G-U Automatic Secury Key Operated Multipoint Lock 854-16880
G-U Secury European Automatic Key Operated Multipoint Door Lock w/ 1.77" Backset with ......see more
G-U Secury European Automatic Key Operated Multipoint Door Lock w/ 1.77" Backset with Latch Bolts. With Round Faceplate Edges. 6' 8" Door.
One-piece Secury European profile cylinder automatic door lock for a 6' 8" tall door. The automatic door lock works by simply closing the door and the latchbolts instantly throw 20mm and are secured to prevent them being forced back. By turning the key from the outside or the knob from the inside, it will engage the central deadbolt and lock the top and bottom latches to become a 3 deadbolt locking system.
Made for an 6' 8" door. Faceplate has round edges. Stainless steel faceplate finish. G-U Secury 6-40526-03-R-8B.
Overall Length: 1590mm (62.68").
Bottom Latchbolt Position: 597mm (23.5")
Upper Latchbolt Position: 743mm (29.25")
Handle Height: 1050mm (41.34") Croppable
***Lock uses European profile cylinder.
Additional information:
3-point, one piece locking system for 6' 8'' doors.
Heavy duty mortise construction with reinforced lever return spring system.
Locking by European cylinder with 180° turn of key or thumb-turn.
No lifting of handle to engage locking points.
Top and bottom Automatic latchbolts projection from 10 to 20mm: - provide security against forced entry - help prevent air infiltration from gasket - protect the door panel from warping.
3/4'' throw on deadbolt.
Non handed, latch easily reversible.
8mm square spindle. 92mm centres (spindle to cylinder).
16mm stainless steel faceplate with radius ends for easy installation and cleaner look.
Same hardware groove detail throughout our entire door lock program (jig, router base and bits available).
Extension with additional lock point is available for doors taller than 8' (6-33479-04-0-8B).
Top and bottom Automatic latchbolt projection from 10 to 20mm.
***Special order, non-returnable. Allow around 3 to 4 weeks to ship.
If you need help locating the correct lock for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
G-U Automatic Secury Key Operated Multipoint Lock 854-16887
G-U Secury European Automatic Key Operated Multipoint Door Lock w/ 2.55" (65mm) Backset wi......see more
G-U Secury European Automatic Key Operated Multipoint Door Lock w/ 2.55" (65mm) Backset with Latch Bolts. With Round Faceplate Edges. 6' 8" Door.
One-piece Secury European profile cylinder automatic door lock for a 6' 8" tall door. The automatic door lock works by simply closing the door and the latchbolts instantly throw 20mm and are secured to prevent them being forced back. By turning the key from the outside or the knob from the inside, it will engage the central deadbolt and lock the top and bottom latches to become a 3 deadbolt locking system.
Made for an 6' 8" door. Faceplate has round edges. Stainless steel faceplate finish. G-U Secury 6-40526-07-R-8B.
Overall Length: 1590mm (62.68").
Bottom Latchbolt Position: 597mm (23.5")
Upper Latchbolt Position: 743mm (29.25")
Handle Height: 1050mm (41.34") Croppable
***Lock uses European profile cylinder.
Additional information:
3-point, one piece locking system for 6' 8'' doors.
Heavy duty mortise construction with reinforced lever return spring system.
Locking by European cylinder with 180° turn of key or thumb-turn.
No lifting of handle to engage locking points.
Top and bottom Automatic latchbolts projection from 10 to 20mm: - provide security against forced entry - help prevent air infi ltration from gasket - protect the door panel from warping.
3/4'' throw on deadbolt.
Non handed, latch easily reversible.
8mm square spindle. 92mm centres (spindle to cylinder).
16mm stainless steel faceplate with radius ends for easy installation and cleaner look.
Same hardware groove detail throughout our entire door lock program (jig, router base and bits available).
Extension with additional lock point is available for doors taller than 8' (6-33479-04-0-8B).
Top and bottom Automatic latchbolt projection from 10 to 20mm.
***Special order, non-returnable. Allow around 3 to 4 weeks to ship.
If you need help locating the correct lock for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
G-U Automatic Secury Key Operated Multipoint Lock 854-16924
G-U Secury European Automatic Key Operated Multipoint Door Lock w/ 2.55" (65mm) Backset wi......see more
G-U Secury European Automatic Key Operated Multipoint Door Lock w/ 2.55" (65mm) Backset with Latch Bolts. With Round Faceplate Edges. 8' Door.
One-piece Secury European profile cylinder automatic door lock for a 8' tall door. The automatic door lock works by simply closing the door and the latchbolts instantly throw 20mm and are secured to prevent them being forced back. By turning the key from the outside or the knob from the inside, it will engage the central deadbolt and lock the top and bottom latches to become a 3 deadbolt locking system.
Made for an 8' door. Faceplate has round edges. Stainless steel faceplate finish. G-U Secury 6-40526-08-R-8B.
Overall Length: 1900mm (74.8").
Bottom Latchbolt Position: 597mm (23.5")
Upper Latchbolt Position: 1052mm (41.44")
Handle Height: 1050mm (41.34") Croppable
***Lock uses European profile cylinder.
Additional information:
3-point, one piece locking system for 8' tall doors.
Heavy duty mortise construction with reinforced lever return spring system.
Locking by European cylinder with 180° turn of key or thumb-turn.
No lifting of handle to engage locking points.
Top and bottom Automatic latchbolts projection from 10 to 20mm: - provide security against forced entry - help prevent air infiltration from gasket - protect the door panel from warping.
3/4'' throw on deadbolt.
Non handed, latch easily reversible.
8mm square spindle. 92mm centres (spindle to cylinder).
16mm stainless steel faceplate with radius ends for easy installation and cleaner look.
Same hardware groove detail throughout our entire door lock program (jig, router base and bits available).
Extension with additional lock point is available for doors taller than 8' (6-33479-04-0-8B).
Top and bottom Automatic latchbolt projection from 10 to 20mm.
***Special order, non-returnable. Allow around 3 to 4 weeks to ship.
If you need help locating the correct lock for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
G-U Automatic Secury Key Operated Multipoint Lock 854-16970
G-U Secury European Automatic Key Operated Multipoint Door Lock w/ 1.77" Backset with ......see more
G-U Secury European Automatic Key Operated Multipoint Door Lock w/ 1.77" Backset with Latch Bolts. With Round Faceplate Edges. 8' Door.
One-piece Secury European profile cylinder automatic door lock for a 8' tall door. The automatic door lock works by simply closing the door and the latchbolts instantly throw 20mm and are secured to prevent them being forced back. By turning the key from the outside or the knob from the inside, it will engage the central deadbolt and lock the top and bottom latches to become a 3 deadbolt locking system.
Made for an 8' door. Faceplate has round edges. Stainless steel faceplate finish. G-U Secury 6-40526-04-R-8B.
Overall Length: 1900mm (74.8").
Bottom Latchbolt Position: 597mm (23.5")
Upper Latchbolt Position: 1052mm (41.44")
Handle Height: 1050mm (41.34") Croppable
***Lock uses European profile cylinder.
Additional information:
3-point, one piece locking system for 8' tall doors.
Heavy duty mortise construction with reinforced lever return spring system.
Locking by European cylinder with 180° turn of key or thumb-turn.
No lifting of handle to engage locking points.
Top and bottom Automatic latchbolts projection from 10 to 20mm: - provide security against forced entry - help prevent air infiltration from gasket - protect the door panel from warping.
3/4'' throw on deadbolt.
Non handed, latch easily reversible.
8mm square spindle. 92mm centres (spindle to cylinder).
16mm stainless steel faceplate with radius ends for easy installation and cleaner look.
Same hardware groove detail throughout our entire door lock program (jig, router base and bits available).
Extension with additional lock point is available for doors taller than 8' (6-33479-04-0-8B).
Top and bottom Automatic latchbolt projection from 10 to 20mm.
***Special order, non-returnable. Allow around 3 to 4 weeks to ship.
If you need help locating the correct lock for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
G-U Automatic Secury Key Operated Multipoint Lock 854-17118
G-U Secury European Automatic Key Operated Multipoint Door Lock w/ 2.16" (55mm) Backset wi......see more
G-U Secury European Automatic Key Operated Multipoint Door Lock w/ 2.16" (55mm) Backset with Latch Bolts. With Round Faceplate Edges. 6' 8" Door.
One-piece Secury European profile cylinder automatic door lock for a 6' 8" tall door. The automatic door lock works by simply closing the door and the latchbolts instantly throw 20mm and are secured to prevent them being forced back. By turning the key from the outside or the knob from the inside, it will engage the central deadbolt and lock the top and bottom latches to become a 3 deadbolt locking system.
Made for an 6' 8" door. Faceplate has round edges. Stainless steel faceplate finish. G-U Secury 6-40526-05-R-8B.
Overall Length: 1590mm (62.68").
Bottom Latchbolt Position: 597mm (23.5")
Upper Latchbolt Position: 743mm (29.25")
Handle Height: 1050mm (41.34") Croppable
***Lock uses European profile cylinder.
Additional information:
3-point, one piece locking system for 6' 8'' doors.
Heavy duty mortise construction with reinforced lever return spring system.
Locking by European cylinder with 180° turn of key or thumb-turn.
No lifting of handle to engage locking points.
Top and bottom Automatic latchbolts projection from 10 to 20mm: - provide security against forced entry - help prevent air infi ltration from gasket - protect the door panel from warping.
3/4'' throw on deadbolt.
Non handed, latch easily reversible.
8mm square spindle. 92mm centres (spindle to cylinder).
16mm stainless steel faceplate with radius ends for easy installation and cleaner look.
Same hardware groove detail throughout our entire door lock program (jig, router base and bits available).
Extension with additional lock point is available for doors taller than 8' (6-33479-04-0-8B).
Top and bottom Automatic latchbolt projection from 10 to 20mm.
***Special order, non-returnable. Allow around 3 to 4 weeks to ship.
If you need help locating the correct lock for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
G-U Berkeley Series Gripset Handle Black 854-16668
GU multipoint door lock Gripset handle for entry doors 1-3/4" thick. Color: Black. Active handl......see more
GU multipoint door lock Gripset handle for entry doors 1-3/4" thick. Color: Black. Active handle. This handle only be used with Secury automatic multipoint locks for gripset handles. K-C2070-00-0-6
Can be used on 2-1/4" thick doors with use of 854-16935 conversion kit.
Info:
Solid forged brass.
US-cylinder with standard Schlage “C” keyway.
90° locking with thumb-turn.
Non-handed.
Easy to install.
Weather proof gasket.
Stainless steel set screw on interior lever to secure handle.
Easily converts to inactive handle, using dummy conversion kit K-C2056-00-0-6. Please contact us for availability.
For 1-3/4" thick doors.
***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
G-U Casement Window Gear Cover 854-16171
G-U casement window operator gear cover only 9-C0617-00-0-1. Used on push-out casement windows.
Len......see more
G-U casement window operator gear cover only 9-C0617-00-0-1. Used on push-out casement windows.
Length: 5-11/16". Width: 5/8".
***Special order, non-returnable. Allow 1 to 2 weeks to ship.…
G-U Casement Window Operator Gear 854-15754
G-U casement window gear with 22mm backset 6-C0617-22-0-1. Used on push-out casement windows. Gear o......see more
G-U casement window gear with 22mm backset 6-C0617-22-0-1. Used on push-out casement windows. Gear only. Extensions and lock gear cover sold separately. ***Special order, non-returnable. Allow 1 to 2 weeks to ship.…
G-U Dirigent Handle Screw 854-12704
G-U Dirigent handle installation screw for inside/ outside operation. For sash thickness 60-64mm.&nb......see more
G-U Dirigent handle installation screw for inside/ outside operation. For sash thickness 60-64mm. Countersunk screw M5. Used with tilt and turn dirigent handles. 9-13255-70-0-1. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
G-U Dust Cup 854-15515
G-U Plastic Dust Cup. 25mm Depth. Color: Black. Use for latch and 2 automatic latches (optional).&nb......see more
G-U Plastic Dust Cup. 25mm Depth. Color: Black. Use for latch and 2 automatic latches (optional). 9-C4765-00-0-6
Dimensions:
Length: 62mm
Width: 19.5mm
Depth: 25.8mm…
G-U Euro Profile Cylinder Square Rosette Black 854-16930
G-U / Ferco Euro Rosettes for Profile cylinder. Color: Black. Fastening kit included for 1-3/4'&......see more
G-U / Ferco Euro Rosettes for Profile cylinder. Color: Black. Fastening kit included for 1-3/4'' and 2-1/4'' thick doors. K-C9077-00-0-6.
Compatible with Tedee smart lock
***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
G-U Europa R4 Active Door Lock 854-16296
GU Secury Europa R4 Multipoint Door Lock 1.57" (40/92) Backset with 4 Rollers
The ......see more
GU Secury Europa R4 Multipoint Door Lock 1.57" (40/92) Backset with 4 Rollers
The Secury Europa R4 multipoint door lock system, with its 5-point locking system features 4 adjustable rolling pins, deadbolt, and latch, combines function and design flexibility for any application. Also featured is our 90 degree locking mechanism that incorporates a standard US cylinder offering a Schlage "C" keyway system. The GU Europa R4 5 point door lock works by simply lifting the handle.
European version, key BELOW the handle.
Made for an 6' 8" door and can be trimmed. Roller positions measured from the center of the handle. Installation Screws 854-11101 (sold separately).
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt. (See diagram)
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
***Special order, non-returnable. Allow 4 to 6 weeks to ship.
GU
Number
Description
Backset
Deadbolt
Throw
Handle
Height
Bottom Roller
Position 1
Bottom Roller
Position 2
Top Roller
Position 1
Top Roller
Position 2
Faceplate
Finish
854-16296
40/92 8-16 US FG/
GU Part #: 6-C4983-40-0-1
40mm
(1.57)
25.4mm
(1.00)
35"
390.5mm
(15.37)
279.5
(33.88)
279.5mm
(11.00)
749.5mm
(29.51)
Silver
…
G-U Ferco Flip Lock Flush Bolt 854-16725
G-U Ferco Flip lock mortised flush bolt with conical shootbolt. Color: Polished brass. GU 6-C4305-16......see more
G-U Ferco Flip lock mortised flush bolt with conical shootbolt. Color: Polished brass. GU 6-C4305-16-0-3. Used on inactive door panels. Markings: OTLAV. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
G-U French Casement Window Roller Strike 854-16170
G-U French casement window strike 9-C0115-01-0-8B. Stainless Steel. Used on G-U push-out French case......see more
G-U French casement window strike 9-C0115-01-0-8B. Stainless Steel. Used on G-U push-out French casement windows with roller cams. Non-handed. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
G-U Gripset Handle Conversion Kit 854-16935
GU Actuator conversion kit to use Gripset handles on 2-1/4" thick doors. Non-handed. K-C2054-57......see more
GU Actuator conversion kit to use Gripset handles on 2-1/4" thick doors. Non-handed. K-C2054-57-0-6.
Includes all necessary accessories.
***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
G-U Handle Bushing Kit 854-9064506
G-U swing door handle bushing snap ring kit. For standard and low profile handles.
Includes:
1 x......see more
G-U swing door handle bushing snap ring kit. For standard and low profile handles.
Includes:
1 x standard profile plastic holder (snap ring) - 9-C0645-02-0-6
1 x low profile plastic holder (snap ring) - 9-C0645-03-0-6
1 x metric "o" ring - 9-C0953-00-0-6
1 x nylatron washer, 0.25mm x 16mm - 9-C0647-25-0-0
1 x nylatron washer, 0.5 x 16mm - 9-C0647-50-0-0
1 x nylatron washer, 1.0mm x 16mm - 9-C0647-10-0-0
***Special order, non-returnable. Allow 1 to 2 weeks to ship.…
G-U Handle Washer 854-16681
G-U swing door handle bushing nylatron washer 9-C0647-10-0-0. Clear. 1.0mm x 16mm (inner dia.)
......see more
G-U swing door handle bushing nylatron washer 9-C0647-10-0-0. Clear. 1.0mm x 16mm (inner dia.) ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
G-U Lift and Slide Dirigent Inside Handle 854-10154
G-U Lift and Slide Dirigent handle without hole for key cylinder. Color: White. Interior Handle and ......see more
G-U Lift and Slide Dirigent handle without hole for key cylinder. Color: White. Interior Handle and Pull only. GU Part: 6-24606-00-0-7. Used on GU Lift and Slide doors 933/936/934. 10" Long Pull Handle. Markings: 9-29519. Spindle Extension from Handle: 1". Screw Hole Centers: 3-1/8" ***Special order, non-returnable. Allow 6 to 8 weeks for shipping.…
G-U Lockable Tilt and Turn Handle 40G-46553
G-U Ferco Spacio geared tilt and turn handle with key lock. Color: EV-1 Aluminum. 22mm Fork Extensio......see more
G-U Ferco Spacio geared tilt and turn handle with key lock. Color: EV-1 Aluminum. 22mm Fork Extension. 84mm and 98mm mounting hole centers. G-U Spacio geared handle G-46553-00-0-1.…
G-U Lockable Tilt And Turn Handle 854-14666
G-U Ferco Spacio geared tilt and turn handle with key lock. Color: Dark Bronze. 22mm Fork Extension.......see more
G-U Ferco Spacio geared tilt and turn handle with key lock. Color: Dark Bronze. 22mm Fork Extension. 96mm and 104mm mounting hole centers. G-U Spacio geared handle G-46553-96-0-5. Special order, non-returnable. Will take around 3 to 4 weeks to ship.…
G-U Roller Strike Plate 854-16893
G-U Surface mount roller strike plate used with G-U Europa R2 roller door locks. GU Strike 8-00873-0......see more
G-U Surface mount roller strike plate used with G-U Europa R2 roller door locks. GU Strike 8-00873-00-0-1.…
G-U Secury Automatic Multipoint Door Lock 854-16248
GU Secury Automatic multipoint lock for entry doors 6' 8" tall. For use with Gripset h......see more
GU Secury Automatic multipoint lock for entry doors 6' 8" tall. For use with Gripset handle set. 60mm Backset. Stainless steel faceplate. 3-point, one piece locking system. This lock can only be used with Gripset Handles. 6-35185-01-R-8B
Operation:
As soon as the door pulled shut, the Automatic latchbolts instantly throw 20mm and are secured to prevent them being forced back. By turning the key or the knob, the center deadbolt will engage and lock the top and bottom latchbolts to become a 3-deadbolt locking system.
Specifications:
Faceplace Width: 16mm
Total Length: 62.59"
Backset: 60mm
PZ (Distance between Locking Cylinder and Handle): 92mm
For Door Height: 6' 8"
Central Deadbolt Throw: 1"
Lower Latch Position: 21.38"
Upper Latch Position: 31.18"
Uses American Cylinder
Non-Handed: Can be Used on Right- or Left-Handed Doors
Radius End Faceplate for Clean Look
Uses 8mm Square Spindle
Variable Handle Height (36" Suggested)…
G-U Secury Automatic Multipoint Door Lock 854-16754
GU Secury Automatic multipoint lock for entry doors 8' tall. For use with Gripset handle se......see more
GU Secury Automatic multipoint lock for entry doors 8' tall. For use with Gripset handle set. 60mm Backset. Stainless steel faceplate. 3-point, one piece locking system. This lock can only be used with Gripset Handles. 6-35185-02-R-8B
Operation:
As soon as the door pulled shut, the Automatic latchbolts instantly throw 20mm and are secured to prevent them being forced back. By turning the key or the knob, the center deadbolt will engage and lock the top and bottom latchbolts to become a 3-deadbolt locking system.
Specifications:
Faceplace Width: 16mm
Total Length: 74.80"
Backset: 60mm
PZ (Distance between Locking Cylinder and Handle): 92mm
For Door Height: 8'
Central Deadbolt Throw: 1"
Lower Latch Position: 21.38"
Upper Latch Position: 43.39"
Uses American Cylinder
Non-Handed: Can be Used on Right- or Left-Handed Doors
Radius End Faceplate for Clean Look
Uses 8mm Square Spindle
Variable Handle Height (36" Suggested)…
G-U Traco Trimset 854-11967
GU Traco trimset. Color: Brass. GU/Ferco Part 6-U5192-TR-1-03.......see more
GU Traco trimset. Color: Brass. GU/Ferco Part 6-U5192-TR-1-03.…
Garage Door Screen Roller 10-466
PGT Garage sliding screen door roller. Wheel diameter 1-3/8".
***Special order, allow 3 to 4......see more
PGT Garage sliding screen door roller. Wheel diameter 1-3/8". ***Special order, allow 3 to 4 weeks to ship.…
Gasket Traditional Series Operator 39-512
Gasket for traditional series operators......see more
Gasket for traditional series operators…
General Hex Torque Bar Arm 900-21003H
General Hex awning window torque bar arm for jalousie windows. Length: 3-1/4"......see more
General Hex awning window torque bar arm for jalousie windows. Length: 3-1/4"…
Georgia-Palm Beach Awning Operator 41-261P D
Right Hand Georgia-Palm Beach awning window operatorStraight Link Arm Link hole 3/8". Color Mill F......see more
Right Hand Georgia-Palm Beach awning window operator
Straight Link Arm
Link hole 3/8". Color Mill Finish…
Georgia-Palm Beach Awning Operator 41-262P D
Left hand Georgia-Palm Beach Awning OperatorStraight Link Arm Link hole 3/8". Color Mill Finish......see more
Left hand Georgia-Palm Beach Awning Operator
Straight Link Arm
Link hole 3/8". Color Mill Finish…
Giesse Adjuster Striker Plate 856-10029
Giesse adjustable single striker 01347K for windows and doors.......see more
Giesse adjustable single striker 01347K for windows and doors.…
Giesse Balcony Door Handle Silver 856-10079
Giesse Master Plus balcony door handle set. Color: Silver. Includes 8x8x110mm spindle. Giesse handle......see more
Giesse Master Plus balcony door handle set. Color: Silver. Includes 8x8x110mm spindle. Giesse handle 02422.
Pair of aluminum handles, reversible with stop, for fitting on the upright or centre rail of the door.
***Special order, non-returnable. Minimum order of 5. Allow 4-8 weeks to ship. …
Giesse Balcony Door Handle White 856-10079W
Giesse Master Plus balcony door handle set. Color: White. Includes 8x8x110mm spindle. Giesse handle ......see more
Giesse Master Plus balcony door handle set. Color: White. Includes 8x8x110mm spindle. Giesse handle 02422.
Pair of aluminium handles, reversible with stop, for fitting on the upright or centre rail of the door.
***Special order, non-returnable. Minimum order of 5. Allow 5-10 weeks to ship. …
Giesse Balcony Door Lock 16-863-45
Giesse Balcony door lock. Backset: 45mm (1.75). Cylinder To Handle distance: 85mm. Giess 22/45/85
......see more
Giesse Balcony door lock. Backset: 45mm (1.75). Cylinder To Handle distance: 85mm. Giess 22/45/85 To Change Handing: Push in Spring latch, Unlocked Position Insert screw driver in round hole on back of lock case and push latch out. Pull latch out and Rotate. Push spring latch back into lock case Test lock operation before installing …
Giesse Chic 3D 100 Sash Hinge Set 856-10154LH
Giesse window sash hinge set for Chic 3D 100. Left Hand. Set of hinges (top and bottom) for side-hun......see more
Giesse window sash hinge set for Chic 3D 100. Left Hand. Set of hinges (top and bottom) for side-hung or secondary sash with tilt-and-turn CHIC 3D 100. Giesse Sash Hinge Set 043542.
Technical Features:
Sash opening to 180°.
Maximum load capacity :100 kg.
Assembly is simple, fast and easy using the special pre-assembled cams.
When there is an additional fastening mechanism, you need to use the CHIC fastening element.
Both hinges are adjustable (3D).
If opening is obstructed, you need to use the FRIZ limitation arm.
CAUTION: This hinge is designed to be used only on inward opening casements and is not suitable for outward opening casements.
***Special order, non-returnable, non-cancellable. Allow around 6 to 12 weeks to ship. Minimum order of 5.
Right Hand Hinge Set: 856-10154RH.…
Giesse Chic 3D 100 Sash Hinge Set 856-10154RH
Giesse window sash hinge set for Chic 3D 100. Right Hand. Set of hinges (top and bottom) for side-hu......see more
Giesse window sash hinge set for Chic 3D 100. Right Hand. Set of hinges (top and bottom) for side-hung or secondary sash with tilt-and-turn CHIC 3D 100. Giesse Sash Hinge Set 043541.
Technical Features:
Sash opening to 180°.
Maximum load capacity :100 kg.
Assembly is simple, fast and easy using the special pre-assembled cams.
When there is an additional fastening mechanism, you need to use the CHIC fastening element.
Both hinges are adjustable (3D).
If opening is obstructed, you need to use the FRIZ limitation arm.
CAUTION: This hinge is designed to be used only on inward opening casements and is not suitable for outward opening casements.
***Special order, non-returnable, non-cancellable. Allow around 6 to 12 weeks to ship. Minimum order of 5.
Left Hand Hinge Set: 856-10154LH.…
Giesse Euro Cremone Handle 856-16186W
Giesse Euro 900 Cremone Tilt and Turn Window handle with One way operation. Color: White. Funct......see more
Giesse Euro 900 Cremone Tilt and Turn Window handle with One way operation. Color: White. Functions: Reversible cremone (LH or RH), for operating Giesse Tilt-and-Turn Window and Tilt-and-Turn Window with Microventilation mechanisms. The Euro cremone is supplied pre-assembled right-handed. Screw hole disctance 98mm(3.86"). Giesse handle: 01108410. One way version.
Parts Included:
1 Handle
1 Fixing Plate
2 HSHC Screws M5x14
Materials:
Die–cast aluminium handle
Cremone case, gear racks in die-cast zamak
Internal sheath and Hostaform plate Spring, screws and fixing plate in stainless steel
***Minimum order 10. Special order, non-returnable. Allow around 4-6 weeks to ship.
This handle is also offered in other versions, if this handle doesn't match yours, please contact us at 727-386-4629.…
Giesse Gear 856-10021
Giesse multipoint gear box only. Backset: 35mm (1.38). Cylinder To Handle distance: 85mm. Giesse doo......see more
Giesse multipoint gear box only. Backset: 35mm (1.38). Cylinder To Handle distance: 85mm. Giesse door lock 04646000 To Change Handing: Push in Spring latch, Unlocked Position Insert screw driver in round hole on back of lock case and push latch out. Pull latch out and Rotate. Push spring latch back into lock case Test lock operation before installing …
Giesse Gear 856-10050
Giesse multipoint gear box only. Backset: 45mm (1.75). Cylinder To Handle distance: 92mm.
To C......see more
Giesse multipoint gear box only. Backset: 45mm (1.75). Cylinder To Handle distance: 92mm. To Change Handing: Push in Spring latch, Unlocked Position Insert screw driver in round hole on back of lock case and push latch out. Pull latch out and Rotate. Push spring latch back into lock case Test lock operation before installing …
Giesse GOS-S Lock Lower Assembly 856-10120
Giesse Euro cylinder lock device for sliding door lock. This is the lower assembly which a......see more
Giesse Euro cylinder lock device for sliding door lock. This is the lower assembly which attaches to the upper assembly to operate the locking cylinder and handle. Includes locking device, upper attachment which connects to handle assembly, cylinder backplate, cylinder bracket cover (satin chrome), and installation screws. Giesse Lock Device 0295200501. This part can be used with GOS-S mechanism 856-16150 or 856-10076. Special order, non-returnable. Allow 2 to 4 weeks to ship.…
Giesse Handle 40-1009S
***Item discontinued. Use 856-10088 or 856-10079
Giesse balcony door handle set. Color Silver. In......see more
***Item discontinued. Use 856-10088 or 856-10079 Giesse balcony door handle set. Color Silver. Includes interior and exterior handles and spindle. …
Giesse Handle 856-01024UW
Giesse Prima Cremone Window handle. Color White. Type: Version for Sash. Screw hole distance 104mm(4......see more
Giesse Prima Cremone Window handle. Color White. Type: Version for Sash. Screw hole distance 104mm(4-1/16"). Giesse handle: 01024U. Includes (1) fixing plate and (2) HSHC screws M5x14.
Technical Info:
Depending on the version, they are available with snap positioning of the pull handle at 0°, 90°, 135° and 180°.
The PRIMA cremone is supplied pre-assembled right-handed. Available in both one-way and two-way versions.
Depending on the version, the C/C distances of 84, 98 and 104 mm are possible.
If needed with different hole measurements or a different version, please call us at 727-386-4629.
***Special order, non-returnable. Minimum order of 5 required. Please call before ordering.…
Giesse Handle 856-10088B
Giesse prima plus balcony door tilt and turn handle. Color Black. For doors 3" to 3-1/4&qu......see more
Giesse prima plus balcony door tilt and turn handle. Color Black. For doors 3" to 3-1/4" thick. Spindle length: 4-3/8". This is the Interior and Exterior lever with spindle, no screws. ***Not always in stock. May take 1 to 2 weeks to ship.…
Giesse Handle 856-10088SLV
Giesse Prima Plus balcony door tilt and turn handle. Color Silver. For doors 3" to 3-......see more
Giesse Prima Plus balcony door tilt and turn handle. Color Silver. For doors 3" to 3-1/4" thick. Spindle length: 4-3/8". This is the Interior and Exterior lever with spindle, no screws. Giesse door handle. ***Special order, Allow 1 to 2 weeks to ship.…
Giesse Handle 856-10088W
Giesse Prima Plus balcony door tilt and turn handle. Color White. For doors 3" to 3-1......see more
Giesse Prima Plus balcony door tilt and turn handle. Color White. For doors 3" to 3-1/4" thick. Spindle length: 4-3/8". This is the Interior and Exterior lever with spindle, no screws. Giess handle 02792. ***Not always in stock. May take 1 to 2 weeks to ship.…
Giesse Handle Cover Plate Silver 856-10096SV
Giesse handle cover plate for mechanism. Color: Silver. Giesse part: 04150372. Not always in stock, ......see more
Giesse handle cover plate for mechanism. Color: Silver. Giesse part: 04150372. Not always in stock, may take 6 weeks to ship. Minimum order 20.…
Giesse Hinge Adjuster Key 856-16167
Giesse door hinge adjuster key. For adjustment of clamp door hinges and front-fitting hinges. Giesse......see more
Giesse door hinge adjuster key. For adjustment of clamp door hinges and front-fitting hinges. Giesse adjustment key 03900. ***Special order, non-returnable, non-cancellable. Minimum order 5. Allow 12-16 weeks to ship.…
Giesse Kora Handle 856-16170S
Giesse Kora window handle. Color: Silver.
***This item is a special order and requires a 10......see more
Giesse Kora window handle. Color: Silver. ***This item is a special order and requires a 10 piece minimum. Shipping is estimated around 90 days. Order is non-returnable and non-cancellable.…
Giesse Lock Cylinder Cover Plate 856-10036
Giesse lock cylinder cover plate. Color: Silver.
Non-returnable.......see more
Giesse lock cylinder cover plate. Color: Silver. Non-returnable.…
Giesse Lock Cylinder Cover Plate 856-10036W
Giesse lock cylinder cover plate. Color White.
Price for in stock only. Non-returnable.......see more
Giesse lock cylinder cover plate. Color White. Price for in stock only. Non-returnable.…
Giesse Mortise Lock Gear 856-10123
Giesse multipoint mortise gear box only. Backset: 30mm (1.18). Cylinder To Handle distance: 85mm. Gi......see more
Giesse multipoint mortise gear box only. Backset: 30mm (1.18). Cylinder To Handle distance: 85mm. Giesse Top-Bottom Lock for Euro grove profiles. Used with top and bottom shootbolt rods. Giesse lock 0462701.
Info:
Function: Central lock, slip-on version for aluminum stiles, with adjustable spring latch and tilting bolt, ready for rod connection for top/bottom fastening mechanism.
Compatible with European cylinders, has a burglar-proof tilting bolt.
Reversible spring latch (RH or LH), adjustable from 10 to 15 mm.
Bolts operated with the cylinder.
Spring latch operated with the cylinder and with the 8 mm handle spindle.
Cylinder handle C/C distance 85 mm.
Bolt with thickness of 10 mm and minimum protrusion of 24 mm.
Spring latch with 10 to 15 mm protrusion.
The pair of two-way adapters supplied with the lock, for connecting to the polyamide rod, enables making top bottom locking at several points.
Stroke is 15.5 mm.
The adapters for connecting to the rod have connecting pins size 8 mm.
To Change Handing:
Push in Spring latch, Unlocked Position
Insert screw driver in round hole on back of lock case and push latch out.
Pull latch out and Rotate.
Push spring latch back into lock case.
Test lock operation before installing.
***Special order, non-returnable. Allow 1 to 2 weeks to ship.…
Giesse Nova Cremone Handle 40-1022SV
Giesse Nova Cremone Window handle with Two way operation. Color: Silver. Reversible cremon......see more
Giesse Nova Cremone Window handle with Two way operation. Color: Silver. Reversible cremone handle (LH or RH), ideal for outward opening systems and shutters, with handle rotation to 90° and opening and closing positioning notch.
Screw hole distance 108mm(4-1/4"). Giesse handle: 01004. Two way version. Type: Outward Opening. Slider length: 19mm.
Materials:
Die–cast aluminium handle
Die–cast Zamak case, gear, rack and slides
Extruded aluminium case cover
Reinforced nylon base
***Minimum order 10. Special order, non-returnable, non-cancellable. Allow around 6-8 weeks to ship.
***Colored photo shown just for reference. This handle is Silver.…
Giesse OS Operator Arm 856-10044
Giesse operator arm for Giesse OS operator mechanism. 6-3/4" long arm with aluminum slider. Use......see more
Giesse operator arm for Giesse OS operator mechanism. 6-3/4" long arm with aluminum slider. Used on casement and awning windows. Giesse arm 02064000. OS Operator Mechanism: 856-10032.…
Giesse OS Operator Mechanism 856-10032
Giesse OS Operator Mechanism for casement and awning windows with restricted opening. Two-......see more
Giesse OS Operator Mechanism for casement and awning windows with restricted opening. Two-handed mechanism that moves the sash of a Top or Side Hung aluminum casement, creating 2 locking points on the casement. Standard version total length: 725mm(28.5"). Giesse OS1 Operator Mechanism: 02000. Includes two lock points.
The OS Operator mechanism has three functions:
- Moves the window from closed to fully open (limited) and vice-versa
- Provides 2 locking points on the handle side
- Provides for a limited Egress 4 inch Opening
You can adjust the 2 locking points both in compression (+/-3.2 mm) and side (+/- 3 mm).
Handle, extensions and OS operator arms sold separately.
This is the standard operating mechanism. Also available in a reduced size for small window openings. Please contact us if you need the reduced size.
Giesse OS Operator Arm (sold separately): 856-10044.
…
Giesse OS Operator Mechanism 856-10101
Giesse OS2 Operator Mechanism for casement and awning windows. Total length: 317mm(12.5"). Gies......see more
Giesse OS2 Operator Mechanism for casement and awning windows. Total length: 317mm(12.5"). Giesse OS2 Operator Mechanism 02009 or 2158300. Reversible mechanism that moves the sash of a Top or Side Hung aluminium casement.
Giesse never stands still, and has upgraded the OS Operator mechanism once again with the introduction of the new version 2.0. Outswing windows can now be fitted with locking points on 3 sides, greatly improving the Air/Wind/Watertightness of the window, and its overall strength. The OS Operator 2.0 is also compatible with small window sizes, widely used and in demand on different markets
Product highlights
- The OS operator 2.0 system to be applied requires a specific profile cross-section.
- The front force for opening the sash must be < 50 N. For forces > 35 N it is mandatory to use “loose rivet” arms.
- The OS operator system performs a dual function.
- The sash is moved from the closed position to the open position, limited in safety.
- The locking points engage and disengage.
- With OS operator 2.0 you can apply locking points (sold separately) connected by a rod made of polyamide, on 3 sides of the casement (mechanism side and arms side)
-OS operator casement requires: Cremone (1 pc), Mechanism (1 pc), Arm (1 pc), Locking points (their number vary based on the size of the casement), Corner drive (2 pcs) if perimeter closing is necessary. This item is the mechanism only. All other parts sold separately.
***Not always in stock, may take 3 to 4 weeks to ship.…
Giesse OS Operator Mechanism Reduced LH 856-10040
Giesse OS Operator Reduced Mechanism for small doors. Left Hand. Length: 18-3/8".
R......see more
Giesse OS Operator Reduced Mechanism for small doors. Left Hand. Length: 18-3/8".
Reduced version total length: 466.5mm(13-3/8"). Giesse OS1 Reduced Operator Mechanism: 020022.
Locking point is adjustable.
Handle, extensions and OS operator arms sold separately.
***Price for in stock only. Non-returnable.…
Giesse OS Operator Mechanism Reduced RH 856-10039
Giesse OS Operator Reduced Mechanism for small doors. Right Hand. Length: 18-3/8".
......see more
Giesse OS Operator Reduced Mechanism for small doors. Right Hand. Length: 18-3/8".
Reduced version total length: 466.5mm(13-3/8"). Giesse OS1 Reduced Operator Mechanism: 020021.
Locking point is adjustable.
Handle, extensions and OS operator arms sold separately.
***Price for in stock only. Non-returnable.…
Giesse Prima Handle Silver 856-10004SV
Giesse Prima single door handle. Color: Silver.
***This item is a special order and require......see more
Giesse Prima single door handle. Color: Silver. ***This item is a special order and requires a 20 piece minimum. Shipping is estimated around 90 days. Order is non-returnable and non-cancellable. Please call before ordering.…
Giesse Sliding Door Drive Gear 856-16150
Giesse sliding door drive mechanism kit. Includes drive mechanism and keepers. Giesse mech......see more
Giesse sliding door drive mechanism kit. Includes drive mechanism and keepers. Giesse mechanism 02897000. Special order, non-returnable. Allow 2 to 4 weeks to ship.…
Giesse Sliding Door Handle 856-10075
Giesse sliding door handle. Color: Black. Giesse Prima GOS Handle 02908500.
Special order, non-re......see more
Giesse sliding door handle. Color: Black. Giesse Prima GOS Handle 02908500. Special order, non-returnable. Allow 2 to 4 weeks to ship.…
Giesse Sliding Door Internal Gear 856-10076
Giesse sliding door GOS-S internal handle gearbox. Internal rod drive for handle. Giesse d......see more
Giesse sliding door GOS-S internal handle gearbox. Internal rod drive for handle. Giesse drive gear 02953. Giesse GOS-S internal Euro cylinder gearbox sold separately 856-10120. ***Special order, non-returnable. Allow 4 to 6 weeks to ship. Minimum order of 10 required.…
Giesse Strike Plate 856-04655000
Giesse latch and deadbolt strike for balcony door locks.
Compatible with Giesse door locks: 856-1......see more
Giesse latch and deadbolt strike for balcony door locks. Compatible with Giesse door locks: 856-10021, 856-10050, and 16-863-45. ***Special order, will take 1-2 weeks to ship.…
Giesse Supernova Cremone Handle Black 856-16191
Giesse Supernova Cremone Window handle. Color: Black. Reversible cremone handle, for inward-ope......see more
Giesse Supernova Cremone Window handle. Color: Black. Reversible cremone handle, for inward-opening systems with handle rotation to 90° and opening/closing positioning notch. Fixing C/C distance machining 104mm and 130mm. Giesse handle: 01007.
As for the Euro Cremones, whose stylish design it incorporates, the use of quality die-cast materials together with the high reliability of the GIESSE painting system gives the SUPERNOVA Cremone high surface quality and strong resistance to external agents.
The Supernova cremone is supplied right-handed, with a fixing C/C distance of 130mm and revives the concept of unification also using the standard
Euro machining of 104mm.
Materials:
Handle in die-cast aluminium.
Die-cast Zamak case, gears, racks and sliding
parts.
Stainless steel screws
Parts:
2 CH screws M4x10
***Minimum order 20. Special order, non-returnable, non-cancellable. Allow around 8 to 12 weeks to ship.…
Giesse Totem Bolt Channal 856-16204
Giesse totem bolt 02073 for 15 x 20 groove. One-way lever bolt to mount in a channel, indicated......see more
Giesse totem bolt 02073 for 15 x 20 groove. One-way lever bolt to mount in a channel, indicated in doors made with window profile.
Technical Features:
Bolt suited for mounting on doors for frequent use (use category 4 - very heavy duty use - In compliance with EN12051: 1999).
Reversible, it is applied both at the top and at the bottom of the door. Bolt tip with cut-proof characteristics, in order to ensure a great hold on the
strikers and high break-in security.
Bolt tip stroke 21 mm.
Compression adjustment +0.6 mm on the strikers with the eccentric bush provided (except on the version for groove 15x18).
Fixing to the profile with the two pre-assembled fixing grub screws, without any machining on the profile.
It is possible to extend the bolt by using the specific rod in the series, positioned between the connecting element and the terminal.
***Special order, non-returnable. Allow 4 to 8 weeks to ship. Minimum order of 5 required.…
Giesse Unica Cremone Handle 856-10067
Giesse single directional unica cremone window handle with 20mm fork. Color: Black. Used on til......see more
Giesse single directional unica cremone window handle with 20mm fork. Color: Black. Used on tilt and turn windows. Giesse Unica Cremone Handle 01165500N. Reversible cremone handle for actioning Giesse mechanisms. Fork drive handle.
Specs:
Mounting Hole Centers: 104mm (4.09")
Type of Opening: External - Shutters
Operation: One-Way
**Special order, non-returnable. Minimum order of 20. Allow around 6-8 weeks to ship.…
Giesse Unica Cremone Handle 856-16154
Giesse unica cremone window handle with no internal parts. Used on tilt and turn windows. Color: Whi......see more
Giesse unica cremone window handle with no internal parts. Used on tilt and turn windows. Color: White. Giesse Unica Cremone Handle 01150410001.
Cremone with no internal components. Depending on need, it can be transformed into a Cremone for inward opening, outward opening casement or tilt-and-turn by using the specific kits.
**Not always in stock, may take 3 to 4 weeks to ship. Please call to check stock and price before ordering. Special order, non-returnable.…
Giesse Unica Cremone Handle 856-16154B
Giesse unica cremone window handle with no internal parts. Used on tilt and turn windows. Color: Bla......see more
Giesse unica cremone window handle with no internal parts. Used on tilt and turn windows. Color: Black. Giesse Unica Cremone Handle 01150500001.
Cremone with no internal components. Depending on need, it can be transformed into a Cremone for inward opening, outward opening casement or tilt-and-turn by using the specific kits.
**Special order, non-returnable. Minimum order of 5. Allow around 4-8 weeks to ship.
**Colored image is white for reference only.…
Giesse Unica Cremone Handle Kit 856-02407
Giesse unica system cremone kit for the unica cremone handle with no internal components. Kit for ou......see more
Giesse unica system cremone kit for the unica cremone handle with no internal components. Kit for outward opening Unica system slider 20. Components that, added to the Unica Cremone without internal components, enable converting them into the finished product. Giesse Opening Kit Unica System 02407. Used with Giesse handle 856-16154.
Markings of Fork: B3232
Fork Length: 26mm.…
Giesse Unica Cremone Handle Kit 856-10073
Giesse unica system cremone kit for the unica cremone handle with no internal components. Kit for in......see more
Giesse unica system cremone kit for the unica cremone handle with no internal components. Kit for internal opening Unica system.
Components that, added to the Unica Cremone without internal components, enable converting them into the finished product. Used on windows. Giesse Opening Kit Unica System 04080. Used with Giesse handle 856-16154.…
Giesse Unica Handle 856-10035
Giesse window handle replacement. Color: Silver. Giesse Unica OS Operator Cremone with long pull han......see more
Giesse window handle replacement. Color: Silver. Giesse Unica OS Operator Cremone with long pull handle used with OS window operators. 172mm Long handle. Giesse handle 01128. ***Special order, non-returnable. Allow around 1 to 2 weeks to ship.…
Giesse Unica Handle 856-10035B
Giesse window handle for casement and awning windows. Color: Black. Giesse Unica OS Operator Cremone......see more
Giesse window handle for casement and awning windows. Color: Black. Giesse Unica OS Operator Cremone with long pull handle. 172mm Long Giesse handle 01128500. **Not always in stock, may take 3 to 4 weeks to ship. Please call to check stock and price before ordering.…
Giesse Unica Handle 856-10035W
Giesse window handle. Color: White. Giesse Unica OS Operator Cremone with long pull handle. 172mm Lo......see more
Giesse window handle. Color: White. Giesse Unica OS Operator Cremone with long pull handle. 172mm Long Handle. Giesse handle 01128376. **Not always in stock, may take 3 to 4 weeks to ship. Please call to check stock and price before ordering.…
Glass Screen Door Keeper 900-69
Yale Ogron sliding glass and screen door keeper. Mill finish. Length: 3".......see more
Yale Ogron sliding glass and screen door keeper. Mill finish. Length: 3".…
Glass-Screen Door Keeper 12-207
Sliding patio screen door keeper. Mill finish. 1-5/8" Height.......see more
Sliding patio screen door keeper. Mill finish. 1-5/8" Height.…
Glass-Screen Door Keeper 12-211
Narrow sliding screen door keeper. Chrome plated. Overall Length: 2-3/4".......see more
Narrow sliding screen door keeper. Chrome plated. Overall Length: 2-3/4".…
Glass-Screen Door Keeper 12-214
Chrome plated sliding patio door keeper.......see more
Chrome plated sliding patio door keeper.…
Glass-Screen Door Keeper 12-237
Universal strike kit. Finish Aluminum.......see more
Universal strike kit. Finish Aluminum.…
Glass-Screen Door Keeper 12-240
Patio door keeper steel 3/8 inch......see more
Patio door keeper steel 3/8 inch…
Glass-Screen Door Keeper 12-251
Chrome plated patio door keeper - miller......see more
Chrome plated patio door keeper - miller…
Glass-Screen Door Keeper 12-268
White nylon plastic screen door keeper. Used on PGT and Lawson screen doors.......see more
White nylon plastic screen door keeper. Used on PGT and Lawson screen doors.…
Glass-Screen Door Keeper 12-287
Bayform patio screen door keeper. Die cast.......see more
Bayform patio screen door keeper. Die cast.…
Glass-Screen Door Keeper Black 12-268B
Black nylon plastic screen door keeper. Used on PGT and Lawson screen doors.......see more
Black nylon plastic screen door keeper. Used on PGT and Lawson screen doors.…
Glazing Bead Sample Ring 500-98NEW
The #500-98NEW contains 126 of the most popular vinyl and metal glazing bead samples organized by sh......see more
The #500-98NEW contains 126 of the most popular vinyl and metal glazing bead samples organized by shape and color. Approximately 1-1/2" long on a large
stainless steel ring with locking screw threads.
-Take the ring of beads to your job repair site so you can
identify broken beads in a minute.
-Avoid the clutter of keeping your samples in a bag or box,
losing pieces, and save time with the ring program.
-Each ring keeps all your glazing bead samples together
and organized so you are not losing samples, and can find
them all right away to identify the bead you need.
-Each bead has a label with part number on it. You can add
or remove beads as you need to or reorganize the beads
the way you want them.…
Glazing Channel 67-10
Glazing channel for double strength glass 1/8". Channel depth: 15/64". Metal opening 7/32&......see more
Glazing channel for double strength glass 1/8". Channel depth: 15/64". Metal opening 7/32" to 15/64". Color: Grey. Sold in 100 feet rolls.…
Glazing Channel 67-14
Glazing channel for 3-16 inch glass, Color: Grey. Sold in 100 feet rolls.......see more
Glazing channel for 3-16 inch glass, Color: Grey. Sold in 100 feet rolls.…
Glazing Channel 67-2
Grey vinyl glazing channel for 1/16" thick single strength glass. Channel Depth 13/64" Met......see more
Grey vinyl glazing channel for 1/16" thick single strength glass. Channel Depth 13/64" Metal Opening 9/64" to 11/64". Sold in 100 feet roll.…
Glazing Channel 67-43
Glazing window channel for 3/16" glass, color Black. Sold in 200 feet roll.......see more
Glazing window channel for 3/16" glass, color Black. Sold in 200 feet roll.…
Glazing Channel 67-5
Glazing channel Channel Depth 17/64" Metal Opening 3/16" to 9/32". Glazing Channel fo......see more
Glazing channel Channel Depth 17/64" Metal Opening 3/16" to 9/32". Glazing Channel for Single Strength Glass 1/16". Sold in 100 feet rolls.…
Glazing Channel 67-9
Grey vinyl glazing channel for 1/8" double strength glass. Channel Depth 9/32" Metal Openi......see more
Grey vinyl glazing channel for 1/8" double strength glass. Channel Depth 9/32" Metal Opening 1/4" to 14/64". Sold in 100 feet rolls.…
Glazing Channel 900-21729NS
Glazing channel for 5-8 inch glass color Black. Sold in multiples of 100'......see more
Glazing channel for 5-8 inch glass color Black. Sold in multiples of 100'…
Glazing Channel 900-21986
Glazing channel for 5-8 inch glass color Black. Sold in multiples of 100'......see more
Glazing channel for 5-8 inch glass color Black. Sold in multiples of 100'…
Glazing Clip 900-5371modb
Thermal Isolator Assembly Glazing Clip 900-5371modb. White Plastic. Used by Alsco Anaconda.......see more
Thermal Isolator Assembly Glazing Clip 900-5371modb. White Plastic. Used by Alsco Anaconda.…
Glazing Spline 68-10
Vinyl glazing spline. Color: Gray. Fits 80-85% of all spline type aluminum windows. Fits all ty......see more
Vinyl glazing spline. Color: Gray. Fits 80-85% of all spline type aluminum windows. Fits all type glazing spline. Sold in 100 feet roll.
To determine if the product is the correct size and shape you need, follow the instructions below:
1) Click the link to our PDF catalog. Window/Door Glazing & Weather-stripping pages 292-316
2) Once open, go to the page the product you are looking for is on.
3) Print the page out and place a sample of yours over top of the "Actual Size" photo to see if its a match. …
Glazing Spline 68-3
Vinyl glazing spline. Color: Gray. Fits 80-85% of all spline type aluminum windows. Fits all ty......see more
Vinyl glazing spline. Color: Gray. Fits 80-85% of all spline type aluminum windows. Fits all type glazing spline. Sold in 100 feet roll.
To determine if the product is the correct size and shape you need, follow the instructions below:
1) Click the link to our PDF catalog. Window/Door Glazing & Weather-stripping pages 292-316
2) Once open, go to the page the product you are looking for is on.
3) Print the page out and place a sample of yours over top of the "Actual Size" photo to see if its a match. …
Glazing Spline 68-4
Vinyl glazing spline. Color: Gray. Fits 80-85% of all spline type aluminum windows. Fits all ty......see more
Vinyl glazing spline. Color: Gray. Fits 80-85% of all spline type aluminum windows. Fits all type glazing spline. Sold in 100 feet roll.
To determine if the product is the correct size and shape you need, follow the instructions below:
1) Click the link to our PDF catalog. Window/Door Glazing & Weather-stripping pages 292-316
2) Once open, go to the page the product you are looking for is on.
3) Print the page out and place a sample of yours over top of the "Actual Size" photo to see if its a match. …
Glazing Spline 900-15846
Glazing spline with flexible fin color Gray. Sold in multiples of 100 feet only.......see more
Glazing spline with flexible fin color Gray. Sold in multiples of 100 feet only.…
Glazing Spline 900-16077
Glazing spline with flexible fin color Gray. Sold in multiples of 100 feet only.......see more
Glazing spline with flexible fin color Gray. Sold in multiples of 100 feet only.…
Glazing Spline 900-9465B
Vinyl glazing spline. Color: Black. Fits 80-85% of all spline type aluminum windows. Fits all t......see more
Vinyl glazing spline. Color: Black. Fits 80-85% of all spline type aluminum windows. Fits all type glazing spline. Sold in 100 feet roll.
To determine if the product is the correct size and shape you need, follow the instructions below:
1) Click the link to our PDF catalog. Window/Door Glazing & Weather-stripping pages 292-316
2) Once open, go to the page the product you are looking for is on.
3) Print the page out and place a sample of yours over top of the "Actual Size" photo to see if its a match. …
Glazing Spline WDV 7 BK
Contact info
Heather MacPherson
aj@drmasonry.com
Transaction Id 1Y027231RF6327041
Original Payment $163.95 USD
Total Refund Amount 163.95
Invoice Number 1220144932
Note To Buyer refund order cancelled. No longer available in 100 ft rolls...see more
Black vinyl glazing spline. Color: Black. Fits 80-85% of all spline type aluminum windows. Fits all type glazing spline. Sold in 300 ft roll.
To determine if the product is the correct size and shape you need, follow the instructions below:
1) Click the link to our PDF catalog. Window/Door Glazing & Weather-stripping pages 292-316
2) Once open, go to the page the product you are looking for is on.
3) Print the page out and place a sample of yours over top of the "Actual Size" photo to see if its a match. …
Graham Window Sash Guide 60-624
Graham window sash guide replacement. Color: White. Length: 1-13/32". Non-tilt window balance g......see more
Graham window sash guide replacement. Color: White. Length: 1-13/32". Non-tilt window balance guide HWP878.…
Gray Mirror Pull Self Adhesive 900-16101-1
Gray Mirror Pull Self Adhesive 900-16101-1......see more
Gray Mirror Pull Self Adhesive 900-16101-1…
Gray Vinyl Hollow Round Spline 66-10
0.165 inches (11/64") 250 feet Gray Vinyl Hollow Round Spline. sold by the roll......see more
0.165 inches (11/64") 250 feet Gray Vinyl Hollow Round Spline. sold by the roll…
Greenhouse Operator 900-21266BK
Greenhouse operator handle included. Color Black......see more
Greenhouse operator handle included. Color Black…
Grey Vinyl Hollow Ribbed Screen Spline 66-6
Vinyl hollow ribbed window screen spline 0.140 inches (9/64"). Color: Grey. 250 ft roll.
Repla......see more
Vinyl hollow ribbed window screen spline 0.140 inches (9/64"). Color: Grey. 250 ft roll.
Replacement spline for metal and fiberglass screening.…
Grommet 8-259
Grommet bushing used with pin assembly 1-145A. Also used on closet doors. Priced each individually, ......see more
Grommet bushing used with pin assembly 1-145A. Also used on closet doors. Priced each individually, sold in multiples of 10.…
Groove Pin w/ Clip 20-409
Groove pin with clip. Large, 1-4".......see more
Groove pin with clip. Large, 1-4".…
GU 45/92 Single Point Door Lock 854-15563
G-U single point door lock. Backset: 45mm(1.75). Key cylinder below handle. Cylinder hole with inser......see more
G-U single point door lock. Backset: 45mm(1.75). Key cylinder below handle. Cylinder hole with insert that accepts a tailpiece. G-U Lock 6-C4873-45-0-8. Lock Markings: 6-33105-AS-0-0; 45/92. 9-49555-12-0-1; 9-39432-12 45/92.…
GU Adjustable Strike Plate Left Hand 854-10531
GU Adjustable Strike Plate Left Hand 854-10531. GU part number: 6-29094-02-L. Right hand SHOWN in di......see more
GU Adjustable Strike Plate Left Hand 854-10531. GU part number: 6-29094-02-L. Right hand SHOWN in diagram. Special order, may take 3-4 weeks to ship. Non-returnable.…
GU Adjustable Strike Plate Right Hand 854-10532
GU Adjustable Strike Plate Right Hand 854-10532. GU part number: 6-29094-02-R. Special order, may ta......see more
GU Adjustable Strike Plate Right Hand 854-10532. GU part number: 6-29094-02-R. Special order, may take 3-4 weeks to ship. Non-returnable.…
GU Alu-Jet Strike 854-16854
GU Strike Plate used on GU tilt and turn windows. For frame grove distance, A = 2mm. Finish: Silver.......see more
GU Strike Plate used on GU tilt and turn windows. For frame grove distance, A = 2mm. Finish: Silver. G-U Strike 6-37261-01-0-1.
Item Markings on Bottom: 9-48467; 6871. Top Markings: 01.
Sold each.
**Special order, non-returnable. Allow 4 weeks for shipping.…
GU Alu-Jet Strike 854-16855
GU Strike Plate used on GU tilt and turn windows. For frame grove distance, A = 1.5mm. Finish: Slive......see more
GU Strike Plate used on GU tilt and turn windows. For frame grove distance, A = 1.5mm. Finish: Sliver. G-U Strike 6-37261-02-0-1
Item Markings on Bottom: 9-48467; 6871. Top Markings: 02.
Sold each.
**Special order, non-returnable. Allow 4 weeks for shipping.…
GU Astragal Mortise Lock Flush Bolt 854-14925
G-U Astragal mortise lock flip lever flush bolt lock body. Rod Backset: 26mm. Used to secure the ina......see more
G-U Astragal mortise lock flip lever flush bolt lock body. Rod Backset: 26mm. Used to secure the inactive panel on French doors. Stainless steel. Rods sold separately.
Astragal flush bolt K-15213-00-0-8.
This system is designed for doors between 6’-8” and 10’-0” tall where a flush bolt is desired. (Rods sold separately.) The inactive door panel on a
double door is secured by flipping the lever 180 degrees with your finger which either engages or disengages both the top and bottom shoots.
Overall size of flip lever is 250mm long X 20mm wide X 32mm deep.
Projection of rod is 14mm top and 14mm bottom.
Rod size is ø10 mm (length varies).
Non-handed.
Flip lever body is constructed of steel.
***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU BKS European Key Cylinder 854-16975
G-U BKS European profile cylinder in Satin Nickel finish for 2-3/4" thick doors with offset. 55......see more
G-U BKS European profile cylinder in Satin Nickel finish for 2-3/4" thick doors with offset. 55/31 Offset Cylinder. Includes round rotary knob. Used on active door locks.
Exterior Measurement: 55mm
Interior Measurement: 31mm.
***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Bullet Door Catch Plastic Shim 854-16945
Plastic shim 9-44889-19-0-1 for G-U bullet door catch.
***Special order, non-returnable. Allow 3 ......see more
Plastic shim 9-44889-19-0-1 for G-U bullet door catch. ***Special order, non-returnable. Allow 3 to 4 weeks to ship. Minimum order of 5 required.…
GU Bullet Door Catch, 12mm 854-15044
G-U Bullet Door Catch, 12mm. GU Catch K-17044-00-0-1.
Special order, non-returnable. Allow 3 t......see more
G-U Bullet Door Catch, 12mm. GU Catch K-17044-00-0-1.
Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Casement Hinge Set 854-16184
GU 10" casement hinge set. Includes left and right hand steel hinges and stainless steel tracks......see more
GU 10" casement hinge set. Includes left and right hand steel hinges and stainless steel tracks. ***Special order, allow 3 weeks to ship.…
GU Casement Window Lock 854-11000
GU casement window multipoint locking handle. Color: White. Nylon housing with metal lever. 3-5/16&q......see more
GU casement window multipoint locking handle. Color: White. Nylon housing with metal lever. 3-5/16" mounting holes. Patent: 5,620,213 and 2,142,071.…
GU Cremona 30/92 Active Gear Shootbolt 854-12321
GU Cremona 1.187" (30/92) Backset Manual Gear with Shootbolt
This is the gear and botto......see more
GU Cremona 1.187" (30/92) Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412. Installation Screws: 854-11101.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-12321
30/92 8-16-889-1900 US SF
30mm
(1.187)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Cremona 35/92 Active Gear Shootbolt 854-10897
GU Cremona 1.38" (35/92) Backset Manual Gear with Shootbolt, Silver Faceplate
This is t......see more
GU Cremona 1.38" (35/92) Backset Manual Gear with Shootbolt, Silver Faceplate
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optional extension available for doors greater than 81" 854-14412. Installation Screws: 854-11101. 6-33244-01-0-1
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-10897
35/92 8-16-889-1900 US SF
6-33244-01-0-1
35mm
(1.38)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Cremona 35/92 Active Gear Shootbolt 854-10898
GU Cremona 1.38" (35/92) Backset Manual Gear with Shootbolt, Black Faceplate
This ......see more
GU Cremona 1.38" (35/92) Backset Manual Gear with Shootbolt, Black Faceplate
This is the gear and bottom shootbolt with a Matte Black Faceplate. Top Shootbolt 854-14429 sold separately. Optionial extension availabe for doors greater than 81" 854-14415. Installation Screws: 854-11100.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
Commonly used on Pella doors.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-10898
35/92 8-16-889-1900 US BK
35mm
(1.38)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Black
…
GU Cremona 35/92 Active Gear Shootbolt 854-10899
GU Cremona 1.38" (35/92) Backset Manual Gear with Shootbolt, Stainless Steel faceplate.
......see more
GU Cremona 1.38" (35/92) Backset Manual Gear with Shootbolt, Stainless Steel faceplate.
This is the gear and bottom shootbolt with a stainless steel faceplate. Top Shootbolt 854-14431 sold separately. Optionial extension availabe for doors greater than 81" 854-14417. Installation Screws: 854-11103. G-U Lock: 6-33244-01-0-8
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-10899
35/92 8-16-889-1900 US SS
6-33244-01-0-8
35mm
(1.38)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Stainless Steel
…
GU Cremona 35/92 Active Gear Shootbolt 854-12327
GU Cremona 1.38" (35/92) Backset Manual Gear with Shootbolt, Silver Faceplate. For Europea......see more
GU Cremona 1.38" (35/92) Backset Manual Gear with Shootbolt, Silver Faceplate. For European profile cylinder.
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optional extension available for doors greater than 81" 854-14412. Installation Screws: 854-11101.
G-U Lock 6-UA244-35-1-1
**This lock uses a FULL European profile cylinder. If your lock has an American style cylinder, use 854-10897
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
**Not always in stock, may take 3 to 4 weeks to ship. Non-returnable.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-12327
35/92 8-16-889-1900 PZ FG
6-UA244-35-1-1
35mm
(1.38)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Cremona 40/92 Active Gear Shootbolt 854-12330
GU Cremona 1 9/16" (40/92) Backset Manual Gear with Shootbolt
This is the gear and bott......see more
GU Cremona 1 9/16" (40/92) Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412. Installation Screws: 854-11101.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-12330
40/92 8-16-889-1900 US SF
40mm
(1.56)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Cremona 40/92 Active Gear Shootbolt 854-12331
GU Cremona 1 9/16" (40/92) Backset Manual Gear with Shootbolt
This is the gear and bott......see more
GU Cremona 1 9/16" (40/92) Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt. Top Shootbolt 854-14429 sold separately. Optionial extension availabe for doors greater than 81" 854-14415. The faceplate of this lock is black. Installation Screws: 854-11100.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
Ferco part number: 6-UA244-40-0-6
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-12331
40/92 8-16-889-1900 US BK
40mm
(1.56)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Black
…
GU Cremona 45/92 Active Gear Shootbolt 854-12336
GU Cremona 1.75" (45/92) Backset Manual Gear with Shootbolt
This is the gear and bottom......see more
GU Cremona 1.75" (45/92) Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412. Installation Screws: 854-11101.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-12336
45/92 8-16-889-1900 US FG
45mm
(1.75)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Cremona 45/92 Active Gear Shootbolt 854-12338
GU Cremona 1.75" (45/92) Backset Manual Gear with Shootbolt
This is the gear and bottom......see more
GU Cremona 1.75" (45/92) Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt with a stainless steel faceplate. Top Shootbolt 854-14431 sold separately. Optionial extension availabe for doors greater than 81" 854-14417. Installation Screws: 854-11103.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-12338
45/92 8-16-889-1900 US SS
45mm
(1.75)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Stainless Steel
…
GU Cremona 45/92 Active Gear Shootbolt 854-12339
GU Cremona 1.77" (45/92) Backset Manual Gear with Shootbolt, Silver Faceplate. For Europea......see more
GU Cremona 1.77" (45/92) Backset Manual Gear with Shootbolt, Silver Faceplate. For European profile cylinder.
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optional extension available for doors greater than 81" 854-14412. Installation Screws: 854-11101. G-U Lock 6-UA244-45-1-1
**This lock uses a FULL European profile cylinder. If your lock has an American style cylinder, use 854-12336
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
**Special order, non-retrunable. Allow 3 to 4 weeks to ship.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-12339
45/92 8-16-889-1900 PZ FG
6-UA244-45-1-1
45mm
(1.77)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Cremona 50/92 Active Gear Shootbolt Lock 854-10900
GU Cremona Multipoint Door Lock with 2" (50/92) Backset Manual Gear with Shootbolt
This......see more
GU Cremona Multipoint Door Lock with 2" (50/92) Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optional extension available for doors greater than 81" 854-14412. Installation Screws: 854-11101.
Markings on Gearbox: 9-39432-21 50/92 G24056
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
Commonly used on Pella doors.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing the old style lock to the new style lock, modifications to strike plate holes may need be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-10900
50/92 8-16-889-1900 US FG
50mm
(2.00)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Cremona 50/92 Active Gear Shootbolt Lock 854-10901
GU Cremona 2" (50/92) Backset Manual Gear with Shootbolt, Black Faceplate
This is the g......see more
GU Cremona 2" (50/92) Backset Manual Gear with Shootbolt, Black Faceplate
This is the gear and bottom shootbolt with a Matte Black Faceplate. Top Shootbolt 854-14429 sold separately. Optional extension available for doors greater than 81" 854-14415. Installation Screws: 854-11100.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
Commonly used on Pella doors.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-10901
50/92 8-16-889-1900 US BK
50mm
(2.00)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Black
…
GU Cremona 50/92 Active Gear Shootbolt Lock 854-10903
GU Cremona 2" (50/92) Backset Manual Gear with Shootbolt. Stainless Steel Faceplate
Thi......see more
GU Cremona 2" (50/92) Backset Manual Gear with Shootbolt. Stainless Steel Faceplate
This is the gear and bottom shootbolt with a stainless steel faceplate. Top Shootbolt 854-14431 sold separately. Optionial extension availabe for doors greater than 81" 854-14417. Installation Screws: 854-11103.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
Commonly used on Pella doors.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-10900
50/92 8-16-889-1900 US SS
50mm
(2.00)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Stainless Steel
…
GU Cremona 50/92 Active Gear Shootbolt Lock 854-12342
GU Cremona 2.00" (50/92) Backset Manual Gear with Shootbolt
This is the gear and bottom......see more
GU Cremona 2.00" (50/92) Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
This lock accepts a FULL European profile cylinder.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-12342
50/92 8-16-889-1900 PZ FG
50mm
(2.00)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Cremona 55/92 Active Gear Shootbolt 854-12345
GU Cremona 2 3/16" (55/92) Backset Manual Gear with Shootbolt
This is the gear and bott......see more
GU Cremona 2 3/16" (55/92) Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412. Installation Screws: 854-11101.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-12345
55/92 8-16-889-1900 US FG
55mm
(2.187)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Cremona 60/92 Active Gear Shootbolt 854-15608
GU Cremona 2-3/8" (60/92) Backset Manual Gear with Shootbolt
This is the gear and botto......see more
GU Cremona 2-3/8" (60/92) Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412. Installation Screws: 854-11101.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-15608
60/92 8-16-889-1900 US FG
60mm
(2.38)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Cremona 60/92 Active Gear Shootbolt 854-16272
GU Cremona 2-3/8" (60/92) Backset Manual Gear with Shootbolt
This is the gear and botto......see more
GU Cremona 2-3/8" (60/92) Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt. Top Shootbolt 854-14429 sold separately. Optionial extension availabe for doors greater than 81" 854-14415. The faceplate of this lock is black. Installation Screws: 854-11100.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
***Special order, non-returnable. Allow around 3 to 4 weeks for shipping.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-16272
60/92 8-16-889-1900 US BK
60mm
(2.38)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Black
…
GU Cremona 60/92 Active Gear Shootbolt 854-16766
GU Cremona 2-3/8" (60/92) Backset Manual Gear with Shootbolt
This is the gear and botto......see more
GU Cremona 2-3/8" (60/92) Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt with a stainless steel faceplate. Top Shootbolt 854-14431 sold separately. Optionial extension availabe for doors greater than 81" 854-14417. Installation Screws: 854-11103.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
***Special order, non-returnable. Allow around 4 to 6 weeks for shipping.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-16766
60/92 8-16-889-1900 US SS
60mm
(2.38)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Stainless Steel
…
GU Cremona 60/92 Active Gear Shootbolt 854-16813
GU Cremona 2-3/8" (60/92) Backset Manual Gear with Shootbolt. Uses European key cylinder.
......see more
GU Cremona 2-3/8" (60/92) Backset Manual Gear with Shootbolt. Uses European key cylinder.
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412. Installation Screws: 854-11101.
This lock uses a European key cylinder.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
***Special order, non-returnable. Allow 3 to 4 weeks to ship.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-16813
60/92 8-16-889-1900 PZ FG
60mm
(2.38)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Cremona S2 Tongue Shootbolt Door Lock 854-10895
GU Cremona S2 Tongue and Shootbolt Door Lock 2.00" (50/92) Backset, Manual Gear. Active Do......see more
GU Cremona S2 Tongue and Shootbolt Door Lock 2.00" (50/92) Backset, Manual Gear. Active Door Lock
This is the Active gear with the bottom shootbolt, bottom tongue and top tongue. Top Shootbolt 854-14426 sold separately. Extension for doors taller than 81", 854-14412 sold separately. Installation Screws 854-11101.
Manual version engages multipoint when door handle is lifted.
The Cremona S2 5-point locking system features shoot bolts, top and bottom, and two heavy duty hook bolts for maximum security and protection against warping of the door panels. Also featured is our 90 degree locking mechanism that incorporates a standard US cylinder offering a Schlage “C” keyway system.
Latch is non-handed and can be reversed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Special order, non-returnable. Allow 3 to 4 weeks to ship.
**Note: If you have the old style gearbox, in some cases when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Multipoint Lock with 16mm Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-10895
Cremona S2 50/92 8-16-889-1900-US-FG
GU Lock: 6-33238-02-0-1
50mm
(2.00)
16mm
(0.62)
889mm
(35.00)
508mm
(20.00)
380mm
(14.96)
NA
Silver
…
GU Cremona S2 Tongue Shootbolt Door Lock 854-12311
GU Cremona S2 Tongue and Shootbolt Door Lock 1.75" (45/92) Backset, Manual Gear. 5 Point A......see more
GU Cremona S2 Tongue and Shootbolt Door Lock 1.75" (45/92) Backset, Manual Gear. 5 Point Active Door Lock
This is the G-U Active lock gear with the bottom shootbolt, bottom tongue and top tongue. Top Shootbolt 854-14426 sold separately. Extension for doors taller than 81", 854-14412 sold separately. Installation Screws 854-11101.
Manual version engages multipoint when door handle is lifted.
The Cremona S2 5-point locking system features shoot bolts, top and bottom, and two heavy duty hook bolts for maximum security and protection against warping of the door panels. Also featured is our 90 degree locking mechanism that incorporates a standard US cylinder offering a Schlage “C” keyway system.
Latch is non-handed and can be reversed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Special order, non-returnable. Allow 3 to 4 weeks to ship.
**Note: If you have the old style gearbox, in some cases when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Multipoint Lock with 16mm Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-12311
Cremona S2 45/92 8-16-889-1900-US-FG
GU Lock: 6-UA238-45-0-1
45mm
(1.75)
16mm
(0.62)
889mm
(35.00)
508mm
(20.00)
380mm
(14.96)
NA
Silver
…
GU Cremona Top Extension 854-14418
GU Cremona Extension with roller lock point. Finish: Silver FerGuard. Length: 500 mm (19.685"). GU p......see more
GU Cremona Extension with roller lock point. Finish: Silver FerGuard. Length: 500 mm (19.685"). GU part: G-16790-06-0-1R…
GU Dirigent Handle 854-10264
G-U Exterior dirigent handle only 6-25993-00-0-11. Color: Silver. Tilt and Turn Uni-Jet handle.
The......see more
G-U Exterior dirigent handle only 6-25993-00-0-11. Color: Silver. Tilt and Turn Uni-Jet handle.
The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
This handle is designed for Wood, PVC and Aluminum windows and balcony door.
Special order, not always in stock. may take 3 to 4 weeks to ship.…
GU Dirigent Handle 854-10267
GU Exterior dirigent window handle. Color: White. 6-25993-00-0-7. Tilt and turn Uni-Jet handle F/A.&......see more
GU Exterior dirigent window handle. Color: White. 6-25993-00-0-7. Tilt and turn Uni-Jet handle F/A.
The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
This handle is designed for Wood, PVC and Aluminum windows also used on some balcony doors.
**Not always in stock, may take 3 to 4 weeks to ship.…
GU Dirigent Handle 854-10430
GU tilt and turn interior dirigent handle 6-28072-38-0-5. Color: Dark Brown. Includes 1-1/2"(38......see more
GU tilt and turn interior dirigent handle 6-28072-38-0-5. Color: Dark Brown. Includes 1-1/2"(38mm) spindle. Tilt and Turn Uni-Jet handle.
The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
This handle is designed for Wood, PVC and Aluminum windows also used on some balcony doors.
***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Dirigent Handle Interior 854-10426
GU Interior dirigent handle 6-28072-33-0-11 with 33mm (1.29") spindle. Color: Silver. Tilt and ......see more
GU Interior dirigent handle 6-28072-33-0-11 with 33mm (1.29") spindle. Color: Silver. Tilt and turn Uni-Jet Dirigent window handle. 7mm x 33mm Spindle size.
The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.…
GU Dirigent Handle Spindle 854-12758
GU handle spindle for GU dirigent tilt and turn handles. 7mm x 70mm. Spindle 9-26874-16-0-1......see more
GU handle spindle for GU dirigent tilt and turn handles. 7mm x 70mm. Spindle 9-26874-16-0-1…
GU Dirigent Handle Spindle 854-12759
GU handle spindle for GU dirigent tilt and turn handles. 7mm x 118mm. Spindle 9-26874-56-0-1 fo......see more
GU handle spindle for GU dirigent tilt and turn handles. 7mm x 118mm. Spindle 9-26874-56-0-1 for sash thickness 56-68mm.…
GU Dirigent Handle Spindle 854-12760
GU handle spindle for GU dirigent tilt and turn handles. 7mm x 131mm. Spindle 9-26874-69-0-1 fo......see more
GU handle spindle for GU dirigent tilt and turn handles. 7mm x 131mm. Spindle 9-26874-69-0-1 for sash thickness 69-80mm.…
GU Door Strikes 854-16933
GU Multipoint door lock strike plates for 3" thick doors. Used with G-U Secury automatic multip......see more
GU Multipoint door lock strike plates for 3" thick doors. Used with G-U Secury automatic multipoint door locks. Stainless steel. Includes middle keeper for latch and deadbolt and 1 top and bottom keeper. 6 screws included. Non Handed with Clear Protective Film. Strike Pack K-C4777-59-0-8B. Includes 1 of G-U Latch and Deadbolt Middle Keeper: 9-C4717-59-0-8B and 2 of keeper 9-C4716-59-08B. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Dummy Mullion Striker 854-16908
G-U lever operated gear dummy mullion strike. GU Mullion Strike 9-32275-00-0-1. For Tilt and Turn dr......see more
G-U lever operated gear dummy mullion strike. GU Mullion Strike 9-32275-00-0-1. For Tilt and Turn drive-gear with fixed handle height. Screw connection directly on the dummy mullion. Item stamped GU 32275. Used on GU Uni-Jet fold and slide lock system. ***Special order, non-returnable. Not always in stock. May take 4 to 6 weeks to ship.…
GU Dummy Mullion Striker 854-16909
G-U lever operated gear dummy mullion strike. GU Mullion Strike 9-34130-00-0-1. For Tilt and Turn dr......see more
G-U lever operated gear dummy mullion strike. GU Mullion Strike 9-34130-00-0-1. For Tilt and Turn drive-gear with variable handle height. Screw connection on the side of the dummy mullion. Used on GU Uni-Jet fold and slide lock system. ***Special order, non-returnable. Allow 4 to 6 weeks to ship.…
GU Eagle Multipoint Door Lock 854-10543
Eagle Automatic Multipoint Lock, 1.77" Backset with Latch Bolts. For 6'8" ta......see more
Eagle Automatic Multipoint Lock, 1.77" Backset with Latch Bolts. For 6'8" tall door. Silver Faceplate Finish.
The automatic door lock works by simply closing the door the upper and lower latches will instantly engage. By turning the key from the outside or the knob from the inside, it will engage the 1” central deadbolt and lock the top and bottom latches to become a 3 deadbolt locking system. America version, key above the handle.
Made for an 6' 8" door and can be trimmed.
***Not always in stock, please call to check. May take 3 to 4 weeks to ship.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
GU
Number
Description
Backset
Deadbolt
Throw
Handle
Height
Bottom Latch
Bolt Position
Top Latch
Bolt Position
Faceplate
Finish
854-10543
45/92 8-16-889-2200 US FG
6-29234-01-0-1
45mm
(1.77)
25.4mm
(1.00)
889mm
(35.00)
543mm
(21.38)
793mm
(31.22)
Silver
…
GU Eagle Multipoint Door Lock 854-10550
Eagle Automatic Multipoint Lock, 1.77" Backset with Latch Bolts. For 8 ft tall door. ......see more
Eagle Automatic Multipoint Lock, 1.77" Backset with Latch Bolts. For 8 ft tall door. Silver Faceplate Finish.
The automatic door lock works by simply closing the door the upper and lower latches will instantly engage. By turning the key from the outside or the knob from the inside, it will engage the 1” central deadbolt and lock the top and bottom latches to become a 3 deadbolt locking system. America version, key above the handle.
Made for an 8 ft door and can be trimmed.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
GU
Number
Description
Backset
Deadbolt
Throw
Handle
Height
Bottom Latch
Bolt Position
Top Latch
Bolt Position
Finish
854-10550
45/92 8-16-889-2439 US FG
45mm
(1.77)
25.4mm
(1.00)
889mm
(35.00)
543mm
(21.38)
1103mm
(43.42)
Silver
…
GU Eagle Multipoint Door Lock 854-10583
Eagle Automatic Multipoint 1.77" Backset with Latch Bolts. For 8 ft tall door. S......see more
Eagle Automatic Multipoint 1.77" Backset with Latch Bolts. For 8 ft tall door. Stainless Steel Faceplate Finish.
The automatic door lock works by simply closing the door the upper and lower latches will instantly engage. By turning the key from the outside or the knob from the inside, it will engage the 1” central deadbolt and lock the top and bottom latches to become a 3 deadbolt locking system. America version, key above the handle.
Made for an 8 ft door and can be trimmed.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
GU
Number
Description
Backset
Deadbolt
Throw
Handle
Height
Bottom Latch
Bolt Position
Top Latch
Bolt Position
Finish
854-10583
45/92 8-16-889-2366 US SS EWS/
6-29586-11-R-8
45mm
(1.77)
25.4mm
(1.00)
889mm
(35.00)
543mm
(21.38)
1103mm
(43.42)
Stainless Steel
…
GU Eagle Multipoint Door Lock 854-10939
Eagle Automatic Multipoint 1.77" Backset with Latch Bolts. For 6' 8" tall do......see more
Eagle Automatic Multipoint 1.77" Backset with Latch Bolts. For 6' 8" tall door. Stainless Steel Faceplate Finish.
The automatic door lock works by simply closing the door the upper and lower latches will instantly engage. By turning the key from the outside or the knob from the inside, it will engage the 1” central deadbolt and lock the top and bottom latches to become a 3 deadbolt locking system. America version, key above the handle.
Made for an 6' 8" door and can be trimmed. Stainless Steel faceplate.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
GU
Number
Description
Backset
Deadbolt
Throw
Handle
Height
Bottom Latch
Bolt Position
Top Latch
Bolt Position
Faceplate
Finish
854-10939
45/92 8-16-889-2060 US SS
6-33974-01-R-8
45mm
(1.77)
25.4mm
(1.00)
889mm
(35.00)
543mm
(21.38)
793mm
(31.22)
Stainless
Steel
…
GU Europa 45/92 Active Lock Gear Only 854-15055
***Item discontinued. Only sold as assembly. Please contact us at 727-386-4629.
GU Europa Multipo......see more
***Item discontinued. Only sold as assembly. Please contact us at 727-386-4629. GU Europa Multipoint Door Lock Gear Only with 1.75" (45/92) Backset. Manual Gear. K-17308-08-0-0 This is the gear only. No faceplates included. Lock uses American style US cylinder. Manual version engages multipoint when door handle is lifted. Note: This is the new style gearbox. This lock will not work in place of the old style lock case. Markings on Gearbox: 9-39432-12 45/92. 9-49555-12-0-1 G24056 Non-returnable. Price for in stock only.…
GU Europa R2 Active Lock 854-12514
GU Europa R2 Active Multi Point lock with 1 roller above the handle and 1 roller below the handle. 1......see more
GU Europa R2 Active Multi Point lock with 1 roller above the handle and 1 roller below the handle. 1 3/8 inch backset.…
GU Extension 854-12610
GU Extension 250mm without lock point. Finish: Silver FerGuard Length: 250 mm (9.84")......see more
GU Extension 250mm without lock point. Finish: Silver FerGuard Length: 250 mm (9.84")…
GU Ferco Astragal Mortise Lock Flush Bolt 854-15722
G-U Astragal mortise lock. Zinc. Used on the inactive panel of double doors, french doors and garden......see more
G-U Astragal mortise lock. Zinc. Used on the inactive panel of double doors, french doors and garden doors. Rods sold separately.
Astragal flush bolt stamped 6-C7250-19-0-0.
Shoot extends to 25mm (adjustable by reducing rod length).
Non-handed mechanism.
20mm faceplate cover with radius ends.
Backset adjustable for astragal thickness 12.7mm to 28mm.
Use with 10mm round rods. (Sold separately)
The inactive door panel on a double door is secured by flipping the lever 180 degrees with your finger which either engages or disengages both the top and bottom shoots.…
GU Ferco Shootbolt Replacement Multipoint Lock 50/92
Replacement for the Old style GU Shootbolt Lock 2" 50/92 Backset Manual Gear with Sho......see more
Replacement for the Old style GU Shootbolt Lock 2" 50/92 Backset Manual Gear with Shootbolt, 20mm Faceplate Width.
GU Old Style Replacement Active Shootbolt lock with 20mm 25/32" faceplate width. This is the gear and bottom Shootbolt and includes the top shootbolt. Will fit doors up to 81" tall. Top Extension for doors taller than 81": 56-552 (sold separately).
Installation Screws (silver): 854-11101.
Commonly used on Superior Doors and others.
Note: If replacing on a Pella door with a 50/92 GU lock, you will use the gearbox only and reuse your extensions.
Manual version engages multipoint when door handle is lifted. 3 Point door lock.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
This lock uses and American style tail piece cylinder.
If you need help locating the part for your door, please call 727-386-4629 or email sales@windowanddoorparts.us.
Shootbolt Lock 20mm Faceplate Width
Specifications
Part
Number
Replaces
GU Part
Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
56-511
50/92 8-20-889-1900 US
50mm
(2.00)
20mm
(0.78)
889mm
(35.00)
250mm
(9.84)
Yellow Dichromate
(Brass Looking)
…
GU Filler Plate Extension 854-16719
GU filler plate extension for secury multipoint lock with radius edges. Round to square edges. Exten......see more
GU filler plate extension for secury multipoint lock with radius edges. Round to square edges. Extension Length 9.68" (245.9mm). Stainless Steel Finish. GU Filler Plate: 9-C4340-34-0-8B. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Filler Plate Extension 854-16971
GU filler plate extension for secury multipoint lock with radius edges. Round to squear edges. Exten......see more
GU filler plate extension for secury multipoint lock with radius edges. Round to squear edges. Extension Length 7.63" (193.7mm). Stainless Steel Finish. GU Filler Plate: 9-C4340-19-0-8B. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Flush Bolt 854-10249
GU Flush bolt for swing doors. Finish: Steel. Shootbolt extends 20mm. GU part: 6-25749-00-0.
***S......see more
GU Flush bolt for swing doors. Finish: Steel. Shootbolt extends 20mm. GU part: 6-25749-00-0. ***Special order, non-returnable, non-cancelable. Allow 6 to 12 weeks for shipping.…
GU Handle 854-10266
GU Exterior dirigent window handle. Color: Dark Brown. 6-25993-00-0-5. Tilt and turn Uni-Jet handle.......see more
GU Exterior dirigent window handle. Color: Dark Brown. 6-25993-00-0-5. Tilt and turn Uni-Jet handle.
The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
This handle is designed for Wood, PVC and Aluminum windows also used on some balcony doors.
**Not always in stock, may take 3 to 4 weeks to ship.…
GU Handle 854-10412
GU Interior dirigent handle 6-28072-00-0-11. Color: Silver. No spindle included. Tilt and turn Uni-J......see more
GU Interior dirigent handle 6-28072-00-0-11. Color: Silver. No spindle included. Tilt and turn Uni-Jet Dirigent window handle.
The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
***Special order, non-returnable. Not always in stock, may take 3 to 4 weeks to ship.…
GU Handle 854-10414
GU Interior dirigent window handle. Color: Dark Brown. 6-28072-00-0-5. Tilt and turn handle. No spin......see more
GU Interior dirigent window handle. Color: Dark Brown. 6-28072-00-0-5. Tilt and turn handle. No spindle included.
The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
This Handle is designed for Wood, PVC and Aluminum windows also used on some balcony doors.
**Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Handle 854-10427
GU tilt and turn interior dirigent handle 6-28072-33-0-5. Color: Dark Brown. Includes 1-3/8"(33......see more
GU tilt and turn interior dirigent handle 6-28072-33-0-5. Color: Dark Brown. Includes 1-3/8"(33mm) spindle. Tilt and Turn Uni-Jet handle.
The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
This handle is designed for Wood, PVC and Aluminum windows also used on some balcony doors.
***Not always in stock. May take 3 to 4 weeks to ship.…
GU Handle Interior 854-10162
GU inside handle, removable. Inside dirigent handle with spindle. Color: Dark Bronze. GU Handle ......see more
GU inside handle, removable. Inside dirigent handle with spindle. Color: Dark Bronze. GU Handle 6-24619-00-0-5. Handle Length: 240mm. Used on G-U Lift and Slide doors. GU Dirigent removable handle with spindle for lift and slide doors with 68mm sash. **Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Handle Interior 854-10163
GU inside handle, removable. Inside dirigent handle with spindle. Color: White. GU Dirigent Handle&n......see more
GU inside handle, removable. Inside dirigent handle with spindle. Color: White. GU Dirigent Handle 6-24619-00-0-7. Handle Length: 240mm. Used on G-U Lift and Slide doors. GU Dirigent removable handle with spindle for lift and slide doors with 68mm sash. **Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Handle Set Screw 854-14048
GU lever set screw for GU handle sets. M5 x 6 Set Screw. Sold each.......see more
GU lever set screw for GU handle sets. M5 x 6 Set Screw. Sold each.…
GU Handle with Key 854-10432
GU Interior Dirigent Tilt and Turn handle with keylock 6-28075-00-0-11. Color: Silver. No Spind......see more
GU Interior Dirigent Tilt and Turn handle with keylock 6-28075-00-0-11. Color: Silver. No Spindle included.
The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
This Handle is designed for Wood, PVC and Aluminum windows also used on some balcony doors.
***Special order, non-returnable. Allow 3 to 4 weeks for shipping.
Spindles available in different sizes:
7mm x 70mm - 854-12758
7mm x 118mm - 854-12759
7mm x 131mm - 854-12760
7mm x 143mm - 854-12761…
GU Handle with Key 854-10434
GU Interior dirigent handle with keylock 6-28075-00-0-7. Color: White. No Spindle included. The......see more
GU Interior dirigent handle with keylock 6-28075-00-0-7. Color: White. No Spindle included. The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
This Handle is designed for Wood, PVC and Aluminum windows and balcony door.
***Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Handle with Key 854-15679
GU Interior dirigent handle with keylock 6-28075-33-0-5. Color: Dark Brown. Includes 33mm(1.29"......see more
GU Interior dirigent handle with keylock 6-28075-33-0-5. Color: Dark Brown. Includes 33mm(1.29") spindle.
The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
***Not always in stock, may take 3 to 4 weeks to ship. Special order, non-returnable. …
GU Handle with Key 854-16822
GU Interior dirigent handle with keylock 6-28075-38-0-11. Color: Silver. Includes 38mm(1.50") s......see more
GU Interior dirigent handle with keylock 6-28075-38-0-11. Color: Silver. Includes 38mm(1.50") spindle. G-U tilt and turn Uni-Jet handle.
The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
This handle is designed for Wood, PVC and Aluminum windows and balcony door.
***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Handle with Keylock 854-10433
GU Interior tilt and turn dirigent handle with keylock 6-28075-00-0-5. Color: Dark Bronze. No Spindl......see more
GU Interior tilt and turn dirigent handle with keylock 6-28075-00-0-5. Color: Dark Bronze. No Spindle included. The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design.
This handle is designed for Wood, PVC and Aluminum windows also used on some balcony doors.
***Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Hinge Pin Socket 854-16195
G-U Uni-Jet D drill in hinge pin socket without brake. Lower door hinge pin socket. Pin Length: 23mm......see more
G-U Uni-Jet D drill in hinge pin socket without brake. Lower door hinge pin socket. Pin Length: 23mm. Ferguard Finish. Uni-Jet sash hinge 6-36180-01-0-1. Corner frame pin socket for PVC tilt-and-turn windows and French doors. ***Special order, non-returnable. Allow 4 to 6 weeks to ship. Used with 854-16196…
GU Inactive Cremona 30/92 Gear Shootbolt 854-16910
GU Cremona 1.187" (30/92) Backset In Active Gear with Shootbolt
GU Inactive 2 point&nbs......see more
GU Cremona 1.187" (30/92) Backset In Active Gear with Shootbolt
GU Inactive 2 point lock. NO latch or deadbolt. This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-16910
30/92 8-16-889-1900 US FG
30mm
(1.187)
16mm
(0.62)
889mm
(35.00)
N/A
Silver
…
GU Inactive Cremona 35/92 Gear Shootbolt 854-10904
GU Cremona 1.38" (35/92) Backset InActive Lock Gear with Shootbolt
GU Inactive 2 point multi......see more
GU Cremona 1.38" (35/92) Backset InActive Lock Gear with Shootbolt
GU Inactive 2 point multipoint door lock for inactive doors. NO latch or deadbolt. This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412. Installation Screws: 854-11101.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-10904
35/92 8-16-889-1900 US FG
45mm
(1.75)
16mm
(0.62)
889mm
(35.00)
N/A
Silver
…
GU Inactive Cremona 45/92 Gear Shootbolt 854-12538
GU Cremona 1.75" (45/92) Backset InActive Gear with Shootbolt
GU Inactive 2 point ......see more
GU Cremona 1.75" (45/92) Backset InActive Gear with Shootbolt
GU Inactive 2 point lock. NO latch or deadbolt. This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412. Installation Screws: 854-11101.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-12538
45/92 8-16-889-1900 US FG
45mm
(1.75)
16mm
(0.62)
889mm
(35.00)
N/A
Silver
…
GU Inactive Cremona 50/92 Gear Shootbolt 854-10905
GU Cremona 2.00" (50/92) Backset InActive Gear with Shootbolt
GU Inactive 2 point ......see more
GU Cremona 2.00" (50/92) Backset InActive Gear with Shootbolt
GU Inactive 2 point lock. NO latch or deadbolt. This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412. Installation Screws: 854-11101.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-10905
50/92 8-16-889-1900 US FG
50mm
(2.00)
16mm
(0.62)
889mm
(35.00)
N/A
Silver
…
GU Inactive Cremona 55/92 Gear Shootbolt 854-12541
GU Cremona 2.187" (55/92) Backset In-Active Gear with Shootbolt
GU Inactive 2 point&nbs......see more
GU Cremona 2.187" (55/92) Backset In-Active Gear with Shootbolt
GU Inactive 2 point lock. NO latch or deadbolt. This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412. Installation Screws: 854-11101.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
***Special order, non-returnable. Allow 3 to 4 weeks to ship.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-12541
55/92 8-16-889-1900 US FG
55mm
(2.187)
16mm
(0.62)
889mm
(35.00)
N/A
Silver
…
GU Inactive Europa 55/92 Shootbolt Lock 854-12597
GU Europa In-Active Lock Gear with 2.187" (55/92) Backset, Adjustable Handle Height
GU Inact......see more
GU Europa In-Active Lock Gear with 2.187" (55/92) Backset, Adjustable Handle Height
GU Inactive 2 point door lock. NO latch or deadbolt. The Europa is a 3 piece lock that allows an adjustable handle height ranging from 35" to 41.34". This is the middle section of the lock with the gear and faceplate. Top and Bottom shootbolt sold separately. Bottom Shootbolt 854-14549 sold separately. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412. Installation Screws: 854-11101.
Manual version engages multipoint when door handle is lifted.
Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door. Features a 90 degree locking mechanism that uses a stanard American style cylinder.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
***Not always in stock, may take 3 to 4 weeks to ship. Non-returnable.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
Faceplate
Width
854-12597
55/92 8-16-ADJ-1830 US FG
55mm
(2.187)
16mm
(0.62)
889 - 1050mm
(35.00 - 41.34")
Top: 250mm
Bottom: 250mm
Silver
16mm
…
GU L&S Bogie Support 854-16856
GU tilt and slide bogie support GU-934. The L&S bogie supports can be used to ensure there is no......see more
GU tilt and slide bogie support GU-934. The L&S bogie supports can be used to ensure there is no load whatsoever on the rollers of the bogies when the sliding sash is lowered and its total weight is transmitted to the threshold via the roller track. Recommended for sliding sashes that are used infrequently. GU part #K-17455-03-0-0 ***Special order, non-returnable. Allow 6 to 12 weeks for shipping.…
GU Latch and Deadbolt Strike Plate 854-15544
G-U door lock latch and deadbolt strike for 2-1/4" thick doors. Stainless Steel finish. Non Han......see more
G-U door lock latch and deadbolt strike for 2-1/4" thick doors. Stainless Steel finish. Non Handed. Clear protective film. #8 x 5/8" flat head, phillips screws included.…
GU Latch and Deadbolt Strike Plate Black 854-15553
G-U door lock latch and deadbolt strike for 2-1/4" thick doors. Black finish. Non Handed. Clear......see more
G-U door lock latch and deadbolt strike for 2-1/4" thick doors. Black finish. Non Handed. Clear protective film. #8 x 5/8" flat head, phillips screws included.…
GU Latch and Deadbolt Strike Plate Black 854-16298
G-U door lock latch and deadbolt strike for 3" thick doors. Black Powder Coat finish. Non Hande......see more
G-U door lock latch and deadbolt strike for 3" thick doors. Black Powder Coat finish. Non Handed. Clear protective film. #8 x 5/8" flat head, phillips screws included. G-U Strike 9-C4717-59-0-6. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Latch and Deadbolt Strike Plate Dark Bronze 854-15585
G-U door lock latch and deadbolt strike for 2-1/4" thick doors. Dark Bronze Powder Coat finish.......see more
G-U door lock latch and deadbolt strike for 2-1/4" thick doors. Dark Bronze Powder Coat finish. Non Handed. Clear protective film. #8 x 5/8" flat head, phillips screws included. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Latch and Deadbolt Strike Plate Raised 854-16711
GU Secury latch and deadbolt strike plate. 1/4" Raised. Non-handed. GU Strike: 6-38733-01-0-1. ......see more
GU Secury latch and deadbolt strike plate. 1/4" Raised. Non-handed. GU Strike: 6-38733-01-0-1. This strike plate replaces discontinued GU strike 6-28959-00-0-1. New style is slightly shorter. Markings: 949836 in Metal & 9 7735 01 0 black plastic ends & 9-37827-01 Black Middle Support.
Notes:
-The new length of the GU latch & deadbolt striker of L = 216.5 mm (as compared to the previous length of L = 227 mm without moldings) is obtained in the UPPER area of the latch & deadbolt striker.
-The upper fixing hole was shifted downwards by 10.5 mm.
-The current deadbolt cutout of W x H = 12 x 43 mm of latch & deadbolt strikers is changed to W x H = 12.25 x 62 mm.
Non-returnable.…
GU Latch and Deadbolt Strike Plate Stainless Steel 854-16974
G-U door lock latch and deadbolt strike for 3" thick doors. Stainless Steel finish. Non Handed.......see more
G-U door lock latch and deadbolt strike for 3" thick doors. Stainless Steel finish. Non Handed. #8 x 5/8" flat head, phillips screws included. 9-C4717-59-0-8B…
GU Lever Operated Gear 854-16905
G-U Lever Operated Gear with lower shootbot for GU In Active door. Length: 2190mm. Lever Height: 516......see more
G-U Lever Operated Gear with lower shootbot for GU In Active door. Length: 2190mm. Lever Height: 516mm. GU Lever Operated Gear 6-32606-08. Euro-groove 7/8 x 4mm. SRH: 2101- 2350mm. Used on G-U Uni-Jet fold and slide system.
The Euro-groove 7/8 x 4 mm lever-operated gear is used with 2-sashed windows or balcony doors in the Euro-groove 7/8 x 4 mm of the dummy mullion
sash on the opposite side. A Tilt & Turn drive gear with fixed or variable handle height can be installed in the active sash.
Top Shootbolt: 854-16906 (sold separately).
***Special order, non-returnable. Allow 8 to 10 weeks to ship.…
GU Lift & Slide Center Runners 854-16963
G-U Lift and Slide door additional center runners in Ferguard finish. Center runner bogies for the G......see more
G-U Lift and Slide door additional center runners in Ferguard finish. Center runner bogies for the GU-937 lift and slide hardware system. G-U Lift and Slide Runners K-17759-01-0-1. For sash weights up to 300 kg (661 lbs). Minimum sash width 1290mm, respectively 1270 mm depending on the profile. The fitting parts are made of high quality steel, zinc die-casting and aluminum alloys. These runners are in the standard FerGUard finish. Includes 2 central bogies. ***Special order, non-returnable. Will take 4 to 6 weeks to ship.…
GU Lift & Slide Locking Bolt 854-12751
GU Lift and Slide Locking Bolt for Lift Lock Gear. Used on GU Lift and slide doors. GU Par......see more
GU Lift and Slide Locking Bolt for Lift Lock Gear. Used on GU Lift and slide doors. GU Part: 9-26072-00-0-1. Total Length: 2-3/4" long. Priced and Sold individually 1 each. ***Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Lift & Slide Runners 854-14975
G-U Lift and Slide door rollers. Bottom and Front runners for the GU-934 / 954 lift and slide hardwa......see more
G-U Lift and Slide door rollers. Bottom and Front runners for the GU-934 / 954 lift and slide hardware system. G-U Lift and Slide Runners K-16488-00-0-18.
Markings on rollers: 9-39334-00 and 9-39337-00. 3101041.
The fitting parts are made of high quality steel, zinc die-casting and aluminum alloys. As an additional level of protection, these runners are in a FaceGUard finish.
***Special order, non-returnable. Will take around 4 weeks to ship.…
GU Lift & Slide Runners 854-14976
G-U Lift and Slide door rollers in Ferguard finish. Bottom and Front runners for the GU-937/957 lift......see more
G-U Lift and Slide door rollers in Ferguard finish. Bottom and Front runners for the GU-937/957 lift and slide hardware system. G-U Lift and Slide Runners K-16493-00-0-1. The fitting parts are made of high quality steel, zinc die-casting and aluminum alloys. These runners are in the standard FerGUard finish. ***Special order, non-returnable. Will take 4 to 6 weeks to ship.…
GU Lift and Slide Handle 854-14779
GU Lift and slide handle assembly. Color: Dark bronze. 240mm handle length. G-U handle K-13265-00-0-......see more
GU Lift and slide handle assembly. Color: Dark bronze. 240mm handle length. G-U handle K-13265-00-0-5. G-U dirigent turn handle set with exterior flush pull. Includes interior dirigent turn handle without PC hole and exterior flush pull. GU-934/937 Dirigent handle without PC hole. Sash thickness up to 65mm. ***Special order, non-returnable. Allow around 4 weeks to ship.…
GU Lift and Slide Handle 854-14785
GU Lift and slide handle assembly. Color: White. 240mm handle length. G-U handle K-13267-00-0-7. G-U......see more
GU Lift and slide handle assembly. Color: White. 240mm handle length. G-U handle K-13267-00-0-7. G-U dirigent turn handle set with both sides having a PC hole. Includes interior and exterior handle set with PC hole, two countersunk screws M6 x 100 and square spindle. GU-934/937 Dirigent handle with PC hole. Sash thickness up to 90mm, adjustable spindle length. ***Special order, non-returnable. Allow around 6 to 8 weeks to ship.…
GU Lift and Slide Handle 854-15011
GU Lift and Slide handle assembly in Stainless Steel. 240mm handle length. G-U handle K-16793-00-0-8......see more
GU Lift and Slide handle assembly in Stainless Steel. 240mm handle length. G-U handle K-16793-00-0-8. Inside G-U dirigent turn handle set without PC hole. Includes interior turn handle and exterior flush pull, and spindle. GU-934/937 Dirigent handle without PC hole. Sash thickness up to 80mm, adjustable spindle length. ***Special order, non-returnable. Allow around 4 to 6 weeks to ship.…
GU Lift and Slide Handle Inside 854-10153
G-U Lift and Slide Dirigent handle without hole for key cylinder. Color: Dark Bronze. Interior Handl......see more
G-U Lift and Slide Dirigent handle without hole for key cylinder. Color: Dark Bronze. Interior Handle and Pull only. GU Part: 6-24606-00-0-5 ***Special order, non-returnable. Allow 6 to 10 weeks to ship.…
GU Lift and Slide Handle LH 854-14754
GU Lift and slide handle assembly 34225. Color: Dark bronze. Left Hand. G-U handle K-12920-00-L-5.
......see more
GU Lift and slide handle assembly 34225. Color: Dark bronze. Left Hand. G-U handle K-12920-00-L-5.
Rotary handle for conductor, Left-hand side, GU PSK 966 976 mZ, with lockout protection, including installation instructions! For parallel sliding tilt doors and windows made of wood and plastic.
DIN Left : ELEMENT opens from left to right (from the inside).
Designation on base body: GU-34225 , No. GU-34225 is on the lever housing, on older levers the No. 30152. The gear inside the lever bears the number 33281.
***Special order, non-returnable. Allow around 4 weeks to ship.
Right Hand: 854-14756…
GU Lift and Slide Handle RH 854-14756
GU Lift and slide handle assembly 34225. Color: Dark bronze. Right Hand. G-U handle K-12920-00-R-5.
......see more
GU Lift and slide handle assembly 34225. Color: Dark bronze. Right Hand. G-U handle K-12920-00-R-5.
Rotary handle for conductor, Left-hand side, GU PSK 966 976 mZ, with lockout protection, including installation instructions! For parallel sliding tilt doors and windows made of wood and plastic.
DIN Right: ELEMENT opens from right to left (from the inside).
Designation on base body: GU-34225 , No. GU-34225 is on the lever housing, on older levers the No. 30152. The gear inside the lever bears the number 33281.
***Special order, non-returnable. Allow around 4 weeks to ship.
Left Hand: 854-14754…
GU Lift and Slide Inside Handle 854-10152
G-U Lift and Slide Dirigent handle without hole for key cylinder. Color: Silver. Interior Handle and......see more
G-U Lift and Slide Dirigent handle without hole for key cylinder. Color: Silver. Interior Handle and Pull only. GU Part: 6-24606-00-0-1. Handle Markings: 9-29519; 6432. ***Special order, non-returnable. Allow 6 to 10 weeks to ship.…
GU Lift and Slide Interior Cover Plate 854-13021
G-U Lift and slide interior handle cover pate with cylinder hole. Color: Silver. Use with G-U lift a......see more
G-U Lift and slide interior handle cover pate with cylinder hole. Color: Silver. Use with G-U lift and slide handle. GU Cover 9-37909-02-0-1. **Special order, non-returnable. Allow 6-8 weeks to ship.…
GU Lift and Slide Locking Gear 854-10619
GU 934 Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 2115mm - 2765mm. H......see more
GU 934 Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 2115mm - 2765mm. Handle Height: 1010mm. Faceplate finish: Dark Bronze. G-U Lock 6-30021-28-0-5. G-U 934 Hardware, Sash Thickness 56-68mm.
***Special order, non-returnable. Allow 4 to 8 weeks for shipping.
Note: Due to the length of this lock, there will be additional shipping charges.…
GU Lift Locking Gear 854-10606
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 865mm - 1285mm. Han......see more
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 865mm - 1285mm. Handle Height: 410mm. Faceplate finish: Dark Bronze. GU lift locking gear 6-30019-11-0-5. GU 937 Lift and Slide Door Hardware for profile cylinder. Sash Thickness 56-68mm. A replacement for GU 936 but you must also change the runners and the connecting rod. ***Special order, non-returnable. Allow around 6 to 8 weeks for shipping.…
GU Lift Locking Gear 854-10608
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 1865mm - 2365mm. Ha......see more
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 1865mm - 2365mm. Handle Height: 1010mm. Faceplate finish: Silver. GU lock 6-30019-24-0-1. GU 937 Lift and Slide Door Hardware for profile cylinder. Sash Thickness 56-68mm. A replacement for GU 936 but you must also change the runners and the connecting rod. ***Special order, non-returnable. Allow around 6 to 8 weeks for shipping.…
GU Lift Locking Gear 854-10609
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 1865mm - 2365mm. Ha......see more
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 1865mm - 2365mm. Handle Height: 1010mm. Faceplate finish: Dark Bronze. GU lock 6-30019-24-0-5. GU 937 Lift and Slide Door Hardware for profile cylinder. Sash Thickness 56-68mm. A replacement for GU 936 but you must also change the runners and the connecting rod. ***Special order, non-returnable. Allow around 6 to 8 weeks for shipping.…
GU Lift Locking Gear 854-10616
GU Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 1865mm - 2365mm. Handl......see more
GU Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 1865mm - 2365mm. Handle Height: 1010mm. Faceplate finish: Silver. GU part #6-30021-24-0-1. GU 934 Hardware, Sash Thickness 56-68mm. ***Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Lift Locking Gear 854-10617
GU Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 1865mm - 2365mm. Handl......see more
GU Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 1865mm - 2365mm. Handle Height: 1010mm. Faceplate finish: Dark Bronze. GU part #6-30021-24-0-5. GU 934 Hardware, Sash Thickness 56-68mm. ***Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Lift Locking Gear 854-16955
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 865mm - 1285mm. Han......see more
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 865mm - 1285mm. Handle Height: 410mm. Faceplate finish: Silver. GU lift locking gear 6-30019-11-0-1. GU 937 Lift and Slide Door Hardware for profile cylinder. Sash Thickness 56-68mm. A replacement for GU 936 but you must also change the runners and the connecting rod. ***Special order, non-returnable. Allow around 6 to 8 weeks for shipping.…
GU Lock Strike Plate Left Hand 854-16202
G-U multipoint door lock latch and deadbolt strike plate. Left Hand. GU Strike 6-38678-09-L-FG. ......see more
G-U multipoint door lock latch and deadbolt strike plate. Left Hand. GU Strike 6-38678-09-L-FG. ***Special order, non-returnable. Allow 3-4 weeks to ship. Right Hand Strike: 854-16203…
GU Lock Strike Plate Pack 854-15532
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Color: Dark Bronze. Non-Hand......see more
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Color: Dark Bronze. Non-Handed. Use with Secury Automatic Door Locks. Includes middle keeper, 1 top and 1 bottom keeper. 6 screws included.…
GU Lock Strike Plate Pack 854-15683
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Color: Polished Brass. Non-H......see more
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Color: Polished Brass. Non-Handed. Use with Secury Automatic Door Locks. Includes middle keeper, 1 top and 1 bottom keeper. 6 screws included. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Lock Strike Plate Pack 854-15686
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Stainless Steel Finish. Non-......see more
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Stainless Steel Finish. Non-Handed. Use with Secury Automatic Door Locks. Includes middle keeper, 1 top and 1 bottom keeper. 6 screws included. K-C4774-45-0-11 ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Lock Strike Plate Pack Black 854-15691
G-U multipoint door lock strike plate pack for 2-1/4" thick doors. Color: Black. Non-Handed. Us......see more
G-U multipoint door lock strike plate pack for 2-1/4" thick doors. Color: Black. Non-Handed. Use with Secury Automatic Door Locks. Includes middle keeper, 1 top and 1 bottom keeper. 6 screws included. K-C4775-57-0-6. **Non-returnable. Not always in stock, may take 3 to 4 weeks to ship.…
GU Lock Strike Plate Right Hand 854-16203
G-U multipoint door lock latch and deadbolt strike plate. Right Hand. GU Strike 6-38678-09-R-FG.&nbs......see more
G-U multipoint door lock latch and deadbolt strike plate. Right Hand. GU Strike 6-38678-09-R-FG. ***Special order, non-returnable. Allow 3-4 weeks to ship. Left Hand Strike: 854-16202…
GU Locking Block 854-14761
GU locking block with key. Turn blocker. Color: White. Used on Tilt and Turn windows. GU/ ......see more
GU locking block with key. Turn blocker. Color: White. Used on Tilt and Turn windows. GU/ Ferco part number K-12968-00-0-7.
Special order, non-returnable. Allow 4 weeks shipping.…
GU Locking Bolts 854-15607
GU Lift and Slide Bag of Locking Bolts 2/14 for Lift Lock Gear. Includes 2 bolts, 2 plates and 4 scr......see more
GU Lift and Slide Bag of Locking Bolts 2/14 for Lift Lock Gear. Includes 2 bolts, 2 plates and 4 screws. Used on GU Lift and slide doors. GU Part: K-10563-00-0-8. ***Special order, allow 3 to 4 weeks for shipping.…
GU LOG Support Plate 854-16907
G-U lever operated gear shootbolt support plate guide. GU LOG Shootbolt Guide 9-36996-00-0-1. Plate ......see more
G-U lever operated gear shootbolt support plate guide. GU LOG Shootbolt Guide 9-36996-00-0-1. Plate for stabilizing the faceplate rod in the upper area. Euro-groove 7/8 x 4mm. Used on GU Uni-Jet fold and slide lock system. ***Special order, non-returnable. Allow 4 to 6 weeks to ship.…
GU Lower Drill In Door Hinge 854-16196
G-U pivot rest and drill in door hinge. Lower door hinge. Uni-Jet sash hinge 6-36882-22-0-1. Pin Len......see more
G-U pivot rest and drill in door hinge. Lower door hinge. Uni-Jet sash hinge 6-36882-22-0-1. Pin Length: 22mm. Corner hinge support for PVC tilt-and-turn windows and French doors. ***Special order, non-returnable. Allow 4 to 6 weeks to ship.…
GU Middle Keeper 854-15524
GU polished brass middle keeper for 45 mm 1 3/4" thick door.. Non Handed. Clear protective film. #8 ......see more
GU polished brass middle keeper for 45 mm 1 3/4" thick door.. Non Handed. Clear protective film. #8 x 5/8" flat head, philips screws included.…
GU Mishandling Device 854-10714
GU tilt and turn mishandling device. Wrong operation safety device. G-U 9-40462-10.
Markings: ......see more
GU tilt and turn mishandling device. Wrong operation safety device. G-U 9-40462-10.
Markings: 9-40497
***Special order, non-returnable. Allow around 4 weeks to ship.…
GU Monobloc Dirigent Handle Set 854-16166
G-U 28/98 Monobloc T/S Manilla Active door handle set. Color: Silver. Square style backplate. 92mm H......see more
G-U 28/98 Monobloc T/S Manilla Active door handle set. Color: Silver. Square style backplate. 92mm Handle PZ. 8mm Spindle. Monobloc narrow frame set with Dirigent handle. No key cylinder included. Monobloc Manilla Handle H-01215-45-0-1. ***Special order, non-returnable. Allow 4 to 6 weeks to ship.…
GU Reversing Gear 854-10886
GU shootbolt top Reversing gear, Stainless steel finish. 160mm 6.29921 inches 854-10886. GU Reversin......see more
GU shootbolt top Reversing gear, Stainless steel finish. 160mm 6.29921 inches 854-10886. GU Reversing Gear 6-33085-00-0-8.…
GU Reversing Gear 854-12620
GU shootbolt Reversing gear 150mm 5.91 inches 854-12620. GU part number: 8-00670-00-0-1......see more
GU shootbolt Reversing gear 150mm 5.91 inches 854-12620. GU part number: 8-00670-00-0-1…
GU Reversing Gear 854-14426
GU shootbolt reversing gear. Silver finish. Length: 160mm (6.29"). Top shootbolt used with GU m......see more
GU shootbolt reversing gear. Silver finish. Length: 160mm (6.29"). Top shootbolt used with GU multipoint door locks. Stamped 16798 and E16744. G-U G-16798-00-0-1.…
GU Reversing Gear 854-14431
GU top shootbolt reversing gear, Stainless steel finish. 160mm 6.29921 inches 854-14431. GU Reversin......see more
GU top shootbolt reversing gear, Stainless steel finish. 160mm 6.29921 inches 854-14431. GU Reversing Gear G-16798-00-0-8.…
GU Rhino Lock Top Extension 854-16152
GU Rhino door lock extension with hook lock point. Length: 650mm (25.59"). Finish: Silver. GU P......see more
GU Rhino door lock extension with hook lock point. Length: 650mm (25.59"). Finish: Silver. GU Part G-18821-00-0-1.…
GU Rhinobolt Hook Door Lock 854-12375
GU Rhinobolt Hook Door Lock 1.38" (35/92) Backset, Manual Gear.
This is the gear with t......see more
GU Rhinobolt Hook Door Lock 1.38" (35/92) Backset, Manual Gear.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Optionial extension availabe for taller doors, please contact us.
Total Length of this lock: 89.96" (2285mm). This lock uses a European Profile Cylinder.
Manual version engages multipoint when door handle is lifted.
3- Point locking system features tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reveresed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Not always in stock, may take 3 to 4 weeks to ship. Non-returnable.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Rhino Hook Lock, 5/8" Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-12375
35/92 8-16-1050-2285 PZ FG
GU Lock: 6-UA400-35-1-1
35mm
(1.38)
16mm
(0.62)
Adjustable:
W/O Shoots: 785mm - 1050mm
W/ Shoots: 995mm - 1145mm
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU Rhinobolt Hook Door Lock 854-12382
GU Rhinobolt Hook Multipoint Door Lock 2.17" (55/92) Backset, Manual Gear.
This is the ......see more
GU Rhinobolt Hook Multipoint Door Lock 2.17" (55/92) Backset, Manual Gear.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Optional extension available for taller doors, please contact us.
Total Length of this lock: 89.96" (2285mm). Uses American style cylinder with tailpiece.
Manual version engages multipoint when door handle is lifted.
3- Point locking system features tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reversed.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-12382
A-S 55/92 8-16-1050-2285 US FG
GU Lock: 6-UA400-55-0-1
55mm
(2.17)
16mm
(0.62)
889mm (35") Standard,
Adjustable up to 1041mm (41" with extensions)
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU Rhinobolt Hook Lock 854-10853
GU Rhinobolt Hook Lock 2.187" (55/92) Backset, Manual Gear.
This is the gear with the b......see more
GU Rhinobolt Hook Lock 2.187" (55/92) Backset, Manual Gear.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Optionial extension availabe for taller doors, please contact us.
Total Length of this lock: 89.96" (2285mm). This lock uses a European Profile Cylinder.
Manual version engages multipoint when door handle is lifted.
3- Point locking system features tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reveresed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Not always in stock, may take 3 to 4 weeks to ship. Non-returnable.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Rhino Hook Lock, 5/8" Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-10853
55/92 8-16-1050-2285 US FG
GU Lock: 6-32486-04-0-1
55mm
(2.187)
16mm
(0.62)
Adjustable:
W/O Shoots: 785mm - 1050mm
W/ Shoots: 995mm - 1145mm
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU Rhinobolt Hook Lock 854-10930
GU Rhinobolt Hook Lock 1.38" (35/92) Backset, Manual Gear.
This is the gear with the bo......see more
GU Rhinobolt Hook Lock 1.38" (35/92) Backset, Manual Gear.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Optionial extension availabe for taller doors, please contact us.
Total Length of this lock: 89.96" (2285mm).
Manual version engages multipoint when door handle is lifted.
3- Point locking system featurer tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reveresed.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Not always in stock. May take around 4 weeks to ship.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-10930
35/92 8-16-1050-2285 US FG
GU Lock: 6-33400-01-0-1
35mm
(1.38)
16mm
(0.62)
Adjustable
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU Rhinobolt Hook Lock 854-12380
GU Multipoint Door Lock with Rhinobolt Hooks. 2" (50/92) Backset, Manual Lock Gear.
This is ......see more
GU Multipoint Door Lock with Rhinobolt Hooks. 2" (50/92) Backset, Manual Lock Gear.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Optional extension available for taller doors, please contact us.
Total Length of this lock: 89.96" (2285mm).
Manual version engages multipoint when door handle is lifted.
3- Point locking system features tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reversed.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Not always in stock. May take around 3-4 weeks to ship.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-12380
50/92 8-16-1050-2285 US FG
GU Lock: 6-33400-
35mm
(1.38)
16mm
(0.62)
Adjustable
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU Rhinobolt Hook Lock 854-16902
GU Rhinobolt Hook Door Lock 2.375" (60/92) Backset, Manual Gear. Uses Euro profile cylinde......see more
GU Rhinobolt Hook Door Lock 2.375" (60/92) Backset, Manual Gear. Uses Euro profile cylinder.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Extension without lock point availabe for taller doors 854-12610, sold separately.
Total Length of this lock: 89.96" (2285mm). This lock uses a European Profile Cylinder.
Manual version engages multipoint when door handle is lifted.
3-Point locking system features tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reveresed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Special order, non-returnable. Allow around 3 to 4 weeks to ship.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Rhino Hook Lock, 5/8" Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-16902
60/92 8-16-1050-2285 PZ FG
GU Lock: 6-UA400-60-1-1
60mm
(2.375)
16mm
(0.62)
Adjustable:
W/O Shoots: 785mm - 1050mm
W/ Shoots: 995mm - 1145mm
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU RhinoShoot Hook Shootbolt Lock 854-12391
GU RhinoShoot Hook and Shootbolt Lock 2.00" (50/92) Backset, Manual Gear. Active Door Lock......see more
GU RhinoShoot Hook and Shootbolt Lock 2.00" (50/92) Backset, Manual Gear. Active Door Lock
This is the Active gear with the bottom shootbolt, bottom rhino hook and top rhino hook. Top Shootbolt 854-14431 sold separately. Extension for doors taller than 81", 854-14417 sold separately. Installation Screws 854-11103.
Manual version engages multipoint when door handle is lifted.
The Rhino-shoot 5-point locking system features shoot bolts, top and bottom, two tempered steel “horns” which lock in an upward direction providing maximum security and protection against warping of the door panels. Also featured is our 90 degree locking mechanism that incorporates a standard US cylinder. Heavy duty mortise construction with reinforced lever return spring system. Top and bottom shoot bolts, two steel “horns”, deadbolt and latch.Latch is non-handed and can be reveresed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Not always in stock. May take around 4 weeks to ship.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Multipoint Lock with 16mm Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-12391
A+S 50/92 8-16-889-1900-US-SS
GU Lock: 6-UA416-50-0-8
50mm
(2.00)
16mm
(0.62)
889mm
(35.00)
568mm
(22.375)
659mm
(25.94)
NA
Stainless
Steel
…
GU RhinoShoot Hook Shootbolt Lock 854-12392
GU RhinoShoot Hook and Shootbolt Lock 2.00" (50/92) Backset, Manual Gear. Active Door Lock......see more
GU RhinoShoot Hook and Shootbolt Lock 2.00" (50/92) Backset, Manual Gear. Active Door Lock, Euro Profile Cylinder
This is the Active gear with the bottom shootbolt, bottom rhino hook and top rhino hook. Top Shootbolt 854-14431 sold separately. Extension for doors taller than 81", 854-14417 sold separately. Installation Screws 854-11103.
This lock uses a European profile cylinder.
Manual version engages multipoint when door handle is lifted.
The Rhino-shoot 5-point locking system features shoot bolts, top and bottom, two tempered steel “horns” which lock in an upward direction providing maximum security and protection against warping of the door panels. Also featured is our 90 degree locking mechanism that incorporates a standard US cylinder. Heavy duty mortise construction with reinforced lever return spring system. Top and bottom shoot bolts, two steel “horns”, deadbolt and latch.Latch is non-handed and can be reveresed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Special order, non-returnable. Allow around 4 weeks to ship.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Multipoint Lock with 16mm Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-12391
A+S 50/92 8-16-889-1900-US-SS
50mm
(2.00)
16mm
(0.62)
889mm
(35.00)
568mm
(22.375)
659mm
(25.94)
NA
Stainless
Steel
…
GU Roma Handle Set for Tedee Smart Lock 854-17004B
GU Roma Active Swing Door Handle set for Tedee smart lock. Color: Black. Includes interior and ......see more
GU Roma Active Swing Door Handle set for Tedee smart lock. Color: Black. Includes interior and exterior backplate and two levers for Smart lock system. Can be used on 1-3/4" or 2-1/4" thick doors. Zamac trim set. G-U handle K-U9092-T1-0-6. Tedee Pro Smart lock sold separately 854-16937. Optional Black Exterior Keypad sold separately: 854-16987 and Smart Bridge 854-16938 also sold separately. For door locks that use and American style cylinder. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Roma Semi-Active Handle Set 854-16980
GU Roma Semi-Active door handle set. Color: Black. Includes interior and exterior backplate and......see more
GU Roma Semi-Active door handle set. Color: Black. Includes interior and exterior backplate and two levers. Can be used on 1-3/4" or 2-1/4" thick doors.
Semi-Active handles have movable levers with an interior thumbturn only. Zamac trim set. G-U handle K-U9046-Z0-0-6.
***Special order, non-returnable. May take 3 to 4 weeks to ship.…
GU Secury Auto 35/92 Active Lock Gear Only 854-16383
GU Secury Automatic Europa Multipoint Door Lock Gear Only with 1.38" (35/92) Backset. Automatic......see more
GU Secury Automatic Europa Multipoint Door Lock Gear Only with 1.38" (35/92) Backset. Automatic Lock Gear K-20044-DF-0-1 / 6-28473-01-0-1. This is the gear only. No faceplates included. Lock uses European style cylinder. Automatic version engages multipoint when door is closed. Markings on Gearbox: 9-34255-01 35/92. Or 6-28473-01-0-1 D. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Secury Europa Active Lock Gear 854-16157
GU Secury Europa 900mm Active multipoint lock gear with 35mm backset. Lock uses European profile cyl......see more
GU Secury Europa 900mm Active multipoint lock gear with 35mm backset. Lock uses European profile cylinder. G-U lock: 6-C4901-35-0-8B.
This is the 35mm active gearbox with the faceplate. Upper and lower extensions sold separately.
Overall Length of Faceplate: 900mm (35.43")
Backset: 35mm (1.38")
Faceplate Width: 16mm (5/8")
Handle to Cylinder: 3-5/8"
NOTE: If your gearbox does not have a deadbolt, please contact us before ordering.
***Special order, non-returnable. Allow 3 to 4 weeks for shipping.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
GU Secury Europa Active Lock Gear 854-16279
G-U Secury Europa Active Multipoint door lock with 50mm backset. Uses European profile cylinder. GU ......see more
G-U Secury Europa Active Multipoint door lock with 50mm backset. Uses European profile cylinder. GU Lock: 6-33480-01-0-8B / SECURY-EUROPA 50/92 PZ R0 AC AD T&B 900m.
Replaces G-U Secury lock 6-C4901-50-0-8B.
Total Length: 35.43" (900mm).
Backset: 2" (50mm).
Faceplate Width: 5/8" (16mm).
This is the 50mm active gearbox with the faceplate. Upper and lower extensions sold separately.
***Special order, allow 3 to 4 weeks for shipping. Non-returnable.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
GU Secury Europa Active Lock Gear 854-16688
GU Secury Europa 900mm Active multipoint lock gear with 50mm backset. Lock uses European profile cyl......see more
GU Secury Europa 900mm Active multipoint lock gear with 50mm backset. Lock uses European profile cylinder. G-U lock: 6-C4901-50-0-8B.
Markings: 6-30005-AT-0-0 C Europa 50-92-8.
This is the 50mm active gearbox with the faceplate. Upper and lower extensions sold separately.
Overall Length of Faceplate: 900mm (35.43")
Backset: 50mm (2.00")
Faceplate Width: 16mm (5/8")
Handle to Cylinder: 3-5/8"
NOTE: If your gearbox does not have a deadbolt, please contact us before ordering.
***Special order, non-returnable. Allow 3 to 4 weeks for shipping.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
GU Secury Europa Active Lock Gear 854-16868
G-U Secury Europa Active Multipoint door lock with 55mm backset. Uses European profile cylinder. GU ......see more
G-U Secury Europa Active Multipoint door lock with 55mm backset. Uses European profile cylinder. GU Lock:6-C4901-55-0-8B. / SECURY-EUROPA 55/92 PZ R0 AC AD T&B 900m.
Total Length: 35.43" (900mm).
Backset: 2.16" (55mm).
Faceplate Width: 5/8" (16mm).
This is the 55mm active gearbox with the faceplate. Upper and lower extensions sold separately.
***Special order, allow 3 to 4 weeks for shipping. Non-returnable.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
GU Secury Europa Active Lock Gear 854-16944
GU Secury Europa 900mm Active multipoint lock gear with 60mm backset. Lock uses European profile cyl......see more
GU Secury Europa 900mm Active multipoint lock gear with 60mm backset. Lock uses European profile cylinder. G-U lock: 6-C4901-60-0-8B.
This is the 60mm active gearbox with the faceplate. Upper and lower extensions sold separately.
Overall Length of Faceplate: 900mm (35.43")
Backset: 60mm (2.38")
Faceplate Width: 16mm (5/8")
Handle to Cylinder: 3-5/8"
NOTE: If your gearbox does not have a deadbolt, please contact us before ordering.
***Special order, non-returnable. Allow 3 to 4 weeks for shipping.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
GU Secury R4 Europa 40/85 Active Door Lock Gear 854-16946
GU Secury R4 Active multipoint lock gear with 40mm backset. 85mm Handle to Cylinder PZ. Lock uses Eu......see more
GU Secury R4 Active multipoint lock gear with 40mm backset. 85mm Handle to Cylinder PZ. Lock uses European key cylinder. G-U door lock: 6-31998-03-0-1.
Overall Length of Faceplate: 2285mm (89.96") Lock is trimmable.
Backset: 40mm (1.562")
Handle Height: 1050mm (41.34")
Faceplate Width: 16mm (5/8")
Handle to Cylinder: 85mm (3.35")
Spindle Size: 8mm
Cylinder: European
Handle to Lower Roller Position 1: 402.5mm (15.85").
Handle to Lower Roller Position 2: 730mm (28.75").
Handle to Upper Roller Position 1: 267.5mm (10.53").
Handle to Upper Roller Position 2: 737.5mm (29.03").
***Special order, non-returnable. Allow around 4 weeks to ship.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
GU Secury S-Bolt Extension 854-16151
GU Secury S-bolt top extension with shootbolt for 72-3/4"(1846mm) to 82-1/2"(21......see more
GU Secury S-bolt top extension with shootbolt for 72-3/4"(1846mm) to 82-1/2"(2100mm) tall door. Extension Length: 825.5mm (32.5"). GU Extension: 6-39572-01-0-8B. Faceplate Width:16mm wide. Stainless steel faceplate finish. Shootbolt Projection: 1".
For use with G-U Secury S-Bolt systems only. Can be used on active or inactive doors.
***Special order, non-returnable. Allow 3 to 4 weeks for shipping.
Compatible Gear:
GU Secury 50/92 Shootbolt Active Lock 854-16843.…
GU Secury S-Bolt Extension 854-16210
GU Secury S-bolt top extension with shootbolt for 102-1/2"(2604mm) to 112-1/2"(2858mm) tal......see more
GU Secury S-bolt top extension with shootbolt for 102-1/2"(2604mm) to 112-1/2"(2858mm) tall door. Extension Length: 1587.5mm (61.5"). GU Extension: 6-39572-04-0-8B. Faceplate Width:16mm wide. Stainless steel faceplate finish. Shootbolt Projection: 1".
For use with G-U Secury S-Bolt systems only. Can be used on active or inactive doors.
***Special order, non-returnable. Allow 3 to 4 weeks for shipping.
Compatible Gear:
GU Secury 50/92 Shootbolt Active Lock 854-16843.…
GU Secury Shootbolt Active Lock 854-16843
GU Secury S-Bolt Active Multi Point lock with 50mm backset. Has cylinder hole that accepts a tail pi......see more
GU Secury S-Bolt Active Multi Point lock with 50mm backset. Has cylinder hole that accepts a tail piece. 36" handle height. GU part: Secury-Europa 50/92/8/16/914/1270. GU lock 6-39571-02-0-8B. This is a gear and bottom extension with shootbolt. Top shootbolt extension sold separatly. Special order, non-returnable. Allow 3 to 4 weeks for shipping. If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.…
GU Shootbolt Extension 56-552
GU top shootbolt extension for 56-511 (active) or 56-512 (passive) only with 20mm faceplate width. F......see more
GU top shootbolt extension for 56-511 (active) or 56-512 (passive) only with 20mm faceplate width. Finish: Yellow Dichromate(Brass Looking). Length: 500mm. 20mm Faceplate Width. 500mm extension trimmable down to 250mm. Used with old style G-U multipoint locks.…
GU Shootbolt Strike Plate 854-10207
GU Strike Plate for shootbolts. Used on double doors. G-U shootbolt locking plate 6-2......see more
GU Strike Plate for shootbolts. Used on double doors. G-U shootbolt locking plate 6-25375-00-0-1. Special order, non-returnable. Allow 3-4 weeks for them to ship.…
GU Sill Mounted Casement Operator 36-516LHBGM
GU Split Arm Casement Operator. Left Hand window operator. Rear mount. Color Beige. Used on Silverli......see more
GU Split Arm Casement Operator. Left Hand window operator. Rear mount. Color Beige. Used on Silverline windows. ***Original G-U operators had a plastic housing and a slight bend in the arm. Currently being replaced with metal die cast housing and stainless steel worm gear and straight arm. Replacement does not have bent arm.…
GU Sill Mounted Casement Operator 36-516LHbW
GU Split Arm Casement Operator. Left Hand window operator. Rear mount. Color: White. Used on Silverl......see more
GU Split Arm Casement Operator. Left Hand window operator. Rear mount. Color: White. Used on Silverline windows. ***Original G-U operators had a plastic housing and a slight bend in the arm. Currently being replaced with metal die cast housing and stainless steel worm gear and straight arm. Replacement does not have bent arm. Right Hand Operator: 36-516RHBW…
GU Sill Mounted Casement Operator 36-516RHBGM
GU Split Arm Casement Operator. Right Hand window operator. Rear mount. Color Beige. Used on Silverl......see more
GU Split Arm Casement Operator. Right Hand window operator. Rear mount. Color Beige. Used on Silverline windows. ***Original G-U operators had a plastic housing and a slight bend in the arm. Currently being replaced with metal die cast housing and stainless steel worm gear and straight arm. Replacement does not have bent arm.…
GU Sill Mounted Casement Operator 36-516RHbW
GU Split Arm Casement Operator. Right Hand window operator. Rear mount. Color: White. Used on Silver......see more
GU Split Arm Casement Operator. Right Hand window operator. Rear mount. Color: White. Used on Silverline windows. ***Original G-U operators had a plastic housing and a slight bend in the arm. Currently being replaced with metal die cast housing and stainless steel worm gear and straight arm. Replacement does not have bent arm. Left Hand Operator: 36-516LHBW…
GU Sill Mounted Casement Operator 36-516RHowM
GU Split Arm Casement Operator. Right Hand window operator. Rear mount. Color: Off-White. Used on Si......see more
GU Split Arm Casement Operator. Right Hand window operator. Rear mount. Color: Off-White. Used on Silverline windows. Handle not included. Handle sold separately. ***Original G-U operators had a plastic housing and a slight bend in the arm. Currently being replaced with metal die cast housing and stainless steel worm gear and straight arm. Replacement does not have bent arm.…
GU Single Point Door Lock 854-15488
GU single point door lock. Backset: 50mm. Key cylinder below handle. Euro style single point lock. L......see more
GU single point door lock. Backset: 50mm. Key cylinder below handle. Euro style single point lock. Lock uses a full european key cylinder. This lock is a single point and cannot be attached to a multipoint. **Non-returnable. Not always in stock, please call to check. May take 3 to 4 weeks to ship.…
GU Single Point Lock 854-11113
GU single point door lock. Backset: 35mm(1.38). Key cylinder below handle. Cylinder hole with insert......see more
GU single point door lock. Backset: 35mm(1.38). Key cylinder below handle. Cylinder hole with insert that accepts a tailpiece.…
GU Single Point Lock 854-15489
GU single point door lock. Backset: 50mm(2.00). Key cylinder below handle. Cylinder hole with insert......see more
GU single point door lock. Backset: 50mm(2.00). Key cylinder below handle. Cylinder hole with insert that accepts a tailpiece. GU Lock 6-33105-AT-0-0. Markings: 9-39432-21 50/92; G24056. 50/92/8.…
GU Single Point Lock 854-15552
GU single point lock. Backset: 55mm. Key cylinder below handle. Euro style single point lock.
Als......see more
GU single point lock. Backset: 55mm. Key cylinder below handle. Euro style single point lock. Also a Replacement for WinkHause 55mm Single point lock. **Not always in stock, please call to check. May take 3 to 4 weeks to ship.…
GU Single Point Lock 854-15559
GU single point lock. Backset: 30mm. Key cylinder below handle. Euro style single point lock that ac......see more
GU single point lock. Backset: 30mm. Key cylinder below handle. Euro style single point lock that accepts a full european profile cylinder. **Not always in stock, please call to check. May take 3 to 4 weeks to ship.…
GU Strike Plate 854-16794
GU Strike Plate. Not always in stock. Allow 4 weeks for them to ship.
Gu part number 9-33802-00-0-......see more
GU Strike Plate. Not always in stock. Allow 4 weeks for them to ship.
Gu part number 9-33802-00-0-1…
GU Strike Plate Left Hand 854-16775
GU Strike Plate Left Hand 854-16775. GU strike: E-22867-00-L-1.
Special order, will take 1-2 week......see more
GU Strike Plate Left Hand 854-16775. GU strike: E-22867-00-L-1.
Special order, will take 1-2 weeks to ship. Non-returnable.
Total Length: 7.44" (189mm)
Total Width: 0.67" (17mm)…
GU Strike Plate Right Hand 854-16774
GU Strike Plate Right Hand 854-16774. GU part number: E-22867-00-R-1.
Special order, will take 1-......see more
GU Strike Plate Right Hand 854-16774. GU part number: E-22867-00-R-1.
Special order, will take 1-2 weeks to ship. Non-returnable.
Total Length: 7.44" (189mm)
Total Width: 0.67" (17mm)…
GU Strikes 854-15697
GU Strike plates. Stainless steel. Includes middle keeper for latch and deadbolt and 1 top and botto......see more
GU Strike plates. Stainless steel. Includes middle keeper for latch and deadbolt and 1 top and bottom keeper. 6 screws included. Non Handed with Clear Protective Film.…
GU Swing Door Spindle 854-14110
GU swing door spindle for GU handle sets. 8mm x 8mm x 110mm. Fits doors up to 2" thick. Total S......see more
GU swing door spindle for GU handle sets. 8mm x 8mm x 110mm. Fits doors up to 2" thick. Total Spindle Length: 4-3/8". ***Special order, allow 1 to 2 weeks to ship.…
GU Swing Door Spindle 854-14112
GU swing door spindle for GU handle sets. 8mm x 8mm x 130mm......see more
GU swing door spindle for GU handle sets. 8mm x 8mm x 130mm…
GU Tilt and Slide Left Bogie 854-14936
GU tilt and slide replacement runner set. Left Hand. GU part #K-15276-RH
Left Hand and Right Hand i......see more
GU tilt and slide replacement runner set. Left Hand. GU part #K-15276-RH Left Hand and Right Hand is determined by standing in front of the door and if the handle is on the left then it is LH. ***Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Tilt and Slide Right Bogie 854-14937
GU tilt and slide replacement runner set. Right Hand. GU part #K-15276-RH
Left Hand and Right Hand ......see more
GU tilt and slide replacement runner set. Right Hand. GU part #K-15276-RH Left Hand and Right Hand is determined by standing in front of the door and if the handle is on the left then it is LH. ***Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Tilt and Turn Dirigent Handle 854-10442
GU Interior low profile Dirigent handle 6-28101-00-0-7. Color: White. Uses 7mm square spindle. No Sp......see more
GU Interior low profile Dirigent handle 6-28101-00-0-7. Color: White. Uses 7mm square spindle. No Spindle included. Tilt and turn Uni-Jet Dirigent F/F window handle. 43mm Mounting Hole Distance. The turn handles DIRIGENT captivate by their clear shape. Elegance and functionality are the main features of the DIRIGENT design. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Tilt-Turn Handle 854-14658
GU Spacio Tilt and Turn handle. Color: Silver. This handle is used w/ AS130 Hardware System (Us......see more
GU Spacio Tilt and Turn handle. Color: Silver. This handle is used w/ AS130 Hardware System (Uses hinges that required drilling the frame.) 84mm or 98mm mounting hole centers. G-U Spacio geared handle G-46551-00-0-1. Non-returnable.…
GU Tilt-Turn Handle 854-14659
GU Spacio Tilt and Turn window handle. Color: Dark Bronze. The handle is used w/ AS130 Hardware Syst......see more
GU Spacio Tilt and Turn window handle. Color: Dark Bronze. The handle is used w/ AS130 Hardware System (Uses hinges that required drilling the frame). 84mm or 98mm mounting hole centers. G-U Spacio geared handle G-46551-00-0-5. ***Not always in stock, may take 3 to 4 weeks to ship. Non-returnable.…
GU Tilt-Turn Handle 854-14660
GU Spacio Tilt and Turn handle. Color: White. This handle is used w/ AS130 Hardware System (Use......see more
GU Spacio Tilt and Turn handle. Color: White. This handle is used w/ AS130 Hardware System (Uses hinges that required drilling the frame.) 84mm or 98mm mounting hole centers. G-U Spacio geared handle G-46551-00-0-7. ***Not always in stock, may take 3 to 4 weeks to ship. Non-returnable.…
GU Tilt-Turn Handle 854-14661
GU Spacio Tilt and Turn handle. Color: Silver. This handle is used w/ AK8 Hardware System (Uses......see more
GU Spacio Tilt and Turn handle. Color: Silver. This handle is used w/ AK8 Hardware System (Uses hinges that clamp in the frame groove.) 96mm or 104mm mount hole centers. G-U Spacio geared handle G-46551-96-0-1. ***Not always in stock, may take 3 to 4 weeks to ship. Please call to order.…
GU Tilt-Turn Handle 854-14662
GU Spacio Tilt and Turn handle. Color: Dark Bronze. This handle is used w/ AK8 Hardware System ......see more
GU Spacio Tilt and Turn handle. Color: Dark Bronze. This handle is used w/ AK8 Hardware System (Uses hinges that clamp in the frame groove.) 96mm or 104mm mount hole centers. G-U Spacio geared handle G-46551-96-0-5. ***Not always in stock, may take 3 to 4 weeks to ship. Non-returnable.…
GU Tilt-Turn Handle 854-16673
GU Spacio Tilt and Turn handle. Color: Aluminum Silver. GU geared handle with 2 forks.
***Special......see more
GU Spacio Tilt and Turn handle. Color: Aluminum Silver. GU geared handle with 2 forks. ***Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Top Extension 500mm 854-14412
GU Top Extension for doors taller than 81". Extension Length: 500mm 19 11-16". Silver......see more
GU Top Extension for doors taller than 81". Extension Length: 500mm 19 11-16". Silver Finish. 854-14412. GU Part number: G-16790-05-0-1R.…
GU Top Extension 500mm 854-14417
GU Top Extension for doors taller than 81". Extension Length: 500mm 19 11-16". Stainl......see more
GU Top Extension for doors taller than 81". Extension Length: 500mm 19 11-16". Stainless Steel Finish. 854-14417. GU Part number: G-16790-05-0-8.…
GU Top Extension Black 500mm 854-14415
GU Top Extension with Black faceplate, 500mm Cremona 19 11-16 inches length. 854-14415. Part number......see more
GU Top Extension with Black faceplate, 500mm Cremona 19 11-16 inches length. 854-14415. Part number: G-16790-05-0-6N.…
GU Top Shootbolt 854-16906
G-U Top Shootbolt for G-U lever operated gear system for inactive doors. Length: 160mm. GU Lever Ope......see more
G-U Top Shootbolt for G-U lever operated gear system for inactive doors. Length: 160mm. GU Lever Operated Gear Shootbolt 6-28158-00-0-1. Euro-groove 7/8 x 4mm. SRH: 470-2800mm. Used on GU Uni-Jet fold and slide lock system. Lever Operated Gear with Lower Shootbolt: 854-16905 (sold separately). ***Special order, non-returnable. Allow 4 to 6 weeks to ship.…
GU Torino Active Door Handle Set Satin Nickel 854-15881
GU Torino Active Door Handle Set, Satin Nickel, Key Below Handle. 30mm Backplate width.
Active do......see more
GU Torino Active Door Handle Set, Satin Nickel, Key Below Handle. 30mm Backplate width.
Active door handle with interior thumbturn and exterior key lock.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• US cylinder with standard Schlage "C" keyway
• Made of Solid Brass.
• Stainless Steel set screw on levers to secure spindle.
• 90° locking with thumb-turn.
• Self-centering spindle.
• Use with mortise lock, SECURY S2, SH2 and SECURY Automatic door gears.
• Patented handle clipping system.
***Special order, non-returnable. Allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Torino / 854-15881
30mm
Above Cylinder
Active
Satin Nickel
…
GU Tripact Extension 854-10907
GU Tripact Extension with Lock Point. 750mm(29.53"). Finish: Silver. GU part 6-33279-05-0-1.......see more
GU Tripact Extension with Lock Point. 750mm(29.53"). Finish: Silver. GU part 6-33279-05-0-1.…
GU Venice Active Door Handle Set 854-15535
GU Venice Active Swing Door Handle Set, Polished Brass. Handle above cylinder. Active handles h......see more
GU Venice Active Swing Door Handle Set, Polished Brass. Handle above cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Solid brass trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-15535
45mm
Above Cylinder
Active
Polished Brass
…
GU Venice Active Door Handle Set 854-15721
GU Venice Active Swing Door Handle Set, Dark Bronze Powder Coat. Handle above cylinder. Active ......see more
GU Venice Active Swing Door Handle Set, Dark Bronze Powder Coat. Handle above cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Zamac trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
***Not always in stock, please call to check, may take 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-15721
45mm
Above Cylinder
Active
Dark Bronze Powder Coat
…
GU Venice Active Door Handle Set 854-15755
GU Venice Active Swing Door Handle Set, Polished Brass. Handle below cylinder. Active handles h......see more
GU Venice Active Swing Door Handle Set, Polished Brass. Handle below cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Zamac trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-15755
45mm
Below Cylinder
Active
Polished Brass
…
GU Venice Active Door Handle Set 854-15757
GU Venice Active Swing Door Handle Set, Polished Brass. Handle above cylinder. Active handles h......see more
GU Venice Active Swing Door Handle Set, Polished Brass. Handle above cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Zamac trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-15757
45mm
Above Cylinder
Active
Polished Brass
…
GU Venice Active Door Handle Set 854-15814
GU Venice Active Swing Door Handle Set, Polished Brass. Handle below cylinder. Active handles h......see more
GU Venice Active Swing Door Handle Set, Polished Brass. Handle below cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Solid Brass trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-15814
45mm
Below Cylinder
Active
Polished Brass
…
GU Venice Active Door Handle Set 854-15988
G-U Venice Active Door Handle Set, Black Powder Coat. 30mm Backplate Width. Handle above key cy......see more
G-U Venice Active Door Handle Set, Black Powder Coat. 30mm Backplate Width. Handle above key cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Zamac trim set.
• Unassembled kit for 1-3/4" or 2-1/4" thick doors.
• Stainless Steel set screw on levers to secure spindle.
• 90° locking with thumb-turn.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system.
***Special order, allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-15988
30mm
Above Cylinder
Active
Black Powder Coat
…
GU Venice Active Door Handle Set 854-15989
G-U Venice Active Door Handle Set, White Powder Coat. 30mm Backplate Width. Handle above key cy......see more
G-U Venice Active Door Handle Set, White Powder Coat. 30mm Backplate Width. Handle above key cylinder.
Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Zamac trim set.
• Unassembled kit for 1-3/4" or 2-1/4" thick doors.
• Stainless Steel set screw on levers to secure spindle.
• 90° locking with thumb-turn.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system.
***Special order, non-rerunnable. Allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-15989
30mm
Above Cylinder
Active
White Powder Coat
…
GU Venice Active Door Handle Set 854-15995
G-U Venice Active Door Handle Set, Black Powder Coat. 30mm Backplate Width. Handle Below key cy......see more
G-U Venice Active Door Handle Set, Black Powder Coat. 30mm Backplate Width. Handle Below key cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Zamac trim set.
• Unassembled kit for 1-3/4" or 2-1/4" thick doors.
• Stainless Steel set screw on levers to secure spindle.
• 90° locking with thumb-turn.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system.
***Special order, non-returnable. Allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-15995
30mm
Below Cylinder
Active
Black Powder Coat
…
GU Venice Active Door Handle Set 854-16069
GU Venice Active Swing Door Handle Set, Oil Rubbed Bronze. Handle above cylinder. Active handle......see more
GU Venice Active Swing Door Handle Set, Oil Rubbed Bronze. Handle above cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Solid Brass trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-16069
45mm
Above Cylinder
Active
Oil Rubbed Bronze
…
GU Venice Active Door Handle Set 854-16070
G-U Venice Active Door Handle Set, Satin Nickel. Handle above key cylinder. Active handles have......see more
G-U Venice Active Door Handle Set, Satin Nickel. Handle above key cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Solid brass trim set.
• Stainless Steel set screw on levers to secure spindle.
• 90° locking with thumb-turn.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system.
***Special order, non-returnable. Allow around 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Capri / 854-16070
45mm
Above Cylinder
Active
Satin Nickel
…
GU Venice Active Door Handle Set 854-16077
GU Venice Active Swing Door Handle Set, Antique Brass. Handle below cylinder. Active handles ha......see more
GU Venice Active Swing Door Handle Set, Antique Brass. Handle below cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Solid Brass trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
***Special order, not always in stock, may take 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-16077
45mm
Below Cylinder
Active
Antique Brass
…
GU Venice Active Door Handle Set 854-16078
GU Venice Active Swing Door Handle Set, Oil Rubbed Bronze. Handle below cylinder. Active handle......see more
GU Venice Active Swing Door Handle Set, Oil Rubbed Bronze. Handle below cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
•Solid Brass trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
***Special order, non-returnable. Allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-16078
45mm
Below Cylinder
Active
Oil Rubbed Bronze
…
GU Venice Active Door Handle Set 854-16079
GU Venice Active Swing Door Handle Set, Satin Nickel. Handle below cylinder. Active handles hav......see more
GU Venice Active Swing Door Handle Set, Satin Nickel. Handle below cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Solid Brass trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
***Special order, allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-16079
45mm
Below Cylinder
Active
Satin Nickel
…
GU Venice Active Door Handle Set 854-16131
GU Venice Active Swing Door Handle Set, Black Powder Coat. Handle above cylinder. Active handle......see more
GU Venice Active Swing Door Handle Set, Black Powder Coat. Handle above cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Zamac trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
***Special order, non-returnable. Allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-16131
45mm
Above Cylinder
Active
Black Powder Coat
…
GU Venice Active Door Handle Set 854-16136
GU Venice Active Swing Door Handle Set, Dark Bronze Powder Coat. Handle below cylinder. Active ......see more
GU Venice Active Swing Door Handle Set, Dark Bronze Powder Coat. Handle below cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
•Zamak trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
***Special order, non-returnable. Allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-16136
45mm
Below Cylinder
Active
Dark Bronze Powder Coat
…
GU Venice Active Door Handle Set 854-16137
GU Venice Active Swing Door Handle Set, Black Powder Coat. Handle below cylinder. Active handle......see more
GU Venice Active Swing Door Handle Set, Black Powder Coat. Handle below cylinder. Active handles have an interior thumbturn and an exterior key lock. Key cylinder is an American style with a tail piece.
• Solid Brass trim set.
• Stainless Steel set screw on levers to secure spindle.
• US cylinder with standard Schlage "C" keyway.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
***Special order, non-returnable. Allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-16137
45mm
Below Cylinder
Active
Black Powder Coat
…
GU Venice Dummy Door Handle Set 854-15974
G-U Venice Fixed Dummy Door Handle Set, White Powder Coat. 30mm Backplate Width. Handle above o......see more
G-U Venice Fixed Dummy Door Handle Set, White Powder Coat. 30mm Backplate Width. Handle above or below. Dummy handles are fixed and do not move. No thumbturn or exterior key lock. Used on Inactive and Stationary doors.
• Zamac trim set.
• Unassembled kit for 1-3/4" or 2-1/4' thick doors.
• Stainless Steel set screw on levers to secure spindle.
• Self-centering spindle.
• Patented handle clipping system.
***Special order, allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-15974
30mm
Above or Below
Fixed Dummy
White Powder Coat
…
GU Venice Dummy Door Handle Set 854-16053
GU Venice Fixed Dummy Door Handle Set, Oil Rubbed Bronze. Handle above or below. Dummy handles ......see more
GU Venice Fixed Dummy Door Handle Set, Oil Rubbed Bronze. Handle above or below. Dummy handles are fixed and do not move. No thumbturn or exterior key lock. Used on Inactive and Stationary doors.
• Solid Brass trim set.
• Stainless Steel set screw on levers to secure spindle.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Patented handle clipping system
***Special order, non-returnable. Allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-16053
45mm
Above or Below
Fixed Dummy
Oil Rubbed Bronze
…
GU Venice Dummy Door Handle Set 854-16121
GU Venice Fixed Dummy Door Handle Set, Black Powder Coat. Handle above or below. Dummy handles ......see more
GU Venice Fixed Dummy Door Handle Set, Black Powder Coat. Handle above or below. Dummy handles are fixed and do not move. No thumbturn or exterior key lock. Used on Inactive and Stationary doors.
• Zamac trim set.
• Stainless Steel set screw on levers to secure spindle.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Patented handle clipping system
***Not always in stock, please call to check, may take 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-16121
45mm
Above or Below
Fixed Dummy
Black Powder Coat
…
GU Venice Semi-Active Door Handle Set 854-15980
G-U Venice Semi-Active Door Handle Set, Black Powder Coat. 30mm Backplate Width. Handle above o......see more
G-U Venice Semi-Active Door Handle Set, Black Powder Coat. 30mm Backplate Width. Handle above or below thumbturn. Semi-Active handles have an interior thumbturn only. No exterior key lock.
• Zamac trim set.
• Unassembled kit for 1-3/4" or 2-1/4' thick doors.
• Stainless Steel set screw on levers to secure spindle.
• 90° locking with thumb-turn.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system.
***Special order, allow 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-15988
30mm
Above or Below Thumbturn
Active
Black Powder Coat
…
GU Venice Semi-Active Door Handle Set 854-16062
GU Venice Semi-Active Swing Door Handle Set, Oil Rubbed Bronze. Handle can be above or below thumbtu......see more
GU Venice Semi-Active Swing Door Handle Set, Oil Rubbed Bronze. Handle can be above or below thumbturn. Semi-Active handles have an interior thumbturn only. NO exterior key lock.
• Solid Brass trim set.
• Stainless Steel set screw on levers to secure spindle.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
***Not always in stock, may take 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-16062
45mm
Above or Below Thumbturn
Semi-Active
Oil Rubbed Bronze
…
GU Venice Semi-Active Door Handle Set 854-16128
GU Venice Semi-Active Swing Door Handle Set, Black Powder Coat. Handle can be above or below thumbtu......see more
GU Venice Semi-Active Swing Door Handle Set, Black Powder Coat. Handle can be above or below thumbturn. Semi-Active handles have an interior thumbturn only. NO exterior key lock.
• Solid Brass trim set.
• Stainless Steel set screw on levers to secure spindle.
• 90° locking with thumb-turn.
• Unassembled kit for 1-3/4" and 2-1/4" thick doors.
• Self-centering spindle.
• Use with single point morise locks and multipoint locks.
• Patented handle clipping system
***Not always in stock, may take 3 to 4 weeks to ship.
Style/Model #
Plate Size
Handle Position
Function
Finish
Venice / 854-16128
45mm
Above or Below Thumbturn
Semi-Active
Black powder Coat
…
GU Wolverine Active Shootbolt 854-10572
GU Wolverine 1.75" Backset Manual Gear with Shootbolt
This is the gear and bottom shoot......see more
GU Wolverine 1.75" Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt. Top Shootbolt 854-14426 sold separately. Optionial extension availabe for doors greater than 81" 854-14412.
Manual version engages multipoint when door handle is lifted.
The Wolverine 3-point, height adjustable, locking system features double reinforced shoot bolts, top and bottom for maximum security and protection against warping of the door panels.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: When replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-10572
45/92 8-16-889-1900 US SF
6-29385-01-0-1
45mm
(1.75)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Silver
…
GU Wolverine Active Shootbolt 854-10575
GU Wolverine 1.75" Backset Manual Gear with Shootbolt
This is the gear and bottom shoot......see more
GU Wolverine 1.75" Backset Manual Gear with Shootbolt
This is the gear and bottom shootbolt with stainless steel face plate. Top Shootbolt 854-10886 sold separately. Optionial extension availabe for doors greater than 81", 854-10938.
Manual version engages multipoint when door handle is lifted.
The Wolverine 3-point, height adjustable, locking system features double reinforced shoot bolts, top and bottom for maximum security and protection against warping of the door panels.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: When replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-10572
45/92 8-16-889-1900 US SS
6-29385-11-0-8
45mm
(1.75)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Stainless
Steel
…
GU Wolverine Inactive Shootbolt 854-10558
GU Wolverine 1.75" Backset Manual Inactive Gear with Shootbolt
This is the gear and bottom s......see more
GU Wolverine 1.75" Backset Manual Inactive Gear with Shootbolt
This is the gear and bottom shootbolt. Top Shootbolt 854-10886 sold separately. Optional extension availabe for doors greater than 81" 854-14417. Stainless Steel Screws: 854-11103.
Manual version engages multipoint when door handle is lifted.
The Wolverine 2-point locking system features double reinforced shoot bolts, top and bottom for maximum security and protection against warping of the door panels.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
***Special order. Non-returnable. Allow 3 to 4 weeks for shipping.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Max
Cutoff
Finish
854-10558
45/92 8-16-889-1900 US SS
6-29280-11-0-8
45mm
(1.75)
16mm
(0.62)
889mm
(35.00)
250mm
(9.84)
Stainless
Steel
…
Guide 70-601
C-18 Top Sash Guide Off White Plastic......see more
C-18 Top Sash Guide Off White Plastic…
Guide 70-623
Top Sash Guide for non-tilt window. Nylon. Use with 72-500 carrier and 72-603 sash clip.......see more
Top Sash Guide for non-tilt window. Nylon. Use with 72-500 carrier and 72-603 sash clip.…
Guide 70-639
Window balance guide. Nylon. Window guide used with spiral tube balances.......see more
Window balance guide. Nylon. Window guide used with spiral tube balances.…
Guide Assembly 60-906
Louisiana Pacific 3 piece window balance guide assembly.......see more
Louisiana Pacific 3 piece window balance guide assembly.…
Guide Cap 4-111
Guide cap sold in multiples of 25 only......see more
Guide cap sold in multiples of 25 only…
Guide Roller 854-10196
GU Guide Roller for Bi-Fold. Not always in stock. Allow 4 weeks for them to ship. Special Order, non......see more
GU Guide Roller for Bi-Fold. Not always in stock. Allow 4 weeks for them to ship. Special Order, non returnable.
Gu part number 6-25336-00-0-1…
Guides 70-606A
Top Sash Guide Set Right hand and Left hand......see more
Top Sash Guide Set Right hand and Left hand…
Guides 70-612
Sash guide WB90 Sold in sets 1 left 1 right top sash guide.
...see more
WB90 Sold in sets 1 left 1 right top sash guide.…
- 0 items