What is the difference between Sash Controls 2265
Offset and Center Latch Handles?
Look Closely and you will notice the Thumb Latch position is different.
13-291 series is located directly center of the 2 mounting screws CENTER LATCH
13-245 series is located BELOW center of the mounting screws OFFSET LATCH
Patio door handle set Offset latch. Brass Plated handle For 1-3/4 inch door Number stamped on back of plate 2265
This handle fits doors that are 1 3/4 inches thick.
Purchase 2 or more you can have the handles keyed the same. Please measure your door for thickness if under 1 3/4 inches thick inside to outside let us know we will cut the tabs so the lock will fit. Once cut you cannot return the handle.
Default selection is NOT Keyed alike.
Special Features: An industry legend, the Legacy series was the first handle to challenge the market previously dominated by wood grip handle offerings. This timeless look still remains very popular with homeowners due to the face it blends nicely with both contemporary and traditional styling. The patented, slotted thumb turn design allows for off-set fabrication to achieve a deeper stile penetration into the jamb.
Purchasing more that 1 handle?
Do you want them all keyed the same?:
Please check the Thumb lock position to your old Handle
How to check:
Look on the back of the inside Interior handle where the thumb latch passes through. There are 2 slots 1 marked "A" and 1 marked "B".
If "B" (Lower Latch slot) is where your Thumb latch passes through you have an Offset Latch.
If "A" (Upper Latch Slot) is where your Thumb lock goes through? You have a Center Latch and this handle will not work.
Here is the link for Sach Controls Center Latch products 13-291