Miller Screen Door Keeper 1951P
Miller sliding screen door keeper. Length: 2-1/2". Width: 1/4". PSL 210.......see more
Miller sliding screen door keeper. Length: 2-1/2". Width: 1/4". PSL 210.…
Millton 2 Point Lockset 55-100SCHX
Interlock Milton swing door handle set. Satin Chrome Inside and Outside Finish. Includes interior an......see more
Interlock Milton swing door handle set. Satin Chrome Inside and Outside Finish. Includes interior and exterior backplates with levers. Handle to Cylinder Hole: 85mm(3.328"). Key cylinder sold separately. Handle DL01-6105-0SC.
Includes:
Interior and Exterior Levers and Backplates.
Assortment of Mounting Screws. (Screw Lengths Included: 1-15/16", 2-3/8" & 2-9/16").
Includes 3-5/8" Long Spindle and 4-1/16" Long Spindle.
Features:
Stylish Verona handle.
Uses C4 keyway (standard 5-pin).
Concealed fixing on external escutcheon plate.
Mortise lock not included. Mortise lock 56-169.
***Not always in stock. non-returnable. May take 2 to 3 weeks for shipping.…
Millton 2 Point Lockset 55-100WX
Interlock Milton swing door handle set. White Inside and Outside Finish. Includes interior and exter......see more
Interlock Milton swing door handle set. White Inside and Outside Finish. Includes interior and exterior backplates with levers. Key cylinder sold separately. Features: Standard 2-Point. Stylish Verona handle. Uses C4 keyway (standard 5-pin). Concealed fixing on external escutcheon plate. Mortise lock not included. Mortise lock 56-169. ***Not always in stock. non-returnable. May take 2 to 3 weeks for shipping.…
Mini Vent Lock 50-1453B
The Mini ventlock is for use on Vinyl, Aluminum and Fiberglass double and single hung sash windows. ......see more
The Mini ventlock is for use on Vinyl, Aluminum and Fiberglass double and single hung sash windows. Color: Black. 1.99" Overall Height.
The units are single action, so fitting two ensures compliance with ASTM F2090 - 2008 and 2010.
The Mini Angel is fitted into the stiles of the top sash, one on each side.
The units are single action, so fitting two ensures compliance with ASTM F2090 - 2008 and 2010.
The unit is primarily factory-fitted as access to the sash is required. However, provided the sashes can be removed easily, the Mini Angel is also suitable for use where the sashes have already been installed.
The unit is clipped into a slot in the face of the top sash. The units are therefore tamper-proof.
Markings PCT/GB09/1526.…
Mini Vent Lock 50-1453TN
The Mini ventlock is for use on Vinyl, Aluminum and Fiberglass double and single hung sash windows. ......see more
The Mini ventlock is for use on Vinyl, Aluminum and Fiberglass double and single hung sash windows. Color: Tan. 1.99" Overall Height.
The units are single action, so fitting two ensures compliance with ASTM F2090 - 2008 and 2010.
The Mini Angel is fitted into the stiles of the top sash, one on each side.
The units are single action, so fitting two ensures compliance with ASTM F2090 - 2008 and 2010.
The unit is primarily factory-fitted as access to the sash is required. However, provided the sashes can be removed easily, the Mini Angel is also suitable for use where the sashes have already been installed.
The unit is clipped into a slot in the face of the top sash. The units are therefore tamper-proof.
***Image shown is white and is for reference only. This part number is Tan.…
Mini Vent Lock 50-1453W
The Mini ventlock is for use on Vinyl, Aluminum and Fiberglass double and single hung sash windows. ......see more
The Mini ventlock is for use on Vinyl, Aluminum and Fiberglass double and single hung sash windows. Color: White. 1.99" Overall Height.
The units are single action, so fitting two ensures compliance with ASTM F2090 - 2008 and 2010.
The Mini Angel is fitted into the stiles of the top sash, one on each side.
The units are single action, so fitting two ensures compliance with ASTM F2090 - 2008 and 2010.
The unit is primarily factory-fitted as access to the sash is required. However, provided the sashes can be removed easily, the Mini Angel is also suitable for use where the sashes have already been installed.
The unit is clipped into a slot in the face of the top sash. The units are therefore tamper-proof.…
Mirror Roller Assembly 9-241LH*RH
Left and Right Hand set. Mirror closet door roller assembly.......see more
Left and Right Hand set. Mirror closet door roller assembly.…
Monorail Track 45-96
Monorail Track 45-96. *****Effective 9-1-2018, 45-96 will be sold as is only. There are minor cracks......see more
Monorail Track 45-96. *****Effective 9-1-2018, 45-96 will be sold as is only. There are minor cracks in some of these. This does not effect performance and due to very old tooling/cost the die can not be repaired. Non-returnable.…
Mortise 2 Point Lock 16-452
Amesbury Gemini 2 point sliding door mortise lock with faceplate. Patent 6.0264.252 and or Pate......see more
Amesbury Gemini 2 point sliding door mortise lock with faceplate. Patent 6.0264.252 and or Patent 5.820.170. Faceplate 3/4" X 11-3/4". Steel. Used by Sash Control, Marvin, Weather Shield, PGT and many other door manufacturers. Special Features: Amesbury's patented Gemini Lock is the ultimate in security. Each hook is individually adjustable, enabling the installer to secure the lock properly in all situations. It incorporates a pin to prevent hook engagement unless the door is closed. Other Information: Pull Force = 2,000 lbs. Cycle Rating = 50,000…
Mortise 2 Point Lock 16-452ss
Amesbury Gemini stainless steel 2 point mortise lock with Faceplate. Patent 6.0264.252 and or P......see more
Amesbury Gemini stainless steel 2 point mortise lock with Faceplate. Patent 6.0264.252 and or Patent 5.820.170. Faceplate 3/4" X 11-3/4". Special Features: Amesbury's patented Gemini Lock is the ultimate in security. Each hook is individually adjustable, enabling the installer to secure the lock properly in all situations. It incorporates a pin to prevent hook engagement unless the door is closed. Other Information: Pull Force = 2,000 lbs. Cycle Rating = 50,000…
Mortise 2 Point Lock 16-453
2 point mortise lock with short faceplate. Hooks point away from center.
***Part discontinued......see more
2 point mortise lock with short faceplate. Hooks point away from center.
***Part discontinued. Replacement part is 16-720. Must also purchase keeper 16-680FK or 900-22553***…
Mortise 2 Point Lock 16-574
Item discontinued, use 16-574ss. Dual Hook mortise lock for sliding doors with center latch. Patent ......see more
Item discontinued, use 16-574ss. Dual Hook mortise lock for sliding doors with center latch. Patent No. US 7,040,671 B2. Steel lock. Manufactured by Amesbury. Used with center latch sliding door handles. ***Item discontinued, use stainless steel version 16-574ss.…
Mortise 2 Point Lock 16-574ss
Dual Hook mortise lock for sliding doors with center latch. Patent No. US 7,040,671 B2. Stainless St......see more
Dual Hook mortise lock for sliding doors with center latch. Patent No. US 7,040,671 B2. Stainless Steel lock. Manufactured by Amesbury. Used with center latch sliding door handles. ***Once stock is depleted, item will be discontinued.…
Mortise 2 Point Lock 16-611
Truth Gemini sliding door mortise lock with recessed faceplate. Steel. 12" Hole centers. Two po......see more
Truth Gemini sliding door mortise lock with recessed faceplate. Steel. 12" Hole centers. Two point mortise lock with 1/2" recessed trim plate. 2447 Series Multipoint
Special Features:
Amesburys patented Gemini Lock is the ultimate in security. Each hook is individually adjustable, enabling the installer to secure the lock properly in all situations. It incorporates a pin to prevent hook engagement unless the door is closed. Other Information: Pull Force = 2,000 lbs. Cycle Rating = 50,000…
Mortise 2 Point Lock 16-612
Two Point Sliding Door Mortise Lock With Recessed Trim Plate. 2447 Series Multipoint. 7/16" Rec......see more
Two Point Sliding Door Mortise Lock With Recessed Trim Plate. 2447 Series Multipoint. 7/16" Recessed Faceplate. PAT #6,264,252 and #5,820,170.
Special Features:
Amesburys patented Gemini Lock is the ultimate in security. Each hook is individually adjustable, enabling the installer to secure the lock properly in all situations. It incorporates a pin to prevent hook engagement unless the door is closed. Other Information: Pull Force = 2,000 lbs. Cycle Rating = 50,000…
Mortise 2 Point Lock 16-612ss
Stainless Steel Two Point Mortise Lock With Trim Plate 2447 Series Multipoint
Special Features:
......see more
Stainless Steel Two Point Mortise Lock With Trim Plate 2447 Series Multipoint Special Features: Amesburys patented Gemini Lock is the ultimate in security. Each hook is individually adjustable, enabling the installer to secure the lock properly in all situations. It incorporates a pin to prevent hook engagement unless the door is closed. Other Information: Pull Force = 2,000 lbs. Cycle Rating = 50,000 ***Not always in stock, may take 3 to 4 wees to ship.…
Mortise 2 Point Lock 16-680
Sliding door mortise lock with double latch and safety lock out pin without faceplate. Patent number......see more
Sliding door mortise lock with double latch and safety lock out pin without faceplate. Patent number 6.264.252 stamped on body. Gemini I & II sliding door mortise lock. Steel. No Trimplate included Special Features: Amesbury's patented Gemini Lock is the ultimate in security. Each hook is individually adjustable, enabling the installer to secure the lock properly in all situations. It incorporates a pin to prevent hook engagement unless the door is closed. Other Information: Pull Force = 2,000 lbs. Cycle Rating = 50,000…
Mortise 2 Point Lock 16-720
Truth sliding patio door mortise lock with short faceplate. Two point mortise lock replacement. Hook......see more
Truth sliding patio door mortise lock with short faceplate. Two point mortise lock replacement. Hooks point inward.
Features
- Has Anti-Slam pin.
- Withstands up to 2000 lbs of forced entry.
- Actuator is centered for 3 hole machining or 3/4 inch Offset for 4 hole machining.
- Separate in and out hook adjustments for accurate door alignment.…
Mortise 2 Point Lock 16-800
Windoor Stainless steel mortise lock with double latch. Uses square drive for tail piece. Stamped US......see more
Windoor Stainless steel mortise lock with double latch. Uses square drive for tail piece. Stamped US Patent No. 8,931,812 B1 and US 10,053,897 B1.…
Mortise 2 Point Lock 16-883
Dual 2 point mortise lock with faceplate for sliding glass patio doors. Steel. 11" Mounting Scr......see more
Dual 2 point mortise lock with faceplate for sliding glass patio doors. Steel. 11" Mounting Screws. Faceplate 3/4" X 11-3/4"…
Mortise 2 Point Lock 16-883ss
Stainless Steel 2 point mortise lock with faceplate for sliding glass patio doors. 11" Mounting......see more
Stainless Steel 2 point mortise lock with faceplate for sliding glass patio doors. 11" Mounting Screws. Faceplate 3/4" X 11-3/4". ***Non-returnable.…
Mortise Door Lock 854-16692
GU Ferco 50/92 single point mortise lock. G-U Lock: 6-C4893-50-0-8. Door lock with 50mm backset......see more
GU Ferco 50/92 single point mortise lock. G-U Lock: 6-C4893-50-0-8. Door lock with 50mm backset.
Additional information:
Heavy duty mortise construction with reinforced lever return spring system.
Locking by US-cylinder with 90° turn of key or thumb-turn to engage the 1" (25mm) deadbolt.
Non-handed, latch easily reversible.
8mm square spindle. 92mm centres (spindle to cylinder).
16mm stainless steel faceplate with radius ends for easy installation and cleaner look.
Ideal for exterior and interior door applications.
To be used with lever handle set (US-cylinder above handle).
***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
Mortise Flush Bolt 19-426
Mortise flush bolt with with 10" flush bolt rod. 1/8" Offset. Aluminum finish.
Mortise ......see more
Mortise flush bolt with with 10" flush bolt rod. 1/8" Offset. Aluminum finish.
Mortise flush bolt for use on all commercial storefront doors and architectural aluminum and glass narrow stile doors. Made for easy installation, replaces most brands of Storefront flush bolt.
Specifications:
• Spring loaded lever action.
• Rod extension- 7/8" throw.
• Backset 3/4". • 5/8" adjustment on rod length
• Face plate dimensions 15/16" x 4-1/2" with 5/32" radius corner.
• Square 1/2" nylon tip with beveled corners to prevent binding.
• Supplied with nylon keeper and fasteners.…
Mortise Flush Bolt 19-426BZ
Mortise flush bolt with with 10" flush bolt rod. 1/8" Offset. Bronze finish.
Mortise fl......see more
Mortise flush bolt with with 10" flush bolt rod. 1/8" Offset. Bronze finish.
Mortise flush bolt for use on all commercial storefront doors and architectural aluminum and glass narrow stile doors. Made for easy installation, replaces most brands of Storefront flush bolt.
Specifications:
• Spring loaded lever action.
• Rod extension- 7/8" throw.
• Backset 3/4". • 5/8" adjustment on rod length
• Face plate dimensions 15/16" x 4-1/2" with 5/32" radius corner.
• Square 1/2" nylon tip with beveled corners to prevent binding.
• Supplied with nylon keeper and fasteners.…
Mortise Flush Bolt 19-427
Mortise flush bolt with 10" flush bolt rod. 1/4" Offset. Aluminum finish.
Mortise flush......see more
Mortise flush bolt with 10" flush bolt rod. 1/4" Offset. Aluminum finish.
Mortise flush bolt for use on all commercial storefront doors and architectural aluminum and glass narrow stile doors. Made for easy installation, replaces most brands of Storefront flush bolt.
Specifications:
• Spring loaded lever action.
• Rod extension- 7/8" throw.
• Backset 3/4". • 5/8" adjustment on rod length
• Face plate dimensions 15/16" x 4-1/2" with 5/32" radius corner.
• Square 1/2" nylon tip with beveled corners to prevent binding.
• Supplied with nylon keeper and fasteners.…
Mortise Flush Bolt 19-427BZ
Mortise flush bolt with 10" flush bolt rod. 1/4" Offset. Bronze finish.
Mortise flush b......see more
Mortise flush bolt with 10" flush bolt rod. 1/4" Offset. Bronze finish.
Mortise flush bolt for use on all commercial storefront doors and architectural aluminum and glass narrow stile doors. Made for easy installation, replaces most brands of Storefront flush bolt.
Specifications:
• Spring loaded lever action.
• Rod extension- 7/8" throw.
• Backset 3/4". • 5/8" adjustment on rod length
• Face plate dimensions 15/16" x 4-1/2" with 5/32" radius corner.
• Square 1/2" nylon tip with beveled corners to prevent binding.
• Supplied with nylon keeper and fasteners.…
Mortise Flush Bolt 19-569
Mortise flush bolt with 14" flush bolt rod. 1/8" Offset. Aluminum finish. Lever lock flush......see more
Mortise flush bolt with 14" flush bolt rod. 1/8" Offset. Aluminum finish. Lever lock flush bolt.
Mortise flush bolt for use on all commercial storefront doors and architectural aluminum and glass narrow stile doors. Made for easy installation, replaces most brands of Storefront flush bolt.
Specifications:
• Spring loaded lever action.
• Rod extension- 7/8" throw.
• Backset 3/4". • 5/8" adjustment on rod length
• Face plate dimensions 15/16" x 4-1/2" with 5/32" radius corner.
• Square 1/2" nylon tip with beveled corners to prevent binding.
• Supplied with nylon keeper and fasteners.…
Mortise Flush Bolt 19-569BZ
Mortise flush bolt with 14" flush bolt rod. 1/8" Offset. Bronze finish. Lever lock flush b......see more
Mortise flush bolt with 14" flush bolt rod. 1/8" Offset. Bronze finish. Lever lock flush bolt.
Mortise flush bolt for use on all commercial storefront doors and architectural aluminum and glass narrow stile doors. Made for easy installation, replaces most brands of Storefront flush bolt.
Specifications:
• Spring loaded lever action.
• Rod extension- 7/8" throw.
• Backset 3/4". • 5/8" adjustment on rod length
• Face plate dimensions 15/16" x 4-1/2" with 5/32" radius corner.
• Square 1/2" nylon tip with beveled corners to prevent binding.
• Supplied with nylon keeper and fasteners.…
Mortise Lock 16-142
Used for surface mounted patio door handle......see more
Used for surface mounted patio door handle…
Mortise Lock 16-170
Square face Mortise lock 45 degree......see more
Square face Mortise lock 45 degree…
Mortise Lock 16-170-90
Square face Mortise lock 90 degree thumb turn style.......see more
Square face Mortise lock 90 degree thumb turn style.…
Mortise Lock 16-171
Sliding door mortise lock with Round face. Steel. 45 degree thumb turn. 3-11-16" Mounting Holes......see more
Sliding door mortise lock with Round face. Steel. 45 degree thumb turn. 3-11-16" Mounting Holes. Used on Adams Rite sliding doors and others.…
Mortise Lock 16-173
Square face Mortise lock 90 degree......see more
Square face Mortise lock 90 degree…
Mortise Lock 16-174
Round face sliding patio door mortise lock with 90 degree cam. Steel. 3-11/16" mounting hole ce......see more
Round face sliding patio door mortise lock with 90 degree cam. Steel. 3-11/16" mounting hole centers. **If you have a 45 degree cam, use 16-175.…
Mortise Lock 16-175
Round face sliding door mortise lock with 3-11/16" hole centers. Steel. 45 degree cam. Our......see more
Round face sliding door mortise lock with 3-11/16" hole centers. Steel. 45 degree cam. Our most common single point mortise lock. Used on Amesbury door handles, Sash Controls, PGT, Silverline and many others. 32461 Mortise lock. We recommend the Stainless steel for this mortise lock. Model # 16-397SS FYI: If you need the 2 small attaching screws, please order part 16-363-45 instead. …
Mortise Lock 16-175SS
Stainless steel sliding patio door mortise lock with 3-11/16" mounting hole centers. Round face......see more
Stainless steel sliding patio door mortise lock with 3-11/16" mounting hole centers. Round face mortise lock with 45 degree latch hole. Stainless steel. Our most common single point mortise lock. Used on Amesbury door handles, Sash Controls, PGT, Silverline and many others.…
Mortise Lock 16-333
Peachtree sliding door mortise lock with 5-3/8" hole centers. Steel lock. Mortise look used by ......see more
Peachtree sliding door mortise lock with 5-3/8" hole centers. Steel lock. Mortise look used by Peachtree and others.
This mortise lock plate has 5-3/8" Hole centers. CHECK YOURS FOR PROPER FIT.
If your mortise lock has 4-5/8" mounting hole centers, use 16-363-45.…
Mortise Lock 16-363-45
Sliding door mortise lock with faceplate and 16-175 mortise lock. 4-5/8" Mounting Hole Centers.......see more
Sliding door mortise lock with faceplate and 16-175 mortise lock. 4-5/8" Mounting Hole Centers. Brass plated lock. Round face mortise lock with 45 degree latch hole. Our most common mortise lock. Used on Amesbury door handles, Sash Controls, PGT, Silverline and many others. Check hole measurements on faceplate.…
Mortise Lock 16-363-45ss
Stainless steel sliding door mortise lock with faceplate. 4-5/8" Mounting Hole Centers. Stainle......see more
Stainless steel sliding door mortise lock with faceplate. 4-5/8" Mounting Hole Centers. Stainless Steel lock. Round face mortise lock with 45 degree latch hole. Our most common mortise lock. Used on Amesbury door handles, Sash Controls, PGT, Silverline and many others. Check hole measurements on faceplate.…
- 0 items