Ashland Shootbolt Tip 56-601


Ashland concealed multipoint shootbolt lock tip replacement. Stainless steel finish. Used with Ashla......see more

Ashland concealed multipoint shootbolt lock tip replacement. Stainless steel finish. Used with Ashland concealed multipoint locks. Shootbolt Thread: 1/4- 20 UNC.…

Ashland Single Point Lock 56-109


Ashland single point door lock for active doors. Backset: 2 3/8" (60mm). Deadbolt throw is 1&qu......see more

Ashland single point door lock for active doors. Backset: 2 3/8" (60mm). Deadbolt throw is 1". Used by Marvin from year 2000 to present. Patent 6,209,931 Faceplate part number 56-110…

Ashland Sliding Door Handle Set 13-343PB


Ashland sliding door handle set. Color: Polished Brass. Active handle with thumb turn with No k......see more

Ashland sliding door handle set. Color: Polished Brass. Active handle with thumb turn with No key. For 1.7" thick doors. Made of solid brass.
10-1/4" Hole Centers. Used by Marvin Integrity, Comfort Line, Therma Tru, Kolbe & Kolbe and others.…

Ashland Sliding Door Handle Set 13-345ORBZ


Ashland Inspirations Active sliding patio door handle set with exterior key lock. Color: Oil Rubbed ......see more

Ashland Inspirations Active sliding patio door handle set with exterior key lock. Color: Oil Rubbed Bronze. Active handles have an interior thumbturn and exterior key lock. For 1.75" to 2" thick doors. Made of solid brass. Handle set used by Marvin Integrity, Jeld-Wen, Comfort Line, Therma Tru, Kolbe and Kolbe ***Non-returnable.…

Ashland Sliding Door Mortise Lock 16-817


Ashland sliding door single point mortise lock, 45mm backset. This lock uses a hook, the center hook......see more

Ashland sliding door single point mortise lock, 45mm backset. This lock uses a hook, the center hook goes into the lock case and pushes the plate back. This allows the thumb turn or key to turn and secure door in locked position. Faceplate Width: 25/32 inch.
Backset: 1-3/4 inch.
Faceplate Length: 10-1/2 inch.
Screw Hole: 5-5/8 inch. ***Special order, allow around 2 to 3 weeks to ship.…

Ashland Sliding Door Trim Set 13-342BRS


Ashland Inspirations Active sliding door handle set. Finish: Polished Brass. Active handle with thum......see more

Ashland Inspirations Active sliding door handle set. Finish: Polished Brass. Active handle with thumb turn and outside key lock. For 1.75" thick doors. Used by Marvin Integrity, Comfort Line, Therma Tru, Kolbe & Kolbe. Special order, allow around 2 weeks for shipping.…

Ashland Sliding Door Trim Set 13-344PB


Ashland Inspirations Passive sliding door handle set. Finish: Polished Brass. Passive handle with no......see more

Ashland Inspirations Passive sliding door handle set. Finish: Polished Brass. Passive handle with no thumb turn and no outside key lock. For 1.75" thick doors. Used by Marvin Integrity, Comfort Line, Therma Tru, Kolbe & Kolbe. Special order, allow around 2 weeks for shipping.…

Ashland True Elegance Trim Kit 16-483AB


Ashland handle set trim adapter kit for 2" thick doors. Finish: Antique Brass. Includes antique......see more

Ashland handle set trim adapter kit for 2" thick doors. Finish: Antique Brass. Includes antique brass screws, spindle and tailpiece.…

Ashland True Elegance Trim Kit 16-483orbz


Ashland handle set trim adapter kit for 2" thick doors. Finish: Oil Rubbed Bronze. Includes oil......see more

Ashland handle set trim adapter kit for 2" thick doors. Finish: Oil Rubbed Bronze. Includes oil rubbed bronze screws, spindle and tailpiece.…

Ashland True Elegance Trim Kit 16-483PB


Ashland handle set trim adapter kit for 2" thick doors. Finish: Polished Brass. Includes polish......see more

Ashland handle set trim adapter kit for 2" thick doors. Finish: Polished Brass. Includes polished brass screws, spindle and tailpiece.…

Ashland XP-25 Multipoint Lock 56-185


Ashland XP-25 Sentinel Multipoint Lock has 2-3/8" backset. Powdered Metal Deadbolt. Does not in......see more

Ashland XP-25 Sentinel Multipoint Lock has 2-3/8" backset. Powdered Metal Deadbolt. Does not include top and bottom shootbolts. Known Markings: Patent: 6.209.931. Caradco 4101341. Ashland Lock W5100-STACT6. Commonly used on Jeldwen doors, Caradco, Therma-Tru and others.
If you are unsure of the correct lock, please call 727-386-4629 to get the proper model numbers for your door. Features:
• Made from the finest 300 series stainless steel for superior corrosion resistance
• Incorporates the “Baby-Sitter Effect” that allows the consumer
to operate the dead bolt and extension bolts independently of each other, eliminating the necessity for the consumer to lift the lever handle and engage the shoot bolts before activating the dead bolt
• Incorporates an “Anti-Slam” device that prevents the lock
bolts from extending until the door is in the closed position, eliminating the potential for door frame damage by the consumer.
• The shoot and dead bolts extend a full one-inch to meet the highest levels of structural testing, and meets most local building codes See below to reverse handing of latch.…

Ashland XP-25 Sentinel Multipoint Lock 56-100


Ashland XP-25 Sentinel Multipoint Lock has 2-3/8" backset. Welded Steel Deadbolt. Faceplace Wid......see more

Ashland XP-25 Sentinel Multipoint Lock has 2-3/8" backset. Welded Steel Deadbolt. Faceplace Width 20mm(0.787). Does not include top and bottom shootbolts. Known Markings: Patent: 6.209.931. Caradco 4101341. Ashland Lock W5100-STACT4. Commonly used on Jeldwen doors, Caradco, Therma-Tru and others.
If you are unsure of the correct lock, please call 727-386-4629 to get the proper model numbers for your door.

Features:
• Made from the finest 300 series stainless steel for superior corrosion resistance
• Incorporates the “Baby-Sitter Effect” that allows the consumer
to operate the dead bolt and extension bolts independently of each other, eliminating the necessity for the consumer to lift the lever handle and engage the shoot bolts before activating the dead bolt
• Incorporates an “Anti-Slam” device that prevents the lock
bolts from extending until the door is in the closed position, eliminating the potential for door frame damage by the consumer.
• The shoot and dead bolts extend a full one-inch to meet the highest levels of structural testing, and meets most local building codes See below to reverse handing of latch.…

Asland Inspirations Handle 13-335oRBZK-NS


New style Ashland Inspiration Handle Active Thumb Turn with Key. Color Oil Rubbed Bronze. Thumb latc......see more

New style Ashland Inspiration Handle Active Thumb Turn with Key. Color Oil Rubbed Bronze.
Thumb latch on Old style has been modified slightly. Direct replacement
Check for availability. Not always in stock call 727-386-4629
Aesthetically pleasing trim sets and high corrosion resistance Key Features: Popular transitional style that is ergonomically friendly Popular appearance with first- class finishes The home- owner can visually verify that lock is engaged with 90-degree thumb-turn rotation The thumb-turn is located above the handle for convenience and ease of use With a Schlage C-keyway cylinder, homeowners can key all doors alike Integrated key cylinder housing prevents air and water infiltration and offers superior security Gasket behind escutcheon plate reduces air infiltration from the exterior Weep hole on exterior escutcheon plate prevents water collection.
Not always in stock call 727-386-4629.…

Astragal Boot 16-911RH


Astragal boot, right hand.  Special order only, allow 3 to 4 weeks to ship.......see more

Astragal boot, right hand.  Special order only, allow 3 to 4 weeks to ship.…

Athinai M156 Handle 2439033


Hoppe Athani Handle Only, Single Handle, Polished Chrome  Hoppe M156 Athani series sing......see more

Hoppe Athani Handle Only, Single Handle, Polished Chrome  Hoppe M156 Athani series single handle, non-handed. Solid Brass. All handles include set screw and 3mm hex wrench.…

Atlas - Portalume Patio Door Roller 9-277


Sliding door roller assembly with 7/8" concave steel wheel used on Atlas and Portalume patio do......see more

Sliding door roller assembly with 7/8" concave steel wheel used on Atlas and Portalume patio doors. 2-13/16" Length.…

Atrium Face Guide 900-6901


Atrium window face guide. Color: Black. Also used on Phillips windows. Priced each individually.......see more

Atrium window face guide. Color: Black. Also used on Phillips windows.
Priced each individually.…

Atrium Swing Door Lockset 55-126PB


Atrium Swing Door Handle and Lockset. An exact replacement for Atrium Door. Color Polished Brass.&nb......see more

Atrium Swing Door Handle and Lockset. An exact replacement for Atrium Door. Color Polished Brass. Uses SC-1 Keyway. Fits doors from 1-3/8" to 1-7/8" thick. Includes handle set, key cylinder, mortise lock strike plate, bushings, dust caps and screws. Measurements:
Mortise Lock Backset: 1-3/4".
Mortise Lock Face Plate Width: 24mm.
Mortise Lock Screw Holes: 8-3/4".
Mortise Lock Faceplate Length: 9-5/8"…

Atrium Swing Door Lockset 55-126PC


Atrium Swing Door Handle and Lockset. An exact replacement for Atrium Door. Color Polished Chrome.&n......see more

Atrium Swing Door Handle and Lockset. An exact replacement for Atrium Door. Color Polished Chrome. Uses SC-1 Keyway. Fits doors from 1-3/8" to 1-7/8" thick. Includes handle set, key cylinder, mortise lock strike plate, bushings, dust caps and screws. Measurements:
Mortise Lock Backset: 1-3/4".
Mortise Lock Face Plate Width: 24mm.
Mortise Lock Screw Holes: 8-3/4".
Mortise Lock Faceplate Length: 9-5/8"…

Atrium Swing Door Lockset 55-126SNK


Atrium Swing Door Handle and Lockset. An exact replacement for Atrium Door. Color Satin Nickel. ......see more

Atrium Swing Door Handle and Lockset. An exact replacement for Atrium Door. Color Satin Nickel. Uses SC-1 Keyway. Fits doors from 1-3/8" to 1-7/8" thick. Includes handle set, key cylinder, mortise lock strike plate, bushings, dust caps and screws. Measurements:
Mortise Lock Backset: 1-3/4".
Mortise Lock Face Plate Width: 24mm.
Mortise Lock Screw Holes: 8-3/4".
Mortise Lock Faceplate Length: 9-5/8"…

Atrium Window Lock Keeper 50-2023W


Atrium window sash lock keeper. 2" Mounting Hole Centers. Color: White. Top mount window keeper......see more

Atrium window sash lock keeper. 2" Mounting Hole Centers. Color: White. Top mount window keeper. Used with Atrium window lock 50-1269W.…

Atrium Window Sash Lock 50-1269W


Atrium window sash lock with 1-7/8" hole centers. Color: White. Zinc die cast. Use wi......see more

Atrium window sash lock with 1-7/8" hole centers. Color: White. Zinc die cast. Use with Atrium window keeper 50-2023W.…

Attaching Clip 60-704M


Attaching clip usually needed for the 60-AX balances.......see more

Attaching clip usually needed for the 60-AX balances.…

ATW Ext 2 inch  Length Al 33-131


Atw ext 2inch length al - atw extension link only male to female 3/8inch spline.......see more

Atw ext 2inch length al - atw extension link only male to female 3/8inch spline.…

ATW Ext 6 inch Length White 33-132


Atw ext 6inch color White - atw extension link only male to female 3/8 inch spline.......see more

Atw ext 6inch color White - atw extension link only male to female 3/8 inch spline.…

Auto-Release Strike Brass 8783867


Hoppe Auto-Release strike plate Brass finish.......see more

Hoppe Auto-Release strike plate Brass finish.…

Automatic Four Roller Hoppe Gear 8778939


Hoppe Multipoint 1.38" Backset Automatic Gear with Bottom Two Roller Extension Aut......see more

Hoppe Multipoint 1.38" Backset Automatic Gear with Bottom Two Roller Extension Automatic version engages multipoint when door is closed. The HLS®9000 four roller version is easily adjusted with the simple turn of an hex wrench for improved weather sealing. The four roller version offers the same benefits as the two roller version with two additional locking points for added security and additional weather sealing. If you need help locating the the part for your door, please fill out this Hoppe Questionnaire and call or email to sales@windowanddoorparts.us. Link to the Complete pdf for the 16mm Faceplate Automatic Four Roller Parts Part
Number Des- cription Backset Deadbolt
Throw Handle
Height Bottom
Roller
Pos. #1 Bottom
Roller
Pos. #2 Max.
Cutoff 8778883 M/35/14 914 RLR 400/750 16S 60 35mm
(1.38) 14mm
(.55) 914mm
(36.00) 400mm
(15.75) 750mm
(29.65) 60mm
(2.36) …

Automatic Four Roller Hoppe Top Extension 8778903


Hoppe Top Extension Automatic Two Roller 48.03" Automatic version engages multipoint wh......see more

Hoppe Top Extension Automatic Two Roller 48.03" Automatic version engages multipoint when door is closed. The HLS®9000 four roller version is easily adjusted with the simple turn of an hex wrench for improved weather sealing.The four roller version offers the same benefits as the two roller version with two additional locking points for added security and additional weather sealing. If you need help locating the the part for your door, please fill out this Hoppe Questionnaire and call or email to sales@windowanddoorparts.us. Link to the Complete pdf for the 16mm Faceplate Automatic Four Roller Parts  Roller Top  Extension 16mm Faceplate Part Number  Description  Overall Length with 914mm (36”) Handle Height) Extension Length  Handle to Top of Door  Top Roller Pos. #1 Top Roller Pos. #2  Maximum Cutoff  8778903 A 1220 RLR 400/800 16S 380 1795mm - 2175mm
(70.67 - 85.63) 1220mm
(48.03) 1261mm
(49.65) 400mm
(15.75) 800mm
(31.50) 380mm
(14.96) …

Automatic Screen Door Closer 16-303


Automatic screen door closer with screws. Color: Black. Fits patio screen doors 36" and la......see more

Automatic screen door closer with screws. Color: Black. Fits patio screen doors 36" and larger. Simple Installation takes only minutes. Block and tackle design provides smooth operation.…

Automatic Secury Multipoint Door Lock  854-15710


GU Secury Automatic Multipoint Lock 1.77" Backset with Latch Bolts. With Round Facepl......see more

GU Secury Automatic Multipoint Lock 1.77" Backset with Latch Bolts. With Round Faceplate Edges. 6' 8" Door. One-piece Secury automatic door lock for lever handles for a 6' 8" tall door. The automatic door lock works by simply closing the door and the latchbolts instantly throw 20mm and are secured to prevent them being forced back. By turning the key from the outside or the knob from the inside, it will engage the 1” central deadbolt and lock the top and bottom latches to become a 3 deadbolt locking system. America version, key above the handle. Made for an 6' 8" door. Faceplate has round edges. Stainless steel faceplate finish. Additional information:
3-point, one piece locking system for 6' 8'' doors.
Heavy duty mortise construction with reinforced lever return spring system.
Locking by US-cylinder with 90° turn of key or thumb-turn.
No lifting of handle to engage locking points.
Top and bottom Automatic latchbolts projection from 10 to 20mm: - provide security against forced entry - help prevent air infi ltration from gasket - protect the door panel from warping.
1'' (25mm) throw on deadbolt with baby sitting function.
Non handed, latch easily reversible.
8mm square spindle. 92mm centres (spindle to cylinder).
Handle height variable (36'' recommended).
16mm stainless steel faceplate with radius ends for easy installation and cleaner look.
Same hardware groove detail throughout our entire door lock program (jig, router base and bits available).
Extension with additional lock point is available for doors taller than 8' (6-33479-04-0-8B).
To be used with lever handle set (US-cylinder above handle). ***Special order. Non-returnable. Allow 3 to 4 weeks to ship. If you need help identifying the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us.     GU  Number Description Backset Deadbolt Throw Handle Height Bottom Latch Bolt Position Top Latch Bolt Position Overall
Length 854-15710 6-35856-01-R-8B 45mm
(1.77) 25.4mm
(1.00) Adjustable 543mm
(21.38) 792mm
(31.18) 1590mm
(62.68)  …

Automatic Secury Multipoint Door Lock 854-15530


GU Secury Automatic Multipoint Lock 2.38" Backset with Latch Bolts. Round Faceplate E......see more

GU Secury Automatic Multipoint Lock 2.38" Backset with Latch Bolts. Round Faceplate Edges. 8 Ft Door One-piece Secury automatic door lock for lever handles for a 8' tall door. The automatic door lock works by simply closing the door and the latchbolts instantly throw 20mm and are secured to prevent them being forced back. By turning the key from the outside or the knob from the inside, it will engage the 1” central deadbolt and lock the top and bottom latches to become a 3 latch deadbolt locking system. America version, key above the handle. Made for an 8' door. Faceplate has round edges. Stainless steel faceplate finish. Additional information:
3-point, one piece locking system for 8' doors. Heavy duty mortise construction with reinforced lever return spring system.
Locking by US-cylinder with 90° turn of key or thumb-turn.
No lifting of handle to engage locking points.
Top and bottom Automatic latchbolts projection from 10 to 20mm: - provide security against forced entry - help prevent air infi ltration from gasket - protect the door panel from warping.
1'' (25mm) throw on deadbolt with baby sitting function.
Non handed, latch easily reversible.
8mm square spindle. 92mm centres (spindle to cylinder).
Handle height variable (36'' recommended).
16mm stainless steel faceplate with radius ends for easy installation and cleaner look.
Same hardware groove detail throughout our entire door lock program.
Extension with additional lock point is available for doors taller than 8' (6-33479-04-0-8B).
To be used with lever handle set (US-cylinder above handle) If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us. ***Special order, non-returnable. Allow 3 to 4 weeks to ship. GU  Number Description Backset Deadbolt Throw Handle Height Bottom Latch Bolt Position Top Latch Bolt Position Overall 
Length 854-15530 6-35565-02-R-8B 60mm
(2.38) 25.4mm
(1.00) Adjustable 543mm
(21.38) 1102mm
(43.39) 1900mm
(74.80) …

Automatic Secury Multipoint Door Lock 854-16695


GU Secury Automatic Multipoint Lock 1.75" (45/92) Backset with Latch Bolts. Round Fac......see more

GU Secury Automatic Multipoint Lock 1.75" (45/92) Backset with Latch Bolts. Round Faceplate Edges. For 8 Ft Door One-piece Secury automatic door lock for lever handles for a 8' tall door. The automatic door lock works by simply closing the door and the latchbolts instantly throw 20mm and are secured to prevent them being forced back. By turning the key from the outside or the knob from the inside, it will engage the 1” central deadbolt and lock the top and bottom latches to become a 3 latch deadbolt locking system. America version, key above the handle. Made for an 8' door. Faceplate has round edges. Stainless steel faceplate finish. Additional information:
3-point, one piece locking system for 8' doors. Heavy duty mortise construction with reinforced lever return spring system.
Locking by US-cylinder with 90° turn of key or thumb-turn.
No lifting of handle to engage locking points.
Top and bottom Automatic latchbolts projection from 10 to 20mm: - provide security against forced entry - help prevent air infi ltration from gasket - protect the door panel from warping.
1'' (25mm) throw on deadbolt with baby sitting function.
Non handed, latch easily reversible.
8mm square spindle. 92mm centres (spindle to cylinder).
Handle height variable (36'' recommended).
16mm stainless steel faceplate with radius ends for easy installation and cleaner look.
Same hardware groove detail throughout our entire door lock program.
Extension with additional lock point is available for doors taller than 8' (6-33479-04-0-8B).
To be used with lever handle set (US-cylinder above handle) If you need help locating the correct part for your door, please call 727-386-4629 or email G-U Questionnaire to sales@windowanddoorparts.us. ***Special order, non-returnable. Allow 3 to 4 weeks to ship. GU  Number Description Backset Deadbolt Throw Handle Height Bottom Latch Bolt Position Top Latch Bolt Position Overall 
Length 854-16695 6-35856-02-R-8B 45mm
(1.75) 25.4mm
(1.00) Adjustable 543mm
(21.38) 1102mm
(43.39) 1900mm
(74.80) …

Automatic Tongue Hoppe Gear 8778243


Hoppe Multipoint 1.38" Backset, Automatic Gear with 29.65" Tongue Position and Bottom Exte......see more

Hoppe Multipoint 1.38" Backset, Automatic Gear with 29.65" Tongue Position and Bottom Extension Automatic version engages multipoint on their own when the door is closed, without having to lift the handle. Automatic versions have a roller about 6-1/2" above the latch.
While offering security in the locked position, the HLS9000 tongue retracts when opened, giving a smooth clean appearance. If you need help selecting the correct part for your door, please fill out this Hoppe Questionnaire and call or email back to sales@windowanddoorparts.us.  Link to the Complete pdf for the 16mm Faceplate Automatic Tongue Version Parts Hoppe  Number Description Backset Deadbolt Throw Handle Height Bottom Tongue Position Max Cutoff 8778243 A/35/25 914 TN 753 16S 30 35mm  1.38" 25mm  1.00" 914mm  36" 753mm  29.65" 30mm  1.18" …

Automatic Tongue Hoppe Gear 8778267


Hoppe Multipoint 1.38" Backset, Automatic Gear with 29.65" Tongue Position and Bottom Exte......see more

Hoppe Multipoint 1.38" Backset, Automatic Gear with 29.65" Tongue Position and Bottom Extension. Automatic version engages multipoint on their own when the door is closed, without having to lift the handle. Automatic versions also have a roller about 6-1/2" above the latch.
While offering security in the locked position, the HLS9000 tongue retracts when opened, giving a smooth clean appearance. If you need help selecting the correct part for your door, please fill out this Hoppe Questionnaire and call or email back to sales@windowanddoorparts.us.  Link to the Complete pdf for the 16mm Faceplate Automatic Tongue Version Parts Hoppe  Number Description Backset Deadbolt Throw Handle Height Bottom Tongue Position Max Cutoff 8778267 A/35/14 914 TN 753 16S 30 35mm 
1.38" 14mm 
0.55" 914mm 
36" 753mm 
29.65" 30mm 
1.18" …

Automatic Tongue Hoppe Gear 8778287


Hoppe Multipoint 1.77" Backset, Automatic Gear with 29.65" Tongue Position and Bottom Exte......see more

Hoppe Multipoint 1.77" Backset, Automatic Gear with 29.65" Tongue Position and Bottom Extension Automatic version engages multipoint on their own when the door is closed, without having to lift the handle. Automatic versions also have a roller about 6-1/2" above the latch. 
While offering security in the locked position, the HLS9000 tongue retracts when opened, giving a smooth clean appearance. If you need help selecting the correct part for your door, please fill out this Hoppe Questionnaire and call or email back to sales@windowanddoorparts.us.  Link to the Complete pdf for the 16mm Faceplate Automatic Tongue Version Parts Hoppe  Number Description Backset Deadbolt Throw Handle Height Bottom Tongue Position Max Cutoff 8778287 A/45/25 914 TN 753 16S 30 45mm
(1.77) 25.4mm
(1.00) 914mm
(36.00) 753mm
(29.65) 30mm
(1.18) …

Automatic Tongue Hoppe Gear 8778291


Hoppe Multipoint 1.77" Backset, Automatic Gear with 26.42" Tongue Position and Bottom Exte......see more

Hoppe Multipoint 1.77" Backset, Automatic Gear with 26.42" Tongue Position and Bottom Extension Automatic version engages multipoint on their own when the door is closed, without having to lift the handle. Automatic versions also have a roller about 6-1/2" above the latch.
While offering security in the locked position, the HLS9000 tongue retracts when opened, giving a smooth clean appearance. If you need help selecting the correct part for your door, please fill out this Hoppe Questionnaire and call or email back to sales@windowanddoorparts.us.  Link to the Complete pdf for the 16mm Faceplate Automatic Tongue Version Parts Hoppe  Number Description Backset Deadbolt Throw Handle Height Bottom Tongue Position Max Cutoff 8778291 A/45/25 914 TN 671 16S 115 45mm
(1.77) 25.4mm
(1.00) 914mm  36" 671mm
(26.42) 115mm
(4.53) …

Automatic Tongue Hoppe Gear 8778303


Hoppe Multipoint 1.77" Backset, Automatic Gear with 26.42" Tongue Position and Bottom Exte......see more

Hoppe Multipoint 1.77" Backset, Automatic Gear with 26.42" Tongue Position and Bottom Extension Automatic version engages multipoint on their own when the door is closed, without having to lift the handle. Automatic versions also have a roller about 6-1/2" above the latch.
While offering security in the locked position, the HLS9000 tongue retracts when opened, giving a smooth clean appearance. If you need help selecting the correct part for your door, please fill out this Questionnaire and call or email back to sales@windowanddoorparts.us. Hoppe Questionnaire  Link to the Complete pdf for the 16mm Faceplate Automatic Tongue Version Parts Hoppe  Number Description Backset Deadbolt Throw Handle Height Bottom Tongue Position Max Cutoff 8778303 A/45/14 914 TN 671 16S 115 45mm
(1.77) 14mm  (0.55") 914mm  (36") 671mm  (26.42") 115mm  (4.53") …

Automatic Tongue Hoppe Top Extension 8778407


Hoppe Automatic Tongue Top Extension with Top Tongue position at 33.11". For doors from 71.06&q......see more

Hoppe Automatic Tongue Top Extension with Top Tongue position at 33.11". For doors from 71.06" to 77.87" tall. Extension Length: 40.27". Automatic version engages multipoint when door is closed. While offering security in the locked position, the HLS®9000 tongue version retracts when opened, giving a smooth clean appearance. ***Special order, allow 3 to 4 weeks to ship.
  If you need the exact part please fill out this Questionnaire and call or email back to sales@windowanddoorparts.us. Hoppe Questionnaire  Link to the Complete pdf for the 16mm Faceplate Automatic Tongue Version Parts   Automatic Tongue Top  Extension 16mm Faceplate Part Number  Description  Overall Length with 914mm (36”) Handle Height) Extension Length  Handle to Top of Door  Top Tongue Position  Maximum Cutoff  8778407 A 1023 TN 841 16S 1805mm-2000mm
(71.06 - 77.87) 1023mm
(40.27) 1064mm
(41.89) 841mm
(33.11) NA …

Automatic Tongue Hoppe Top Extension 8778583


Hoppe Automatic Tongue Top Extension with Top Tongue position at 29.25". For doors from 71.06&q......see more

Hoppe Automatic Tongue Top Extension with Top Tongue position at 29.25". For doors from 71.06" to 85.63" tall. Extension Length: 48.03". Automatic version engages multipoint when door is closed. While offering security in the locked position, the HLS®9000 tongue version retracts when opened, giving a smooth clean appearance. If you need the exact part please fill out this Questionnaire and call or email back to sales@windowanddoorparts.us. Hoppe Questionnaire  Link to the Complete pdf for the 16mm Faceplate Automatic Tongue Version Parts Automatic Tongue Top  Extension 16mm Faceplate Part Number  Description  Overall Length with 914mm (36”) Handle Height) Extension Length  Handle to Top of Door  Top Tongue Position  Maximum Cutoff  8778583 A 1220 TN 743 16S 370 1805mm - 2175mm
(71.06 - 85.63) 1220mm
(48.03) 1261mm
(49.65) 743mm
(29.25) 370mm
(14.57) …

Automatic Tongue Hoppe Top Extension 8778591


Hoppe Automatic Tongue Top Extension with Top Tongue position at 37.20". For doors from 79.13&q......see more

Hoppe Automatic Tongue Top Extension with Top Tongue position at 37.20". For doors from 79.13" to 99.41" tall. Extension Length: 61.81". Automatic version engages multipoint when door is closed. While offering security in the locked position, the HLS®9000 tongue version retracts when opened, giving a smooth clean appearance. If you need the exact part please fill out this Questionnaire and call or email back to sales@windowanddoorparts.us. Hoppe Questionnaire  Link to the Complete pdf for the 16mm Faceplate Automatic Tongue Version Parts Automatic Tongue Top  Extension 16mm Faceplate Part Number  Description  Overall Length with 914mm (36”) Handle Height) Extension Length  Handle to Top of Door  Top Tongue Position  Maximum Cutoff  8778591 A 1570 TN 945 16S 515 2010mm - 2525mm
(79.13 - 99.41) 1570mm
(61.81) 1611mm
(63.43) 945mm
(37.20) 515mm
(20.28) …

Manufacturers
  • 0 items