Fuhr In Active Sliding Door Handle Set 8763259
Fuhr Sliding Door Handle Set, In Active. Color: Polished Brass.
392 Back plate style with 574 han......see more
Fuhr Sliding Door Handle Set, In Active. Color: Polished Brass. 392 Back plate style with 574 handle style. Fuhr In Active sliding door handle set fits Fuhr multi-point gear system. In Active handle set with thumb turn only. Non-handed. For 1-3/4" door thickness. Hoppe part 8763259. ***Not always in stock, please call to check. May take 3 to 4 weeks to ship.…
Fuhr In Active Sliding Door Handle Set 8763291
Fuhr Sliding Door Handle Set, In Active. Color: Brushed Chrome.
392 Back plate style with 574 han......see more
Fuhr Sliding Door Handle Set, In Active. Color: Brushed Chrome. 392 Back plate style with 574 handle style. Fuhr In Active sliding door handle set fits Fuhr multi-point gear system. In Active handle set with thumb turn only. Non-handed. For 1-3/4" door thickness. Hoppe part 8763291. ***Not always in stock, please call to check. May take 3 to 4 weeks to ship.…
Fuhr In Active Sliding Door Handle Set 8763299
Fuhr Sliding Door Handle Set, In Active. Color: Oil Rubbed Brass.
392 Back plate style with 574 h......see more
Fuhr Sliding Door Handle Set, In Active. Color: Oil Rubbed Brass. 392 Back plate style with 574 handle style. Fuhr In Active sliding door handle set fits Fuhr multi-point gear system. In Active handle set with thumb turn only. Non-handed. For 1-3/4" door thickness. Hoppe part 8763299. ***Not always in stock, please call to check. May take 3 to 4 weeks to ship.…
Fuhr Multipoint Gearbox Replacement Lock 850-499010035
Fuhr door lock replacement gearbox with 35mm(1.38") backset. Will work in multipoint and single......see more
Fuhr door lock replacement gearbox with 35mm(1.38") backset. Will work in multipoint and single point applications. This Fuhr mortise lock case will only replace the newer style multipoint locks that are attached to the faceplate with 3 screws. There is an older style gearbox that does not have screws and this will NOT work.
Specs:
Backset: 1.38" (35mm).
Handle to Cylinder: 3-5/8" (92mm).
Spindle Size: 8mm.
Non-Handed, latch can be reversed. (See Below)
***Special order, non-returnable, allow 1 to 2 weeks to ship.
To Change Handing:
Step One: Remove the Hex head screw holding the spring latch. (see image)
Step Two: Reverse the latch and re-install screw.…
Fuhr Multipoint Gearbox Replacement Lock 850-499010045
Fuhr door lock replacement gearbox with 45mm(1.75") backset. Will work in multipoint and single......see more
Fuhr door lock replacement gearbox with 45mm(1.75") backset. Will work in multipoint and single point applications. This Fuhr mortise lock case will only replace the newer style multipoint locks that are attached to the faceplate with 3 screws. There is an older style gearbox that does not have screws and this will NOT work.
Specs:
Backset: 1.75" (45mm).
Handle to Cylinder: 3-5/8" (92mm).
Spindle Size: 8mm.
Non-Handed, latch can be reversed. (See Below)
***Non-returnable.
To Change Handing:
Step One: Remove the Hex head screw holding the spring latch. (see image)
Step Two: Reverse the latch and re-install screw.…
Fuhr Sliding Door Multipoint 8785527
Fuhr Sliding door multipoint automatic lock with hooks. Backset: 1-3/8" (35mm).
Face Plate Mea......see more
Fuhr Sliding door multipoint automatic lock with hooks. Backset: 1-3/8" (35mm).
Face Plate Measurements: 5/8 Wide x 66-5/8 inches long.
Bottom Hooks Located: 8-1/2 & 24-1/4 inches from the tip of the hook to the center of the handle.
Top Hook: 20 inches from the tip of hook to center of handle, When door is in unlocked position.
Commonly used on Norco sliding doors and others.
…
Fuhr Sliding Door Multipoint Lock 8785515
Fuhr Sliding door multipoint automatic lock with hooks. Backset: 1-1/8" (28mm).
Face Plate Mea......see more
Fuhr Sliding door multipoint automatic lock with hooks. Backset: 1-1/8" (28mm).
Face Plate Measurements: 5/8 Wide x 64-5/8 inches long.
Bottom Hooks Located: 8-1/2 & 24-1/4 inches from the tip of the hook to the center of the handle.
Top Hook: 20 inches from the tip of hook to center of handle, When door is in unlocked position.
Commonly used on Norco doors and others.…
Fuhr Sliding Door Multipoint Lock Keeper 3529997
Sliding door keeper for Fuhr sliding door multipoint lock with 3 hooks. 16mm Flat Strike Plate with ......see more
Sliding door keeper for Fuhr sliding door multipoint lock with 3 hooks. 16mm Flat Strike Plate with Square Ends. Length: 52". Width: 5/8" (16mm). ***Non-returnable.…
Fulcra Door Hinge 856-16185B
Giesse Fulcra door hinge in Black 00700500. Clamp door hinge for profile with channel and ......see more
Giesse Fulcra door hinge in Black 00700500. Clamp door hinge for profile with channel and adjustable in three directions (height, width and compression).
Thanks to the innovative adjustment system (patented) the two hinge bodies are always kept in line regardless of the sideways shift performed.
Clamp style door hinge for Euro groove. Used on Internal openings.
Technical Features
Hinge suitable for doors subject to intensive use (use category 4* - heavy duty use).
The innovative adjustment system (patented) makes it easier and more accurate to align the sash to the frame, always ensuring the perfect alignment of
the two hinge bodies.
Fixing plates of special geometry guarantee the firmest possible attachment on both sides of the profile channel.
The additional strengthening screws on the frame plate increase the slip resistance.
The height adjustment device also acts as an axial bearing, increasing the resistance to fatigue of the hinge (durability grade 7* - 200,000 opening cycles).
Adjustments in the three directions:
- Side adjustment (+/- 2 mm.), using an Allen key on the eccentric pin, then locking it in the desired position by means of two grub screws.
- Height adjustment (0/+ 3 mm.), using an Allen key on the grub screw integral with the frame hinge body.
- Compression adjustment (+/- 0,5 mm.), obtainable by turning the eccentric bush in the frame hinge body.
Load Capacity:
120KG with 2 hinges.
150KG with 3 hinges.
***Special order, non-returnable, non-cancellable. Lead time is around 90 days to ship. Minimum order 10.…
FX7-60 Aluminium Barrel Applicator 59-106
Aluminium Barrel Applicator FX7-60
Rotary barrel and ladder hook
Rubber-coated handle and trigge......see more
Aluminium Barrel Applicator FX7-60
Rotary barrel and ladder hook
Rubber-coated handle and trigger
Multiple-strength thrust block (resistance 6000N)
Double slide bearings for smooth-running function
Push plate optimized for complete emptying
For high viscosity dispensing material
Trigger ratio 17:1
For cartridges 310ml/10.5 fl oz,
Sausages 400ml/11.6 fl oz, 600ml/20.2 fl oz
Color: Silver/Black/Turquoise…
FX7-90 Half Pipe Caulking Gun 59-105
Half Pipe Caulking Applicator FX7-90 with 2yr Warranty
* Rotary carriage and ladder hook
* Rubber-......see more
Half Pipe Caulking Applicator FX7-90 with 2yr Warranty
* Rotary carriage and ladder hook
* Rubber-coated handle and trigger
* Multiple-strength thrust block (resistance 6000N)
* Double slide bearings for smooth-running function
* For high viscosity dispensing material
* Trigger ratio 17:1
* For cartridges 310ml/10.5 fl oz
* Color: Black/Turquoise…
- 0 items