GU Lift and Slide Handle 854-15011
GU Lift and Slide handle assembly in Stainless Steel. 240mm handle length. G-U handle K-16793-00-0-8......see more
GU Lift and Slide handle assembly in Stainless Steel. 240mm handle length. G-U handle K-16793-00-0-8. Inside G-U dirigent turn handle set without PC hole. Includes interior turn handle and exterior flush pull, and spindle. GU-934/937 Dirigent handle without PC hole. Sash thickness up to 80mm, adjustable spindle length. ***Special order, non-returnable. Allow around 4 to 6 weeks to ship.…
GU Lift and Slide Handle Inside 854-10153
G-U Lift and Slide Dirigent handle without hole for key cylinder. Color: Dark Bronze. Interior Handl......see more
G-U Lift and Slide Dirigent handle without hole for key cylinder. Color: Dark Bronze. Interior Handle and Pull only. GU Part: 6-24606-00-0-5 ***Special order, non-returnable. Allow 6 to 10 weeks to ship.…
GU Lift and Slide Handle LH 854-14754
GU Lift and slide handle assembly 34225. Color: Dark bronze. Left Hand. G-U handle K-12920-00-L-5.
......see more
GU Lift and slide handle assembly 34225. Color: Dark bronze. Left Hand. G-U handle K-12920-00-L-5.
Rotary handle for conductor, Left-hand side, GU PSK 966 976 mZ, with lockout protection, including installation instructions! For parallel sliding tilt doors and windows made of wood and plastic.
DIN Left : ELEMENT opens from left to right (from the inside).
Designation on base body: GU-34225 , No. GU-34225 is on the lever housing, on older levers the No. 30152. The gear inside the lever bears the number 33281.
***Special order, non-returnable. Allow around 4 weeks to ship.
Right Hand: 854-14756…
GU Lift and Slide Handle RH 854-14756
GU Lift and slide handle assembly 34225. Color: Dark bronze. Right Hand. G-U handle K-12920-00-R-5.
......see more
GU Lift and slide handle assembly 34225. Color: Dark bronze. Right Hand. G-U handle K-12920-00-R-5.
Rotary handle for conductor, Left-hand side, GU PSK 966 976 mZ, with lockout protection, including installation instructions! For parallel sliding tilt doors and windows made of wood and plastic.
DIN Right: ELEMENT opens from right to left (from the inside).
Designation on base body: GU-34225 , No. GU-34225 is on the lever housing, on older levers the No. 30152. The gear inside the lever bears the number 33281.
***Special order, non-returnable. Allow around 4 weeks to ship.
Left Hand: 854-14754…
GU Lift and Slide Inside Handle 854-10152
G-U Lift and Slide Dirigent handle without hole for key cylinder. Color: Silver. Interior Handle and......see more
G-U Lift and Slide Dirigent handle without hole for key cylinder. Color: Silver. Interior Handle and Pull only. GU Part: 6-24606-00-0-1. Handle Markings: 9-29519; 6432. ***Special order, non-returnable. Allow 6 to 10 weeks to ship.…
GU Lift and Slide Interior Cover Plate 854-13021
G-U Lift and slide interior handle cover pate with cylinder hole. Color: Silver. Use with G-U lift a......see more
G-U Lift and slide interior handle cover pate with cylinder hole. Color: Silver. Use with G-U lift and slide handle. GU Cover 9-37909-02-0-1. **Special order, non-returnable. Allow 6-8 weeks to ship.…
GU Lift and Slide Locking Gear 854-10619
GU 934 Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 2115mm - 2765mm. H......see more
GU 934 Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 2115mm - 2765mm. Handle Height: 1010mm. Faceplate finish: Dark Bronze. G-U Lock 6-30021-28-0-5. G-U 934 Hardware, Sash Thickness 56-68mm.
***Special order, non-returnable. Allow 4 to 8 weeks for shipping.
Note: Due to the length of this lock, there will be additional shipping charges.…
GU Lift Locking Gear 854-10606
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 865mm - 1285mm. Han......see more
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 865mm - 1285mm. Handle Height: 410mm. Faceplate finish: Dark Bronze. GU lift locking gear 6-30019-11-0-5. GU 937 Lift and Slide Door Hardware for profile cylinder. Sash Thickness 56-68mm. A replacement for GU 936 but you must also change the runners and the connecting rod. ***Special order, non-returnable. Allow around 6 to 8 weeks for shipping.…
GU Lift Locking Gear 854-10608
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 1865mm - 2365mm. Ha......see more
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 1865mm - 2365mm. Handle Height: 1010mm. Faceplate finish: Silver. GU lock 6-30019-24-0-1. GU 937 Lift and Slide Door Hardware for profile cylinder. Sash Thickness 56-68mm. A replacement for GU 936 but you must also change the runners and the connecting rod. ***Special order, non-returnable. Allow around 6 to 8 weeks for shipping.…
GU Lift Locking Gear 854-10609
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 1865mm - 2365mm. Ha......see more
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 1865mm - 2365mm. Handle Height: 1010mm. Faceplate finish: Dark Bronze. GU lock 6-30019-24-0-5. GU 937 Lift and Slide Door Hardware for profile cylinder. Sash Thickness 56-68mm. A replacement for GU 936 but you must also change the runners and the connecting rod. ***Special order, non-returnable. Allow around 6 to 8 weeks for shipping.…
GU Lift Locking Gear 854-10616
GU Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 1865mm - 2365mm. Handl......see more
GU Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 1865mm - 2365mm. Handle Height: 1010mm. Faceplate finish: Silver. GU part #6-30021-24-0-1. GU 934 Hardware, Sash Thickness 56-68mm. ***Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Lift Locking Gear 854-10617
GU Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 1865mm - 2365mm. Handl......see more
GU Lift and Slide Lift locking gear. Backset.: 37.5mm. Sash Height: 1865mm - 2365mm. Handle Height: 1010mm. Faceplate finish: Dark Bronze. GU part #6-30021-24-0-5. GU 934 Hardware, Sash Thickness 56-68mm. ***Special order, non-returnable. Allow 3 to 4 weeks for shipping.…
GU Lift Locking Gear 854-16955
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 865mm - 1285mm. Han......see more
GU Lift and Slide Lift locking gear 937. Backset: 27.5mm. Sash Height: 865mm - 1285mm. Handle Height: 410mm. Faceplate finish: Silver. GU lift locking gear 6-30019-11-0-1. GU 937 Lift and Slide Door Hardware for profile cylinder. Sash Thickness 56-68mm. A replacement for GU 936 but you must also change the runners and the connecting rod. ***Special order, non-returnable. Allow around 6 to 8 weeks for shipping.…
GU Lock Strike Plate Left Hand 854-16202
G-U multipoint door lock latch and deadbolt strike plate. Left Hand. GU Strike 6-38678-09-L-FG. ......see more
G-U multipoint door lock latch and deadbolt strike plate. Left Hand. GU Strike 6-38678-09-L-FG. ***Special order, non-returnable. Allow 3-4 weeks to ship. Right Hand Strike: 854-16203…
GU Lock Strike Plate Pack 854-15532
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Color: Dark Bronze. Non-Hand......see more
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Color: Dark Bronze. Non-Handed. Use with Secury Automatic Door Locks. Includes middle keeper, 1 top and 1 bottom keeper. 6 screws included.…
GU Lock Strike Plate Pack 854-15683
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Color: Polished Brass. Non-H......see more
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Color: Polished Brass. Non-Handed. Use with Secury Automatic Door Locks. Includes middle keeper, 1 top and 1 bottom keeper. 6 screws included. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Lock Strike Plate Pack 854-15686
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Stainless Steel Finish. Non-......see more
G-U multipoint door lock strike plate pack for 1-3/4" thick doors. Stainless Steel Finish. Non-Handed. Use with Secury Automatic Door Locks. Includes middle keeper, 1 top and 1 bottom keeper. 6 screws included. K-C4774-45-0-11 ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
GU Lock Strike Plate Pack Black 854-15691
G-U multipoint door lock strike plate pack for 2-1/4" thick doors. Color: Black. Non-Handed. Us......see more
G-U multipoint door lock strike plate pack for 2-1/4" thick doors. Color: Black. Non-Handed. Use with Secury Automatic Door Locks. Includes middle keeper, 1 top and 1 bottom keeper. 6 screws included. K-C4775-57-0-6. **Non-returnable. Not always in stock, may take 3 to 4 weeks to ship.…
GU Lock Strike Plate Right Hand 854-16203
G-U multipoint door lock latch and deadbolt strike plate. Right Hand. GU Strike 6-38678-09-R-FG.&nbs......see more
G-U multipoint door lock latch and deadbolt strike plate. Right Hand. GU Strike 6-38678-09-R-FG. ***Special order, non-returnable. Allow 3-4 weeks to ship. Left Hand Strike: 854-16202…
GU Locking Block 854-14761
GU locking block with key. Turn blocker. Color: White. Used on Tilt and Turn windows. GU/ ......see more
GU locking block with key. Turn blocker. Color: White. Used on Tilt and Turn windows. GU/ Ferco part number K-12968-00-0-7.
Special order, non-returnable. Allow 4 weeks shipping.…
GU Locking Bolts 854-15607
GU Lift and Slide Bag of Locking Bolts 2/14 for Lift Lock Gear. Includes 2 bolts, 2 plates and 4 scr......see more
GU Lift and Slide Bag of Locking Bolts 2/14 for Lift Lock Gear. Includes 2 bolts, 2 plates and 4 screws. Used on GU Lift and slide doors. GU Part: K-10563-00-0-8. ***Special order, allow 3 to 4 weeks for shipping.…
GU LOG Support Plate 854-16907
G-U lever operated gear shootbolt support plate guide. GU LOG Shootbolt Guide 9-36996-00-0-1. Plate ......see more
G-U lever operated gear shootbolt support plate guide. GU LOG Shootbolt Guide 9-36996-00-0-1. Plate for stabilizing the faceplate rod in the upper area. Euro-groove 7/8 x 4mm. Used on GU Uni-Jet fold and slide lock system. ***Special order, non-returnable. Allow 4 to 6 weeks to ship.…
GU Lower Drill In Door Hinge 854-16196
G-U pivot rest and drill in door hinge. Lower door hinge. Uni-Jet sash hinge 6-36882-22-0-1. Pin Len......see more
G-U pivot rest and drill in door hinge. Lower door hinge. Uni-Jet sash hinge 6-36882-22-0-1. Pin Length: 22mm. Corner hinge support for PVC tilt-and-turn windows and French doors. ***Special order, non-returnable. Allow 4 to 6 weeks to ship.…
GU Middle Keeper 854-15524
GU polished brass middle keeper for 45 mm 1 3/4" thick door.. Non Handed. Clear protective film. #8 ......see more
GU polished brass middle keeper for 45 mm 1 3/4" thick door.. Non Handed. Clear protective film. #8 x 5/8" flat head, philips screws included.…
GU Mishandling Device 854-10714
GU tilt and turn mishandling device. Wrong operation safety device. G-U 9-40462-10.
Markings: ......see more
GU tilt and turn mishandling device. Wrong operation safety device. G-U 9-40462-10.
Markings: 9-40497
***Special order, non-returnable. Allow around 4 weeks to ship.…
GU Monobloc Dirigent Handle Set 854-16166
G-U 28/98 Monobloc T/S Manilla Active door handle set. Color: Silver. Square style backplate. 92mm H......see more
G-U 28/98 Monobloc T/S Manilla Active door handle set. Color: Silver. Square style backplate. 92mm Handle PZ. 8mm Spindle. Monobloc narrow frame set with Dirigent handle. No key cylinder included. Monobloc Manilla Handle H-01215-45-0-1. ***Special order, non-returnable. Allow 4 to 6 weeks to ship.…
GU Reversing Gear 854-10886
GU shootbolt top Reversing gear, Stainless steel finish. 160mm 6.29921 inches 854-10886. GU Reversin......see more
GU shootbolt top Reversing gear, Stainless steel finish. 160mm 6.29921 inches 854-10886. GU Reversing Gear 6-33085-00-0-8.…
GU Reversing Gear 854-12620
GU shootbolt Reversing gear 150mm 5.91 inches 854-12620. GU part number: 8-00670-00-0-1......see more
GU shootbolt Reversing gear 150mm 5.91 inches 854-12620. GU part number: 8-00670-00-0-1…
GU Reversing Gear 854-14426
GU shootbolt reversing gear. Silver finish. Length: 160mm (6.29"). Top shootbolt used with GU m......see more
GU shootbolt reversing gear. Silver finish. Length: 160mm (6.29"). Top shootbolt used with GU multipoint door locks. Stamped 16798 and E16744. G-U G-16798-00-0-1.…
GU Reversing Gear 854-14431
GU top shootbolt reversing gear, Stainless steel finish. 160mm 6.29921 inches 854-14431. GU Reversin......see more
GU top shootbolt reversing gear, Stainless steel finish. 160mm 6.29921 inches 854-14431. GU Reversing Gear G-16798-00-0-8.…
GU Rhino Lock Top Extension 854-16152
GU Rhino door lock extension with hook lock point. Length: 650mm (25.59"). Finish: Silver. GU P......see more
GU Rhino door lock extension with hook lock point. Length: 650mm (25.59"). Finish: Silver. GU Part G-18821-00-0-1.…
GU Rhinobolt Hook Door Lock 854-12375
GU Rhinobolt Hook Door Lock 1.38" (35/92) Backset, Manual Gear.
This is the gear with t......see more
GU Rhinobolt Hook Door Lock 1.38" (35/92) Backset, Manual Gear.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Optionial extension availabe for taller doors, please contact us.
Total Length of this lock: 89.96" (2285mm). This lock uses a European Profile Cylinder.
Manual version engages multipoint when door handle is lifted.
3- Point locking system features tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reveresed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Not always in stock, may take 3 to 4 weeks to ship. Non-returnable.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Rhino Hook Lock, 5/8" Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-12375
35/92 8-16-1050-2285 PZ FG
GU Lock: 6-UA400-35-1-1
35mm
(1.38)
16mm
(0.62)
Adjustable:
W/O Shoots: 785mm - 1050mm
W/ Shoots: 995mm - 1145mm
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU Rhinobolt Hook Door Lock 854-12382
GU Rhinobolt Hook Multipoint Door Lock 2.17" (55/92) Backset, Manual Gear.
This is the ......see more
GU Rhinobolt Hook Multipoint Door Lock 2.17" (55/92) Backset, Manual Gear.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Optional extension available for taller doors, please contact us.
Total Length of this lock: 89.96" (2285mm). Uses American style cylinder with tailpiece.
Manual version engages multipoint when door handle is lifted.
3- Point locking system features tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reversed.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-12382
A-S 55/92 8-16-1050-2285 US FG
GU Lock: 6-UA400-55-0-1
55mm
(2.17)
16mm
(0.62)
889mm (35") Standard,
Adjustable up to 1041mm (41" with extensions)
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU Rhinobolt Hook Lock 854-10853
GU Rhinobolt Hook Lock 2.187" (55/92) Backset, Manual Gear.
This is the gear with the b......see more
GU Rhinobolt Hook Lock 2.187" (55/92) Backset, Manual Gear.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Optionial extension availabe for taller doors, please contact us.
Total Length of this lock: 89.96" (2285mm). This lock uses a European Profile Cylinder.
Manual version engages multipoint when door handle is lifted.
3- Point locking system features tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reveresed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Not always in stock, may take 3 to 4 weeks to ship. Non-returnable.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Rhino Hook Lock, 5/8" Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-10853
55/92 8-16-1050-2285 US FG
GU Lock: 6-32486-04-0-1
55mm
(2.187)
16mm
(0.62)
Adjustable:
W/O Shoots: 785mm - 1050mm
W/ Shoots: 995mm - 1145mm
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU Rhinobolt Hook Lock 854-10930
GU Rhinobolt Hook Lock 1.38" (35/92) Backset, Manual Gear.
This is the gear with the bo......see more
GU Rhinobolt Hook Lock 1.38" (35/92) Backset, Manual Gear.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Optionial extension availabe for taller doors, please contact us.
Total Length of this lock: 89.96" (2285mm).
Manual version engages multipoint when door handle is lifted.
3- Point locking system featurer tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reveresed.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Not always in stock. May take around 4 weeks to ship.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-10930
35/92 8-16-1050-2285 US FG
GU Lock: 6-33400-01-0-1
35mm
(1.38)
16mm
(0.62)
Adjustable
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU Rhinobolt Hook Lock 854-12380
GU Multipoint Door Lock with Rhinobolt Hooks. 2" (50/92) Backset, Manual Lock Gear.
This is ......see more
GU Multipoint Door Lock with Rhinobolt Hooks. 2" (50/92) Backset, Manual Lock Gear.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Optional extension available for taller doors, please contact us.
Total Length of this lock: 89.96" (2285mm).
Manual version engages multipoint when door handle is lifted.
3- Point locking system features tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reversed.
If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Not always in stock. May take around 3-4 weeks to ship.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-12380
50/92 8-16-1050-2285 US FG
GU Lock: 6-33400-
35mm
(1.38)
16mm
(0.62)
Adjustable
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU Rhinobolt Hook Lock 854-16902
GU Rhinobolt Hook Door Lock 2.375" (60/92) Backset, Manual Gear. Uses Euro profile cylinde......see more
GU Rhinobolt Hook Door Lock 2.375" (60/92) Backset, Manual Gear. Uses Euro profile cylinder.
This is the gear with the bottom rhino hook and top rhino hook. Optional Top Shootbolt 854-14551 and optional bottom shootbolt 854-14549 sold separately. Extension without lock point availabe for taller doors 854-12610, sold separately.
Total Length of this lock: 89.96" (2285mm). This lock uses a European Profile Cylinder.
Manual version engages multipoint when door handle is lifted.
3-Point locking system features tempered steel hooks which lock in an upward direction providing maximum security and protection against warping of the door panels. Heavy duty mortise construction with reinforced lever return spring system. Two steel horns 1" lock in an upward direction providing an anti-lift device. 3/4" throw on deadbolt. Latch is non-handed and can be reveresed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Special order, non-returnable. Allow around 3 to 4 weeks to ship.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Rhino Hook Lock, 5/8" Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-16902
60/92 8-16-1050-2285 PZ FG
GU Lock: 6-UA400-60-1-1
60mm
(2.375)
16mm
(0.62)
Adjustable:
W/O Shoots: 785mm - 1050mm
W/ Shoots: 995mm - 1145mm
568mm
(22.375)
660mm
(25.98)
NA
Silver
…
GU RhinoShoot Hook Shootbolt Lock 854-12391
GU RhinoShoot Hook and Shootbolt Lock 2.00" (50/92) Backset, Manual Gear. Active Door Lock......see more
GU RhinoShoot Hook and Shootbolt Lock 2.00" (50/92) Backset, Manual Gear. Active Door Lock
This is the Active gear with the bottom shootbolt, bottom rhino hook and top rhino hook. Top Shootbolt 854-14431 sold separately. Extension for doors taller than 81", 854-14417 sold separately. Installation Screws 854-11103.
Manual version engages multipoint when door handle is lifted.
The Rhino-shoot 5-point locking system features shoot bolts, top and bottom, two tempered steel “horns” which lock in an upward direction providing maximum security and protection against warping of the door panels. Also featured is our 90 degree locking mechanism that incorporates a standard US cylinder. Heavy duty mortise construction with reinforced lever return spring system. Top and bottom shoot bolts, two steel “horns”, deadbolt and latch.Latch is non-handed and can be reveresed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Not always in stock. May take around 4 weeks to ship.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Multipoint Lock with 16mm Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-12391
A+S 50/92 8-16-889-1900-US-SS
GU Lock: 6-UA416-50-0-8
50mm
(2.00)
16mm
(0.62)
889mm
(35.00)
568mm
(22.375)
659mm
(25.94)
NA
Stainless
Steel
…
GU RhinoShoot Hook Shootbolt Lock 854-12392
GU RhinoShoot Hook and Shootbolt Lock 2.00" (50/92) Backset, Manual Gear. Active Door Lock......see more
GU RhinoShoot Hook and Shootbolt Lock 2.00" (50/92) Backset, Manual Gear. Active Door Lock, Euro Profile Cylinder
This is the Active gear with the bottom shootbolt, bottom rhino hook and top rhino hook. Top Shootbolt 854-14431 sold separately. Extension for doors taller than 81", 854-14417 sold separately. Installation Screws 854-11103.
This lock uses a European profile cylinder.
Manual version engages multipoint when door handle is lifted.
The Rhino-shoot 5-point locking system features shoot bolts, top and bottom, two tempered steel “horns” which lock in an upward direction providing maximum security and protection against warping of the door panels. Also featured is our 90 degree locking mechanism that incorporates a standard US cylinder. Heavy duty mortise construction with reinforced lever return spring system. Top and bottom shoot bolts, two steel “horns”, deadbolt and latch.Latch is non-handed and can be reveresed.
If you need help selecting the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.
**Special order, non-returnable. Allow around 4 weeks to ship.
**Note: In some cases, when replacing old lock to new lock, modifications to strike plate holes must be made to accept new latch and deadbolt.
G-U Multipoint Lock with 16mm Faceplate Width
Part
Number
GU Part Number
Backset
Faceplate
Handle
Height
Handle to
Top Hook
Handle to
Bottom Hook
Max
Cutoff
Finish
854-12391
A+S 50/92 8-16-889-1900-US-SS
50mm
(2.00)
16mm
(0.62)
889mm
(35.00)
568mm
(22.375)
659mm
(25.94)
NA
Stainless
Steel
…
GU Roma Handle Set for Tedee Smart Lock 854-17004B
GU Roma Active Swing Door Handle set for Tedee smart lock. Color: Black. Includes interior and ......see more
GU Roma Active Swing Door Handle set for Tedee smart lock. Color: Black. Includes interior and exterior backplate and two levers for Smart lock system. Can be used on 1-3/4" or 2-1/4" thick doors. Zamac trim set. G-U handle K-U9092-T1-0-6. Tedee Pro Smart lock sold separately 854-16937. Optional Black Exterior Keypad sold separately: 854-16987 and Smart Bridge 854-16938 also sold separately. For door locks that use and American style cylinder. ***Special order, non-returnable. Allow 3 to 4 weeks to ship.…
- 0 items