cavity needs to be .719 (23/32") wide x .438 (7/16") deep.
Note: The SafeGard™ Limiting Control Device will only work in casement windows that have a standard 2-bar hinge cavity with measurements as stated above. This device is not designed for casement windows with a 4-bar hinge.
Includes: Arm Assembly, Track Assembly, Template, Window Label, Screw Pack (4 screws) and Operating and Installation Instructions
General Info:
The SafeGard™ is the Industry's first limiting control device offered for casement windows.
The SafeGard™ Limit Device was tested & certified to meet ASTM F2090-10 code requirements. The ASTM F2090 addresses window fall prevention, that helps protect against potential falls by children through open windows.
The SafeGard™ Limit Device provides a means that will limit the venting of the window to less than 4".
As required by code, the SafeGard™ Limit Device has a two (2) action operation to fully open the window for egress purposes. This operation can be performed without the use of keys or tools.
Easy to follow opening and release instructions appear on the vent arm. Note: The device will re-latch or reset automatically when window is in closed position.
The SafeGard™ Limit Device's track, arm and rivet are made entirely of authentic stainless steel with Delran cover and tab.
The SafeGard™ Limit Device is reliable, easy to install and easy to operate. This device meets today's more stringent safety requirements. Please consult local building codes for WOCD and applicable requirements.…
Amesbury Truth Sentry Active Swing Door Handle Set, Black. Classic Series. Non-handed. Active handle set with interior thumbturn and exterior key lock, includes 2 keys. For door thicknesses from 1-3/4" to 2-1/4". American style cylinder. Can be used as handle above or below. ***Special order, Allow around 1 to 2 weeks to ship.…
Amesbury Truth Sentry Dummy Swing Door Handle Set, Black. Classic Series. Handles are fixed and do not move. For door thicknesses from 1-3/4" to 2-1/4". Non-Handed. American style cylinder. Handle can be used as above or below. ***Special order, Allow around 1 to 2 weeks to ship.…
Amesbury Truth Sentry In-Active Swing Door Handle Set, Black. Classic Series. In-Active handle set with interior thumbturn only. No exterior key lock. For door thicknesses from 1-3/4" to 2-1/4". Non-handed. American style cylinder. Can be used as handle above or below. ***Special order, non-returnable. Allow around 2 to 4 weeks to ship.…
Truth Sentry Multipoint Shootbolt Lock, Active 1.77"
3 point shootbolt locking system. Includes gear and bottom extension with shootbolt. Top extension sold separtately.
***Special order, non returnable. Minimum order 4. Allow 3 to 4 weeks for shipping.
Part
Number
Handle
Height
Backset
Faceplate
857-10008
36"
45mm
(1.77)
16mm
(0.63)
…
Truth Sentry skylight window operator alignment collar. For Sentry 2000 window operators. Sold each. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
Truth Sentry Active Multipoint Door Lock with Lower Tongue and Shootbolt. 1-3/4" Backset. 16mm Faceplate Width.
Includes gear and bottom extension with tongue and shootbolt for Truth sentry 5 point locking system. Top extension sold separately.
***Special order, non returnable. Allow 2 weeks to ship.
Part
Number
Handle
Height
Backset
Faceplate
857-10029
36"
45mm
(1.77)
16mm
(0.63)
…
Truth single arm casement window operator, Left Hand. Encore series sill mounted window crank operator. Maxim series operator replacement.
The Encore family of operators are engineered to incorporate all the strengths and performance characteristics as Truth's Maxim® Series
The Encore series single arm operator is designed for narrow windows and will operate sash sizes from 20" to 32" wide, up to 72" high and weighing up to 73 lbs..
Handle and cover sold separately.
Right Hand Operator: 36-403EN…
Truth single arm casement operator with roller at the end of the arm, Left Hand. Encore series low profile sill mounted window crank operator. Maxim series operator replacement for 36-428-3 maxim operator.
The Encore family of operators are engineered to incorporate all the strengths and performance characteristics as Truth's Maxim® Series
The Encore series single arm low profile operator is designed for narrow windows and will operate sash sizes from 20" to 32" wide, up to 72" high and weighing up to 73 lbs.
Handle and cover sold separately.
Right hand Operator 36-403ENLP…
Truth single arm casement window operator, Right Hand. Encore series sill mounted window crank operator. Maxim series operator replacement.
The Encore family of operators are engineered to incorporate all the strengths and performance characteristics as Truth's Maxim® Series
The Encore series single arm operator is designed for narrow windows and will operate sash sizes from 20" to 32" wide, up to 72" high and weighing up to 73 lbs..
Handle and cover sold separately.
Left Hand Operator: 36-402EN…
Truth single arm casement operator with roller at the end of the arm, Right Hand. Encore series low profile sill mounted window crank operator. Maxim series operator replacement for 36-429-3 maxim operator.
The Encore family of operators are engineered to incorporate all the strengths and performance characteristics as Truth's Maxim® Series
The Encore series single arm low profile operator is designed for narrow windows and will operate sash sizes from 20" to 32" wide, up to 72" high and weighing up to 73 lbs.
Handle and cover sold separately.
Left Hand Operator: 36-402ENLP…
Truth dual arm low profile casement operator, Left Hand. Sill mounted window crank operator. Maxim series operator replacement for 36-464-3.
The Encore family of operators are engineered to incorporate all the strengths and performance characteristics as Truth's Maxim® Series
The Encore series dual arm low profile operator is designed to operate sash sizes from 24" to 40" wide, up to 84" high and weighing up to 108 lbs.
Handle and cover sold separately.
Right Hand Operator: 36-468EN…
Truth dual arm low profile casement operator, Right Hand. Sill mounted window crank operator. Maxim series operator replacement for 36-465-3.
The Encore family of operators are engineered to incorporate all the strengths and performance characteristics as Truth's Maxim® Series
The Encore series dual arm low profile operator is designed to operate sash sizes from 24" to 40" wide, up to 84" high and weighing up to 108 lbs.
Handle and cover sold separately.
Left Hand Operator: 36-467EN…
Truth Encore split arm casement window operator, Left Hand. Reverse Dyad operator. Sill mounted window crank operator. Maxim series operator replacement.
The Encore family of operators are engineered to incorporate all the strengths and performance characteristics as Truth's Maxim® Series
The Encore series Reverse Dyad operator is designed for narrow windows and will operate sash sizes from 16" to 32" wide, up to 72" high and weighing up to 55 lbs.
Handle and cover sold separately.
Right Hand Operator: 36-471EN…
Truth Encore split arm casement window operator, Right Hand. Reverse Dyad operator. Sill mounted window crank operator. Maxim series operator replacement.
The Encore family of operators are engineered to incorporate all the strengths and performance characteristics as Truth's Maxim® Series
The Encore series Reverse Dyad operator is designed for narrow windows and will operate sash sizes from 16" to 32" wide, up to 72" high and weighing up to 55 lbs.
Handle and cover sold separately.
Left Hand Operator: 36-470EN…
Truth manual skylight operator Hook drive. Color: Mill. Fits Truth angle drive skylight operators.…
Truth Signature Series sliding door handle set. Color: Black. Active handle set with interior thumbturn only. No exterior key lock. Truth 40.94 sliding door handle. For 1-1/4" to 2-1/4" thick doors. ***Special order, non-returnable. Allow 3 to 4 weeks to ship. Minimum order of 3 required.…
Truth Signature Series sliding door handle set. Color: Brushed Satin Nickel. Active handle set with interior thumbturn only. No exterior key lock. Truth 40.94 sliding door handle. For 1-1/4" to 2-1/4" thick doors.…
Truth Signature Series sliding door handle set. Color: White. Active handle set with interior thumbturn only. No exterior key lock. Truth 40.94 sliding door handle. For 1-1/4" to 2-1/4" thick doors. Truth handle 40.94.10.100.1.…
Truth Signature Series sliding door handle set. Color: Faux Bronze. Active handle set with interior thumbturn only. No exterior key lock. Truth 40.94 sliding door handle. For 1-1/4" to 2-1/4" thick doors. ***Special order,non-returnable. Allow 1 to 2 weeks to ship.…
Truth Signature Series sliding door handle set. Color: Black. Dummy handle set. No interior thumbturn or key lock. Truth 40.94 sliding door handle. For 1-1/4" to 2-1/4" thick doors. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
Truth Signature Series sliding door handle set with exterior key lock. Color: Black. Active door handle set. Truth 40.94 sliding door handle. For 1-1/4" to 2-1/4" thick doors. ***Special order, non-returnable. Allow 2 weeks to ship.…
Truth Signature series sliding door handle set. Color White. Active handle set with interior thumbturn and exterior key lock. For 1.25" to 2.25" thick doors. Patent number 40.94.10.100.1.…
Truth sliding patio door handle set with 3-15/16" hole centers. Color: White. Active handle set with interior thumbturn. Non-keyed handle.
Lever can be used in Offset or Center position.
Handle Length: 8"
Handle Trim Width: 1"
Handle Screw Hole Distance: 3-15/16"…
Truth Hardware support plate.…
Truth window operator T handle. 11-32" Spline. Color: Gold(old). Fits all Truth operators with 11-32" spline. ***Once stock is depleted, item will be discontinued.…
Truth window crank operator T-handle with 11/32" spline size. Color: Bronze. Used on Truth Hardware casement and awning window operators.…
Truth window crank operator T-handle with 11/32" spline size. Color: Brushed Copper Nickel. Used on Truth Hardware casement and awning window operators.…
Truth window crank operator T-handle with 11/32" spline size. Color: Chestnut Bronze. Used on Truth Hardware casement and awning window operators.…
Truth window operator T-handle. Color: Satin Nickel. Only fits Truth 11/32 inch spline. Used on Truth hardware casement and awning window operators.…
Truth Hardware 31761A sliding door roller assembly with 1-1/4" steel wheels. Steel housing. US PAT 4,194,266 Can Pat 1,126,579. If your mounting tabs are extended, use 9-355.…
Truth stainless steel sliding patio door roller assembly with 1-7/16" stainless steel wheels. Stainless Steel housing. 5-47/64" Mounting Hole Centers.…
Truth Hardware sliding door roller assembly with 1-1/4" nylon wheels. Steel housing. US PAT 4,194,266 Can Pat 1,126,579.…
Truth Hardware stainless steel sliding door roller assembly with 1-1/4" stainless steel wheels. Truth roller 31895A. US PAT 4,194,266 Can Pat 1,126,579.…
Amesbury Truth tandem sliding glass patio door roller assembly with 1-11/16" nylon wheels. 11/16" width Aluminum housing, with stainless steel inner. PDR 95T.…